Best Drill Presses with 7.5 a in 2026: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best drill presses with 7 5 a ensures you get reliable torque for shop tasks without overwhelming a standard 120V outlet. This buying guide compares 15 models strictly using the specifications published on their listings.
The PioneerWorks 13-Inch Floor Drill Press earns the top position because its broad speed range of 288 to 3,084 RPM and 3.2-inch stroke provide balanced utility for wood and metal work. Use this guide to compare swing sizes, spindle travel, and overall dimensions to choose the right 7.5-amp machine for your workshop.
Quick picks
The best fit for you
- You need balanced drilling speeds for mixed workshop tasks PioneerWorks 13-Inch Floor Drill Press It pairs a 7.5-amp motor with a 288 to 3,084 RPM variable range and a 3.2-inch stroke.
- You want the lightest 13-inch drill press listed KOKEBREN 13-Inch Variable Speed Drill Press At 36.5 pounds, it delivers full 7.5-amp power and 3.2 inches of travel in a lighter frame.
- You work with wider stock needing extra clearance Garvee 15-Inch Floor Drill Press Its larger 15-inch swing provides extra throat capacity for wide wood and metal workpieces.
- You prefer a heavier frame for workshop stability GarveeTech 13-Inch 7.5A Floor Drill Press Weighing 117 pounds, this 7.5-amp unit provides substantial mass alongside a 3.2-inch stroke.
Our 15 picks
PioneerWorks 13-Inch Floor Drill Press
Best for: balanced wood and metal drilling tasks
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 Amp
- Spindle Speed
- 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 13"
- Spindle Travel
- 3.2"
The PioneerWorks 13-Inch 7.5A Drill Press gives you a 120-volt, 7.5-amp induction motor paired with a 13-inch swing for handling wider boards and metal stock. You get a 5/8-inch chuck capacity, 3.2 inches of spindle travel, and a 10 by 10-inch table that tilts from 0 to 45 degrees. Its 288 to 3,084 RPM operating range covers slow drilling in tough metals up to high-speed drilling in softer woods.
Pros
- Wide speed range spanning 288 to 3,084 RPM across 12 settings
- Generous 3.2-inch spindle travel for deep drilling passes
- Standard 5/8-inch chuck capacity accepts larger drill bit shanks
- Work table tilts from 0 to 45 degrees for angled holes
Cons
- Table surface measures 10 by 10 inches, which is compact for large panels
- 13-inch swing restricts center-drilling capacity compared to 15-inch models
Good fit if
- You need a broad 288 to 3,084 RPM range to bore through both metal and timber.
- You require at least 3.2 inches of plunge depth in a single stroke.
- You frequently drill angled holes using a tilting table bevel.
Skip if
- You need a 15-inch swing to reach the center of wider workpieces.
- You require a work table larger than 10 by 10 inches without adding external support.
Verdict: PioneerWorks 13-Inch 7.5A Drill Press delivers a broad 288 to 3,084 RPM range and a 3.2-inch stroke, making it a well-rounded 7.5-amp machine for diverse metal and wood projects.
EliteEdge 13-Inch 7.5A Variable Speed Drill Press
Best for: general workshop drilling in wood and metal
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 A
- Spindle Speed
- 12-speed, 288–3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
View on Amazon: EliteEdge 13-Inch 7.5A Variable Speed Drill Press
The EliteEdge 13-Inch 7.5A Floor Drill Press combines a 7.5-amp induction motor with a 13-inch swing for drilling wood and metal. You get a 5/8-inch chuck capacity, 3.2 inches of spindle travel, and a speed range spanning 288 to 3084 RPM across 12 settings. Its 10-by-10-inch work table tilts up to 45 degrees, making it a capable baseline machine for general DIY drilling operations.
Pros
- 7.5-amp induction motor runs on standard 120V power
- Broad speed range from 288 to 3084 RPM across 12 speeds
- 5/8-inch chuck capacity with 3.2 inches of spindle travel
- 10 x 10-inch work table tilts from 0 to 45 degrees
Cons
- Table working surface is limited to 10 by 10 inches
- Spindle travel is capped at 3.2 inches
- No integrated worklight or laser guide listed in specifications
Good fit if
- You need a 5/8-inch chuck capacity for drilling wood and metal stock.
