iMeshbean Magnetic Drill Press or iMeshbean 1380W Low Profile Magnetic? Which iMeshbean Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing between the imeshbean magnetic drill press vs 1380w low profile magnetic model depends on your specific drilling needs. Both units share a 28-pound weight and pure copper motors for reliable metal drilling. The main difference lies in their design and capacity. One model prioritizes a compact, low-profile shape for tight spaces, while the other offers a larger 2-inch hole capacity and more advanced features like stepless speed control. You must decide which spec matters most for your projects.
Key differences
| Aspect | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Hole Capacity | 1.4 in | 2 in |
| Spindle Speed | 680 RPM | 810 RPM |
| Speed Control | Fixed speed | Stepless (10 speeds) |
| Magnetic Force | 2585 lbf | 2922 lbf |
| Dimensions | 11 x 3.9 x 8.3 in | 14.2 x 4.7 x 10.6 in |
Which one should you choose?
Choose iMeshbean 1380W Low Profile Magnetic Drill Press if
- You need a compact unit for tight spaces
- You prefer a lighter, portable design
- You drill holes under 1.4 inches
Choose iMeshbean 1400W 2-Inch Magnetic Drill Press if
- You require larger 2-inch hole capacity
- You want adjustable stepless speed control
- You need higher magnetic holding force
Verdict: Choose the 1380W Low Profile model if space and portability are your top priorities. Select the 1400W model if you need greater hole capacity, adjustable speeds, and stronger magnetic force. Both machines are built for heavy-duty metal drilling.
iMeshbean Mag Drill Comparison
Motor wattage
You get slightly more power with the iMeshbean 1400W 2-Inch Magnetic Drill Press, which features a 1400W pure copper motor. This unit is designed for high-intensity work and maintains speed up to 810 RPM. The iMeshbean 1380W Low Profile Magnetic Drill Press uses a 1380W pure copper motor, reaching a maximum speed of 680 RPM. While the difference is small, the higher wattage on the 1400W model suggests greater torque potential for tougher materials. Both motors are wound with pure copper wire for durability.
Hole capacity
The iMeshbean 1400W 2-Inch Magnetic Drill Press handles larger holes with a 2-inch maximum core drilling diameter. This makes it suitable for heavy industrial tasks requiring wider bores. In contrast, the iMeshbean 1380W Low Profile Magnetic Drill Press has a maximum core drilling diameter of 1.4 inches (35 mm). If you frequently drill large-diameter holes in steel or stainless steel, the 2-inch capacity of the 1400W model offers significantly more versatility. The 1.4-inch limit on the low-profile unit is sufficient for smaller, precise work but less flexible for larger projects.
Spindle speed
The iMeshbean 1400W 2-Inch Magnetic Drill Press operates at a faster maximum spindle speed of 810 RPM. It also offers stepless speed control with ten adjustable settings, allowing you to fine-tune the rotation for different materials. The iMeshbean 1380W Low Profile Magnetic Drill Press runs at a lower maximum speed of 680 RPM. While both machines are designed for metal drilling, the higher RPM and variable speed options on the 1400W model provide better adaptability for varying drilling conditions and material hardness.
Magnetic force
Both drills provide strong magnetic attraction, but the iMeshbean 1400W 2-Inch Magnetic Drill Press offers higher holding power. It generates a magnetic force of 2922 lbf (13000N) using a dual-coil pure iron base. The iMeshbean 1380W Low Profile Magnetic Drill Press provides 2585 lbf (11500N) of attraction. Both units include safety features that prevent the motor from running if the magnetic base is not engaged. The stronger pull of the 1400W model ensures greater stability when drilling at angles or in overhead positions.
Physical profile
The iMeshbean 1380W Low Profile Magnetic Drill Press is designed for tight spaces. It measures 8.3 inches in height and 3.9 inches in width, fitting into hard-to-reach areas easily. Its detachable design aids portability and storage. The iMeshbean 1400W 2-Inch Magnetic Drill Press is taller at 10.6 inches and wider at 14.2 inches, making it bulkier. While both weigh 28 pounds, the low-profile model is clearly superior if you need to drill in confined industrial environments or on uneven structures where height is a constraint.
Chuck capacity
The iMeshbean 1380W Low Profile Magnetic Drill Press specifies a chuck capacity of 3/4 inch. This limits the size of the annular cutters or drill bits you can use. The iMeshbean 1400W 2-Inch Magnetic Drill Press does not list a specific chuck capacity in its published specifications, though it supports a 2-inch hole diameter. This implies it accepts larger tooling. If you need to use standard 3/4-inch cutters exclusively, both work, but the 1400W model likely accommodates larger shanks for its 2-inch capacity.
Which iMeshbean Mag Drill Suits You
Tight space and portability needs
The iMeshbean 1380W Low Profile model measures 8.3 inches in height and 11 inches in length. Its compact dimensions allow it to fit into confined areas that larger units cannot reach. Weighing 28 pounds, it remains portable while offering a 1.4-inch hole capacity for standard metal drilling tasks.
Large diameter hole requirements
The iMeshbean 1400W 2-Inch Magnetic Drill Press handles up to a 2-inch hole diameter. This capacity exceeds the 1.4-inch limit of the low-profile model. Its 1400W motor supports higher speeds up to 810 RPM, making it better suited for larger core drilling operations in thick steel structures.
Adjustable speed and depth control
This model features stepless speed control with ten distinct settings, allowing precise adjustments for different materials. It includes reversible direction switching and a self-locking spindle for quick bit changes. The double dovetail guide rails provide smooth, jam-free vertical adjustment for varying drilling depths and rigidity.
