iMeshbean 1380W Low Profile Magnetic vs iMeshbean 1400W 2-Inch Magnetic Drill (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the imeshbean 1380w low profile magnetic vs 1400w 2 inch magnetic drill for metalworking tasks. Both units feature strong magnetic bases and pure copper motors for drilling steel and iron. The main difference lies in their physical design and capacity. One model prioritizes a compact, low-profile shape for tight spaces with a 1.4-inch hole limit. The other offers a larger 2-inch boring diameter and variable speed control. You must choose based on your specific hole size and workspace requirements.
Key differences
| Aspect | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Hole Capacity | 1.4 in (35 mm) | 2 in (50 mm) |
| Spindle Speed | 680 RPM | 0-810 RPM |
| Magnetic Force | 2585 lbf (11500N) | 2922 lbf (13000N) |
| Design | Low Profile | Standard |
| Chuck Capacity | 3/4 in | not listed |
Which one should you choose?
Choose iMeshbean 1380W Low Profile Magnetic Drill Press if
- You need to drill in tight, hard-to-reach areas where space is limited
- You primarily work with smaller diameter holes up to 1.4 inches
- You prefer a lighter, more compact unit for easy portability
Choose iMeshbean 1400W 2-Inch Magnetic Drill Press if
- You require a larger boring diameter of up to 2 inches
- You need variable speed control for different materials or bit types
- You want maximum magnetic holding force for heavy-duty vertical drilling
Verdict: Choose the low-profile model if your work involves confined spaces or smaller holes. Select the 2-inch model if you need higher capacity and variable speed versatility. Both machines offer reliable magnetic stability for industrial metalworking.
Mag Drill Specs Compared
Motor Wattage
The iMeshbean 1400W model offers a slightly higher motor rating at 1400W, compared to the 1380W unit in the low-profile version. This 20W difference is minimal in real-world performance, but it suggests the larger unit may sustain heavy loads with slightly more reserve power. Both machines use pure copper motors, which ensures efficient heat dissipation and long-term durability. For most steel drilling tasks, either motor provides ample torque. The extra wattage on the 1400W model is a small technical advantage, but you will not notice a drastic change in cutting speed for standard hole sizes.
Hole Capacity
Drilling capacity is the most significant difference between these two tools. The iMeshbean 1400W 2-Inch Magnetic Drill Press can bore holes up to 2 inches (50mm) in diameter. In contrast, the iMeshbean 1380W Low Profile model is limited to a maximum hole capacity of 1.4 inches (35mm). If your projects require large-diameter annular cutter work, the 2-inch model is the only viable choice. The smaller unit is sufficient for general maintenance and smaller bolt holes. This capacity gap defines the upper limit of what each machine can physically achieve on thick steel plates.
Magnetic Force
Security against movement relies on magnetic pull. The iMeshbean 1400W 2-Inch model generates 13000N, which converts to approximately 2922 lbf of attraction force. The 1380W Low Profile unit provides 11500N, or 2585 lbf. While both forces are strong enough for vertical and overhead drilling on clean steel, the 1400W model offers roughly 12% more holding power. This extra margin can be beneficial when drilling on slightly uneven surfaces or when applying higher feed pressure. Both units feature safety interlocks, but the higher pull weight gives the larger drill a slight edge in stability.
Speed Settings
Spindle speed ranges differ between the two models. The 1380W Low Profile drill has a fixed maximum speed of 680 RPM. The 1400W 2-Inch model offers variable speed settings ranging from 0 to 810 RPM. Variable speed allows you to optimize RPM for different hole diameters and materials, improving cut quality and bit life. The fixed speed on the 1380W unit is adequate but less flexible. If you frequently switch between small pilot holes and larger cuts, the variable speed control on the 1400W model provides better operational control and precision for various annular cutter sizes.
Build and Portability
Physical dimensions dictate where you can use these tools. The 1380W Low Profile model is designed for tight spaces, measuring 11 inches in length and 8.3 inches in height. It weighs 28 pounds. The 1400W 2-Inch model is wider at 14.2 inches and taller at 10.6 inches, though it shares the same 28-pound weight. The low-profile design allows the smaller unit to fit into confined areas where the larger drill cannot reach. However, the larger model includes a lifting handle and non-slip crank handles, which may ease transport and operation despite its bulk. Choose the low-profile unit for access, and the larger one for raw capacity.
Choose Your iMeshbean Magnetic Drill
Tight space and portability needs
You need a low profile design for confined areas. This unit measures 3.9 inches wide and 8.3 inches tall. It weighs 28 pounds and features a detachable design for easy storage. The 1.4-inch hole capacity suits smaller tasks, while the 2585 lbf magnetic force ensures stability in hard-to-reach spots.
Large diameter drilling requirements
You require a 2-inch boring diameter for larger holes. This model offers 0-810 RPM variable speed and a 1400W motor. It provides 2922 lbf of magnetic pull for secure anchoring. The 50mm drilling depth handles deeper cuts. You also get six included drill bits for immediate use on various metal thicknesses.
Heavy industrial steel construction
You need maximum power for shipbuilding or bridge work. The 1400W motor and 13000N magnetic force offer robust performance. Variable speed control allows precision boring. The overload protection and cooling system safeguard the unit during extended operation. The wider footprint supports heavier loads compared to the compact alternative.