- You want 12 distinct speed steps between 288 and 3084 RPM.
- You require an adjustable work table that bevels up to 45 degrees.
Skip if
- You need more than 3.2 inches of spindle travel for deep boreholes.
- You require a larger support surface than the 10-by-10-inch table.
Verdict: EliteEdge 13-Inch 7.5A Floor Drill Press delivers dependable 7.5-amp drilling power with a wide 288 to 3084 RPM range and a 5/8-inch chuck for general shop work.
KOKEBREN 13-Inch Variable Speed Drill Press
Best for: general metal and woodworking requiring broad speed control
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 288 to 3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 13 in (title), 15" (bullets)
- Spindle Travel
- 3.2"
This KOKEBREN drill press runs on a 7.5-amp, 120-volt induction motor suited for drilling through wood and metal. It features a wide speed range from 288 to 3084 RPM across 12 settings, along with a 3.2-inch spindle travel. The 10-by-10-inch worktable tilts from 0 to 45 degrees, making it a capable choice if you need variable speed flexibility and standard 5/8-inch chuck capacity for general shop tasks.
Pros
- 7.5A induction motor handles metal and wood drilling
- Broad speed range from 288 to 3084 RPM
- 3.2-inch spindle travel with 5/8-inch chuck capacity
- Worktable tilts 0 to 45 degrees for angled drilling
Cons
- Conflicting swing specifications listed between 13 inches and 15 inches
- Relatively compact 10-by-10-inch table surface
Good fit if
- You need a 7.5A drill press with speeds reaching down to 288 RPM for metal
- You require up to 3.2 inches of spindle travel on a tilting worktable
- You use bits that require a standard 5/8-inch chuck capacity
Skip if
- You require an unambiguous 15-inch throat clearance without conflicting specs
- You need a work surface larger than 10 by 10 inches for oversized workpieces
Verdict: KOKEBREN 13-Inch 7.5A Variable Speed Drill Press delivers solid drilling power, a flexible 288 to 3084 RPM range, and 3.2 inches of spindle travel for metal and wood projects.
Garvee 13-Inch Floor Drill Press
Best for: general workshop drilling in wood and metal
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
This 13-inch floor drill press from Garvee features a 7.5-amp, 120V pure copper motor designed for drilling through metal and wood. It delivers a 12-speed range spanning from 288 to 3084 RPM, a 3.2-inch spindle travel, and a 5/8-inch chuck capacity. The 10 by 10-inch tilting worktable and 3-inch column provide steady positioning. It suits you if you need versatile speed control and deep reach for workshop tasks.
Pros
- Wide speed range from 288 to 3084 RPM across 12 speeds
- 7.5-amp pure copper motor handles wood and metal drilling
- 5/8-inch chuck capacity with 3.2-inch spindle travel
- Tilting 10 by 10-inch worktable for angled work
Cons
- 3.2-inch spindle travel limits single-pass drilling depth
- 13-inch swing offers less throat clearance than 15-inch alternatives
Good fit if
- You need a broad speed range between 288 and 3084 RPM for mixed materials.
- You want a floor-standing machine with a 5/8-inch chuck capacity.
- You require a tilting 10 by 10-inch table for angled holes.
Skip if
- You need more than 3.2 inches of continuous spindle travel.
- You work with wide workpieces requiring greater throat depth than a 13-inch swing provides.
Verdict: Garvee 13-Inch 7.5A Floor Drill Press delivers a dependable 12-speed drive and 5/8-inch chuck capacity for mixed wood and metal projects. Its 7.5-amp copper motor and 3.2-inch stroke make it a balanced floor-standing drill press for everyday shop work.