Maximum magnetic holding force
The iMeshbean 1400W unit delivers a magnetic attraction force of 2922 lbf (13000N). This is significantly stronger than the 1380W model's 2585 lbf (11500N). The double-coil pure-iron base with built-in insulation ensures stable attachment to vertical or overhead surfaces during heavy-duty drilling operations.
The products compared
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: tight space portable steel drilling
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill press features a 1380W motor and a 2585 lbf magnetic base. It offers a 1.4-inch hole capacity and 680 RPM speed. The low profile design fits tight spaces. It weighs 28 pounds. You should buy this if you need portable drilling for steel or stainless steel. It suits industrial or home use.
Pros
- 1380W pure copper motor delivers reliable power.
- 2585 lbf magnetic force secures to thick steel.
- Low profile design accesses tight work areas.
- Detachable construction aids portability and storage.
Cons
- 1.4-inch hole capacity is smaller than 2-inch competitors.
- 680 RPM speed is lower than some models.
- Chuck capacity limited to 3/4-inch.
Good fit if
- You need to drill in confined spaces.
- You work with thick steel plates.
- You require a lightweight portable unit.
Skip if
- You need to drill holes larger than 1.4 inches.
- You require high-speed drilling above 680 RPM.
- You prefer a stationary benchtop setup.
Verdict: iMeshbean 1380W Low Profile Mag Drill fits users needing access to tight spaces with moderate hole sizes. It is ideal for portable steel fabrication.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: Heavy-duty steel structure drilling
- Motor Power
- 1400W
- Spindle Speed
- 810 RPM (10 speeds)
- Hole Capacity
- 2 in
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Target Material
- Metal
View on Amazon: iMeshbean 1400W 2-Inch Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill press features a 1400W motor and delivers 2922 lbf of magnetic force. It drills holes up to 2 inches in diameter at a maximum speed of 810 RPM. The unit includes a dual-coil base and stepless speed control. It suits users needing high torque for heavy steel structures or industrial applications.
Pros
- 1400W copper motor for high-intensity drilling
- 2922 lbf magnetic force for secure attachment
- Drills up to 2-inch diameter holes
- Stepless speed control with 10 settings
- Self-locking spindle for quick bit changes
Cons
- Lower maximum spindle speed of 810 RPM
- Heavier build at 28 pounds
- Single-speed reduction gear configuration
Good fit if
- You need strong holding power for thick steel
- You require a 2-inch drilling capacity
- You work on industrial steel structures
Skip if
- You need high-speed drilling over 810 RPM
- You prefer a lighter portable unit
- You primarily drill small diameter holes
Verdict: iMeshbean 1400W Magnetic Drill Press offers robust magnetic force and a large 2-inch capacity. It fits users drilling thick steel plates who prioritize holding power over high rotational speed.
Specifications side by side
| Spec | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Spindle Speed | 680 RPM | 810 RPM (10 speeds) |
| Hole Capacity | 1.4 in (35 mm) | 2 in |
| Spindle Travel | 1.8 in (45 mm) | not stated |
| Magnetic Force | 2585 lbf (11500N) | 2922lbf / 13000N |
| Chuck Capacity | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic |
| Target Material | Metal | Metal |
| Design | Low Profile | not stated |
| Cutting Capacity | not stated | 2-Inch |
| Dimensions | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 28 pounds | 28 pounds |
| Color | multi | multi |
| Model | WF23824 | WF21456 |
Frequently asked questions
What is the maximum hole size for the iMeshbean 1400W 2-Inch Magnetic Drill Press?
The iMeshbean 1400W 2-Inch Magnetic Drill Press has a cutting capacity of 2 inches. This specification allows it to handle thick steel plates and heavy-duty structural drilling tasks. It is designed for users who prioritize holding power and large diameter holes over high rotational speeds. This makes it suitable for robust fabrication work where larger bits are required.
How compact is the iMeshbean 1380W Low Profile Magnetic Drill Press?
The iMeshbean 1380W Low Profile Magnetic Drill Press measures 8.3 inches in height and 11 inches in length. Its width is 3.9 inches. These dimensions allow it to fit into confined areas and tight spaces that larger units cannot reach. It is ideal for portable steel fabrication where access is restricted.
Do both iMeshbean magnetic drill models weigh the same?
Yes, both the iMeshbean 1380W Low Profile and the 1400W 2-Inch models weigh 28 pounds. This consistent weight helps maintain stability during operation. It also means portability is similar for both units, allowing you to move them easily between job sites while maintaining a solid base for drilling.
Which iMeshbean model is better for tight spaces?
The iMeshbean 1380W Low Profile Magnetic Drill Press is better for tight spaces. Its low profile design and compact dimensions allow it to access confined areas. The 1400W model is larger and prioritizes capacity over size. If you need to drill in restricted spots, the low profile unit is the practical choice.
What is the difference in motor power between the two models?
The iMeshbean 1400W 2-Inch model features a 1400W pure copper motor, while the low profile version has a 1380W motor. The 1400W unit offers slightly more power for high-intensity work. Both use pure copper motors for reliable metal drilling, but the wattage difference supports the heavier duty applications of the 2-inch capacity model.
Is the iMeshbean 1400W model suitable for thick steel plates?
Yes, the iMeshbean 1400W 2-Inch Magnetic Drill Press is suitable for thick steel plates. It offers robust magnetic force and a large 2-inch capacity. It fits users drilling thick steel who prioritize holding power. The higher wattage supports maintaining speed up to 810 RPM during these demanding tasks.