The products compared
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: Shallow drilling in tight industrial spaces
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press Affiliate link
The iMeshbean 1380W low profile magnetic drill press offers a 1.4-inch hole capacity and 680 RPM spindle speed. Its 2585 lbf magnetic base ensures stability on steel. The compact design fits tight spaces, making it suitable for industrial or home use. You get a 3/4-inch chuck capacity and 1.8-inch spindle travel for deep drilling tasks.
Pros
- 1380W pure copper motor delivers up to 680 RPM.
- 2585 lbf magnetic force with double-coil safety design.
- Compact low profile design fits tight spaces.
Cons
- 1.4-inch hole capacity is smaller than 2-inch competitors.
- Heavier build at 28 pounds reduces portability.
- Lower 680 RPM speed limits deep hole efficiency.
Good fit if
- You need a drill for tight, hard-to-reach areas.
- You require strong magnetic stability on steel surfaces.
- You perform frequent shallow drilling tasks.
Skip if
- You need to drill holes larger than 1.4 inches.
- You prioritize maximum speed for deep core drilling.
- You need a lighter unit for frequent transport.
Verdict: iMeshbean 1380W Low Profile Mag Drill fits users who need stability in tight spaces rather than maximum hole size. It suits shallow drilling on steel where its strong magnetic base matters most.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: heavy-duty steel drilling up to 2 inches
- Motor Power
- 1400W
- Spindle Speed
- 0-810 RPM
- Hole Capacity
- 2"
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
View on Amazon: iMeshbean 1400W 2-Inch Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill features a 1400W motor and a 2-inch hole capacity. It generates 13000N of magnetic force to secure itself on steel surfaces. The spindle speed ranges from 0 to 810 RPM. It includes six drill bits for various diameters. The unit weighs 28 pounds and measures 14.2 inches wide. It suits users drilling through rigid metal materials in construction or industrial settings.
Pros
- 1400W motor provides strong power for rigid materials
- 13000N magnetic force anchors tightly to steel
- 2-inch boring diameter handles large holes
- Variable speed control from 0-810 RPM
Cons
- Lower 810 RPM max speed compared to faster models
- Heavier 28-pound build limits portability
- Limited to 2-inch hole capacity
Good fit if
- You need high magnetic holding power for vertical drilling
- You drill holes up to 2 inches in metal
- You work with rigid steel structures
Skip if
- You require speeds higher than 810 RPM
- You need to drill holes larger than 2 inches
- You prioritize a lightweight tool under 20 pounds
Verdict: iMeshbean 1400W 2-Inch Magnetic Drill delivers strong holding force and power for large holes. It fits users who need stability on steel surfaces for heavy-duty metal drilling tasks.
Specifications side by side
| Spec | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Spindle Speed | 680 RPM | 0-810 RPM |
| Hole Capacity | 1.4 in (35 mm) | 2" |
| Spindle Travel | 1.8 in (45 mm) | not stated |
| Magnetic Force | 2585 lbf (11500N) | 2922lbf / 13000N |
| Chuck Capacity | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic |
| Speed Settings | not stated | Variable Speed |
| Target Material | Metal | Metal |
| Design | Low Profile | not stated |
| Dimensions | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 28 pounds | 28 pounds |
| Color | multi | multi |
| Model | WF23824 | WF21456 |
Frequently asked questions
Which iMeshbean magnetic drill is better for tight spaces?
The iMeshbean 1380W Low Profile Magnetic Drill Press is the better choice for confined areas. Its compact design measures 3.9 inches wide and 8.3 inches tall. This low-profile shape allows you to drill in shallow industrial spaces where larger tools cannot fit. It prioritizes stability in tight quarters over maximum hole size.
Can the 1400W model drill 2-inch holes in steel?
Yes, the iMeshbean 1400W 2-Inch Magnetic Drill Press is designed for this task. It delivers strong holding force and power specifically for heavy-duty metal drilling. You can use it for large holes up to two inches in steel surfaces. It is built to handle the demands of thick steel workpieces.
Do both drills weigh the same?
Yes, both models weigh exactly 28 pounds. This identical weight ensures similar portability and handling characteristics. You can carry either unit with comparable effort. The weight distribution may differ due to their distinct shapes, but the total mass remains constant across both the low-profile and the standard 2-inch versions.
Is the 1400W drill variable speed?
Yes, the iMeshbean 1400W 2-Inch Magnetic Drill Press features variable speed settings. This allows you to adjust the rotation rate based on your material and hole size. The low-profile 1380W model does not list variable speed in its specifications. Check the manual for the exact speed ranges if precise control is critical.
What is the main size difference between the two drills?
The primary difference is their physical footprint and orientation. The 1380W model is 11 inches long, 3.9 inches wide, and 8.3 inches tall. The 1400W model is 4.7 inches long, 14.2 inches wide, and 10.6 inches tall. The 1380W is taller and narrower, while the 1400W is wider and shorter.
Which drill is best for heavy-duty steel work?
The iMeshbean 1400W 2-Inch Magnetic Drill Press is best for heavy-duty steel work. It offers higher wattage and is explicitly rated for 2-inch holes. This model provides the power and stability needed for demanding metal drilling tasks. The 1380W version is better suited for shallow drilling in restricted spaces.
Do both models use magnetic configurations?
Yes, both units utilize a magnetic configuration. They attach securely to steel and iron surfaces using strong magnetic bases. This allows for hands-free operation and precise drilling angles. You can rely on the magnetic hold for stability during operation, regardless of which model you choose.