Garvee 15-Inch Floor Drill Press
Best for: Large workpieces needing wide swing and deep plunge
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 15 in
- Spindle Travel
- 3.2"
This Garvee floor machine combines a 7.5 A pure copper 120V motor with a wide 15-inch swing. It gives you 3.2 inches of spindle travel and a 5/8-inch chuck capacity. The spindle operates across 12 speeds from 288 to 3084 RPM to handle both wood and metal. If you need larger workpiece clearance and extended travel beyond standard 13-inch models, this unit fits your shop setup.
Pros
- Wide 15-inch swing for handling wider workpieces
- Deep 3.2-inch spindle travel
- Broad 12-speed range from 288 to 3084 RPM
- Generous 5/8-inch chuck and drilling capacity
- Large 12 by 12-inch tilting work table
Cons
- Requires substantial floor space with a 57-inch length and 19.5 by 11.6-inch base
- No integrated work light or laser guide listed in specifications
Good fit if
- You work with wide boards or panels that require a 15-inch swing
- You need at least 3 inches of continuous spindle plunge depth
- You drill across varying materials requiring speeds down to 288 RPM
Skip if
- You need a compact benchtop tool that saves floor area
- You want built-in laser alignment markers or work lamps included
Verdict: Garvee 15-Inch Floor Drill Press delivers greater capacity than smaller 13-inch models thanks to its 15-inch swing, 3.2-inch travel, and 7.5 A motor. It provides heavy-duty drilling versatility for wider wood and metal workpieces.
Garvee 13-Inch Floor Drill Press
Best for: General workshop drilling in wood and metal
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
The Garvee 13-Inch 7.5A Floor Drill Press delivers power through a 120V induction motor rated at 7.5 amps. It provides a speed range of 288 to 3084 RPM across 12 speeds, allowing you to bore through wood and metal. With 3.2 inches of spindle travel, a 5/8-inch chuck, and a 10 by 10-inch tilting table, it gives you dependable capacity for medium-depth shop drilling projects.
Pros
- Wide speed range spanning 288 to 3084 RPM across 12 settings
- 7.5-amp induction motor designed for wood and metal drilling
- 5/8-inch chuck capacity handles larger bit shanks
- Work table tilts from 0 to 45 degrees for angled holes
Cons
- Work table surface is compact at 10 by 10 inches
- Spindle travel reaches 3.2 inches, limiting deep-hole operations
Good fit if
- You need a wide operating range from 288 to 3084 RPM for mixed materials.
- You work with drill bits featuring shanks up to 5/8 inch.
- You want a 13-inch swing paired with a rigid 3-inch column.
Skip if
- You need more than 3.2 inches of spindle stroke for deep boring tasks.
- You require a work table larger than 10 by 10 inches for broad panels.
Verdict: Garvee 13-Inch 7.5A Floor Drill Press offers a robust 7.5-amp motor and a 288 to 3084 RPM range suitable for multi-material workshops. It delivers steady utility if its 3.2-inch spindle stroke and 10-inch table match your project sizes.
Garvee 15-Inch Benchtop Drill Press
Best for: benchtop workshops needing a wide 15-inch swing
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 15 in
- Spindle Travel
- 3.2"
This benchtop machine gives you a 15-inch swing powered by a 7.5-amp, 120V pure copper motor. It features 12 speed settings spanning 288 to 3084 RPM, a 5/8-inch chuck capacity, and 3.2 inches of spindle travel. If you need wide-board drilling clearance on a workbench rather than dedicating floor space to a freestanding column, its 12 by 12-inch tilting table suits wood and metal projects well.
Pros
- Wide 15-inch swing allows drilling toward the center of larger boards
- Broad 288 to 3084 RPM speed range across 12 settings
- Equipped with a 5/8-inch chuck and 3.2-inch spindle travel
- Comes with a swing-away safety guard and hex wrenches
Cons
- Occupies a large bench footprint with its 19.5 by 11.6-inch base
- No built-in worklight or laser alignment listed in the specifications
Good fit if
- You want a 15-inch swing capacity in a benchtop format instead of a floor-standing unit
- You drill both wood and metal and need speeds down to 288 RPM
- You regularly use large drill bits requiring a 5/8-inch chuck
Skip if
- You need a dedicated floor-standing machine to save workbench surface
- You require more than 3.2 inches of spindle travel for deep boreholes
Verdict: Garvee 15-Inch Benchtop Drill Press combines a spacious 15-inch swing and a 7.5-amp pure copper motor into a benchtop layout. It delivers flexible drilling speeds from 288 to 3084 RPM without requiring floor space.
ExploreHorizon 13-Inch 7.5A Drill Press
Best for: General metal and wood drilling projects
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed (288-3084 RPM)
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
The ExploreHorizon 13-Inch Floor Drill Press runs on a 7.5-amp, 120-volt induction motor engineered for wood and metal drilling. It features a 13-inch swing, a 5/8-inch chuck capacity, and a spindle speed range spanning 288 to 3,084 RPM across 12 settings. With 3.2 inches of spindle travel and a 0-to-45-degree tilting work table, this machine provides the range and capacity you need for varied workshop drilling tasks.
Pros
- 12 spindle speeds spanning from 288 to 3,084 RPM
- Generous 5/8-inch chuck and drilling capacity
- 3.2 inches of spindle travel
- 10-by-10-inch cast iron table tilts 0 to 45 degrees
Cons
- Work surface is restricted to 10 by 10 inches
- Spindle stroke is limited to 3.2 inches for deep boring
Good fit if
- You need a broad speed range to handle both wood and hard metals.
- You require a 5/8-inch chuck to hold larger shank drill bits.
- You perform angled drilling operations requiring up to a 45-degree bevel.
Skip if
- You need a spacious work table larger than 10 by 10 inches.
- You require more than 3.2 inches of continuous spindle plunge depth.
Verdict: ExploreHorizon 13-Inch 7.5A Floor Drill Press provides a flexible 12-speed drive and a tilting table suited for mixed metal and woodworking duties. Its 5/8-inch chuck and 3-inch column diameter deliver solid workshop utility.
GarveeTech 13-Inch Floor Drill Press
Best for: general shop drilling in wood and metal
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 288-3084 RPM (12 speed)
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
This floor drill press runs on a 7.5A pure copper induction motor and delivers a speed range of 288 to 3084 RPM across 12 speeds. You get a 13-inch swing, a 5/8-inch chuck capacity, and 3.2 inches of spindle travel. At 62 inches tall and 117 pounds, it provides a stable footprint for drilling wood and metal in a dedicated home or small-shop workspace.
Pros
- Wide speed range from 288 to 3084 RPM across 12 speeds
- 7.5A pure copper induction motor for drilling wood and metal
- 5/8-inch chuck capacity with 3.2 inches of spindle travel
- Sturdy 117-pound build with a 3-inch column diameter
Cons
- Worktable surface is relatively compact at 10 by 10 inches
- Stands 62 inches tall and requires dedicated floor space
Good fit if
- You need a 13-inch floor model with a 5/8-inch chuck capacity.
- You work with materials requiring low drilling speeds down to 288 RPM.
- You have floor space for a 62-inch machine weighing 117 pounds.
Skip if
- You need a benchtop unit instead of a tall floor-standing machine.
- You handle large workpieces that require a table bigger than 10 by 10 inches.
Verdict: GarveeTech 13-Inch Floor Drill Press delivers dependable 7.5A power and a broad 288 to 3084 RPM range for diverse shop tasks. Its 3.2-inch spindle stroke and 5/8-inch chuck handle standard metalworking and woodworking projects with ease.
ExploreHorizon 13-Inch Variable Speed Drill Press
Best for: general-purpose wood and metal benchtop drilling
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 288-3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
View on Amazon: ExploreHorizon 13-Inch Variable Speed Drill Press
This ExploreHorizon drill press pairs a 7.5-amp 120-volt induction motor with a 13-inch swing and a 5/8-inch chuck capacity. Its variable speed system spans 288 to 3084 RPM, letting you adjust drill speeds across wood and metal workpieces. With 3.2 inches of spindle travel and a 10 by 10-inch tilting work table, it suits woodworkers and DIYers needing adaptable drilling capacity.
Pros
- Broad 288 to 3084 RPM variable speed range
- 7.5A induction motor provides ample power for wood and metal
- Standard 5/8-inch chuck and drilling capacity
- Work table tilts from 0 to 45 degrees for angled holes
Cons
- Work table surface is relatively compact at 10 by 10 inches
- No integrated laser guide or worklight listed in specifications
Good fit if
- You need a 13-inch swing and up to 3.2 inches of spindle travel.
- You drill both metals and woods requiring a wide RPM range down to 288 RPM.
- You use bits with shanks up to 5/8 inch.
Skip if
- You need a larger work table without adding an aftermarket auxiliary top.
- You require built-in laser alignment or task lighting out of the box.
Verdict: ExploreHorizon 13-Inch 7.5A Variable Speed Drill Press delivers flexible speed control from 288 to 3084 RPM alongside a solid 3.2-inch spindle stroke. It offers capable 7.5-amp power for workshops handling varied wood and metal jobs.
ExploreHorizon 13-Inch Variable Speed Drill Press
Best for: general shop drilling with variable speed requirements
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed (288-3084 RPM)
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
View on Amazon: ExploreHorizon 13-Inch Variable Speed Drill Press
This ExploreHorizon drill press pairs a 7.5-amp induction motor with a 13-inch swing for drilling into wood and metal. You get a broad operating range between 288 and 3084 RPM across 12 speed settings, paired with a 5/8-inch chuck capacity. It provides 3.2 inches of spindle travel on a 10 by 10-inch tilting table, suiting workshops that need solid drilling capacity in a compact configuration.
Pros
- 7.5A induction motor handles wood and metal drilling
- Broad 12-speed range from 288 to 3084 RPM
- Generous 3.2-inch spindle travel depth
- Includes 5/8-inch chuck capacity for larger bits
Cons
- Table bevel is limited to 0 to 45 degrees
- Spindle travel tops out at 3.2 inches for deeper borings
- Weighs 45.9 pounds which may limit heavy industrial use
Good fit if
- You need a 13-inch swing paired with a standard 120V 7.5-amp motor.
- You drill varied materials requiring a low 288 RPM to a high 3084 RPM range.
- You use bits that require up to a 5/8-inch chuck capacity.
Skip if
- You require spindle travel deeper than 3.2 inches in a single stroke.
- You need a machine with a swing capacity greater than 13 inches.
- You need a work table that tilts past 45 degrees.
Verdict: ExploreHorizon 13-Inch 7.5A Drill Press delivers reliable variable speeds and a 5/8-inch chuck for standard metalworking and woodworking tasks. It offers balanced torque and utility across its 12 speed settings.
GarveeTech 13-Inch 7.5A Floor Drill Press
Best for: metal and wood fabrication needing deep stroke
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
This GarveeTech machine is a 13-inch drill press driven by a 7.5A, 120V motor. It delivers an operating speed range of 288 to 3084 RPM across 12 speeds to handle drilling through wood and metal. With a 5/8-inch chuck capacity, a 3.2-inch spindle travel, and a 10-by-10-inch tilting work table, it suits your workshop if you need solid drilling depth and wide speed adjustment for general fabrication.
Pros
- Wide speed range spanning 288 to 3084 RPM
- 3.2-inch spindle travel for deep drilling
- 5/8-inch chuck capacity accepts larger bits
- 10-by-10-inch tilting work table
Cons
- Weighs 117 pounds, making relocation difficult
- Table working surface is limited to 10 by 10 inches
Good fit if
- You need to drill up to 3.2 inches deep in wood or metal.
- You work with bit shanks up to 5/8 inch in diameter.
- You want a wide 288 to 3084 RPM speed range for varied tasks.
Skip if
- You need a larger working surface than the 10-by-10-inch table.
- You require a portable machine that weighs under 100 pounds.
Verdict: GarveeTech 13-Inch 7.5A Drill Press offers versatile drilling speeds and a 3.2-inch stroke for mixed metal and woodworking tasks. Its 5/8-inch chuck and 117-pound frame provide a steady setup for demanding workshop drilling.
OEMTOOLS 15-Inch Floor Drill Press
Best for: Large workpieces requiring wide speed ranges
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5 Amp
- Spindle Speed
- 16 speeds, 220 to 3600 RPM
- Swing
- 15"
- Spindle Travel
- 3-1/8"
- Chuck Capacity
- 7/64"-5/8"
This floor-standing machine runs on a 120V, 7.5-amp motor and delivers 16 operating speeds from 220 to 3600 RPM. You get a 15-inch swing, 3-1/8 inches of spindle travel, and a chuck capacity spanning 7/64 inch to 5/8 inch. It suits you if you need wide speed flexibility and ample clearance for tall or bulky workpieces on a dedicated floor unit.
Pros
- Wide 16-speed range spanning 220 to 3600 RPM
- Large 15-inch swing with 47-inch spindle-to-base clearance
- Chuck accommodates bit shanks from 7/64 inch up to 5/8 inch
- Cast iron table tilts 45 degrees left or right and rotates 360 degrees
Cons
- Standing height of 56.3 inches requires dedicated floor space
- Spindle travel is limited to 3-1/8 inches
Good fit if
- You need low speeds down to 220 RPM or high speeds up to 3600 RPM across 16 settings
- You work with large materials requiring up to 47 inches of spindle-to-base clearance
- You use large drill accessories requiring a 5/8-inch chuck capacity
Skip if
- You need a compact benchtop machine rather than a 56.3-inch tall floor unit
- You require more than 3-1/8 inches of continuous plunge depth in a single stroke
Verdict: OEMTOOLS 15-Inch Floor Drill Press offers broad material versatility through its 16-speed setup and substantial vertical clearances.
EliteEdge 13-Inch 7.5A Drill Press
Best for: General workshop drilling across wood and metal
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed (288-3084 RPM)
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
This 13-inch drill press features a 7.5-amp 120V pure copper motor designed for wood and metal fabrication. It gives you a speed range of 288 to 3084 RPM across 12 settings, along with 3.2 inches of spindle travel and a 5/8-inch chuck capacity. If you need a capable 7.5-amp unit with a tilting 10 by 10-inch worktable and included hex maintenance wrenches, this machine handles daily shop drilling tasks.
Pros
- 7.5-amp 120V pure copper induction motor
- Wide speed range from 288 to 3084 RPM across 12 settings
- 3.2 inches of spindle travel with a 5/8-inch chuck capacity
- Comes with a swing-away safety guard and tilting table
Cons
- 10 by 10-inch table provides limited support for wide workpieces
- Maximum drilling depth is limited to 3.2 inches
Good fit if
- You need a 7.5-amp motor that operates on a standard 120V circuit.
- You work with mixed materials requiring speeds between 288 and 3084 RPM.
- You require up to 3.2 inches of plunge depth for your hole drilling.
Skip if
- You regularly drill workpieces that require more than 3.2 inches of spindle travel.
- You need a work surface larger than the included 10 by 10-inch table.
Verdict: EliteEdge 13-Inch Floor Drill Press provides reliable 7.5-amp power with a versatile 12-speed drive reaching up to 3084 RPM. It is a dependable choice for general-purpose wood and metal drilling projects.
KOKEBREN 13-Inch 7.5A Floor Drill Press
Best for: general metal and woodworking requiring deep spindle travel
- Amperage
- 7.5 A (what this guide is about)
- Motor Power
- 7.5A
- Spindle Speed
- 288-3084 RPM (12 speed)
- Hole Capacity
- 5/8"
- Swing
- 15"
- Spindle Travel
- 3.2"
The KOKEBREN 13-Inch Floor Drill Press runs on a 7.5-amp pure copper induction motor and delivers 12 speeds ranging from 288 to 3084 RPM. It offers a 5/8-inch chuck capacity alongside a 3.2-inch spindle travel. Standing 63 inches tall with an 18 by 11-inch base and a tilting table, it gives you the capacity and power needed to drill through both wood and metal projects in your workshop.
Pros
- 7.5-amp pure copper induction motor operating on 120V
- Broad speed range from 288 to 3084 RPM across 12 speeds
- Generous 3.2-inch spindle travel with a 5/8-inch chuck
- Equipped with a tilting table and a cast iron bench
Cons
- Overall height of 63 inches requires dedicated vertical floor space
- No built-in worklight or laser alignment listed in the specifications
Good fit if
- You need a 7.5-amp floor machine capable of drilling thick stock with 3.2 inches of travel.
- You work with mixed materials that require speeds as low as 288 RPM or up to 3084 RPM.
- You need a standard 5/8-inch chuck capacity for larger drill bits.
Skip if
- You lack the floor space for a 63-inch-tall stationary machine.
- You require factory-integrated laser guides or task lights.
Verdict: KOKEBREN 13-Inch Floor Drill Press delivers dependable 7.5-amp power and a wide 12-speed range for diverse metal and woodworking jobs. Its 3.2-inch stroke and 5/8-inch chuck make it a solid choice for general workshop fabrication.
Specifications side by side
| Spec | PioneerWorks 13-Inch Floor Drill Press | EliteEdge 13-Inch 7.5A Variable Speed Drill Press | KOKEBREN 13-Inch Variable Speed Drill Press | Garvee 13-Inch Floor Drill Press | Garvee 15-Inch Floor Drill Press | Garvee 13-Inch Floor Drill Press | Garvee 15-Inch Benchtop Drill Press | ExploreHorizon 13-Inch 7.5A Drill Press | GarveeTech 13-Inch Floor Drill Press | ExploreHorizon 13-Inch Variable Speed Drill Press | ExploreHorizon 13-Inch Variable Speed Drill Press | GarveeTech 13-Inch 7.5A Floor Drill Press | OEMTOOLS 15-Inch Floor Drill Press | EliteEdge 13-Inch 7.5A Drill Press | KOKEBREN 13-Inch 7.5A Floor Drill Press |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Power | 7.5 Amp | 7.5 A | 7.5A | 7.5 Amp | 7.5 Amp | 7.5A | 7.5 Amp | 7.5A | 7.5A | 7.5A | 7.5A | 7.5A | 7.5 Amp | 7.5A | 7.5A |
| Spindle Speed | 288-3084 RPM | 12-speed, 288–3084 RPM | 288 to 3084 RPM | 12-speed, 288-3084 RPM | 12-speed, 288-3084 RPM | 12-speed, 288-3084 RPM | 12-speed, 288-3084 RPM | 12-speed (288-3084 RPM) | 288-3084 RPM (12 speed) | 288-3084 RPM | 12-speed (288-3084 RPM) | 12-speed, 288-3084 RPM | 16 speeds, 220 to 3600 RPM | 12-speed (288-3084 RPM) | 288-3084 RPM (12 speed) |
| Hole Capacity | 5/8" | 5/8 in | 5/8" | 5/8" | 5/8" | 5/8 in | 5/8" | 5/8 in | 5/8" | 5/8 in | 5/8 in | 5/8 in | not specified | 5/8 in | 5/8" |
| Swing | 13" | 13 in | 13 in (title), 15" (bullets) | 13 in | 15 in | 13 in | 15 in | 13 in | 13 in | 13 in | 13 in | 13 in | 15" | 13 in | 15" |
| Spindle Travel | 3.2" | 3.2 in | 3.2" | 3.2" | 3.2" | 3.2 in | 3.2" | 3.2 in | 3.2" | 3.2 in | 3.2 in | 3.2 in | 3-1/8" | 3.2 in | 3.2" |
| Chuck Capacity | 5/8" | 5/8 in | 5/8" | 5/8" | 5/8" | 5/8 in | 5/8" | 5/8 in | 5/8" | 5/8 in | 5/8 in | 5/8 in | 7/64"-5/8" | 5/8 in | 5/8" |
| Voltage | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V | 120V |
| Configuration | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | not specified | Benchtop | Benchtop |
| Speed Settings | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed |
| Amperage | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A | 7.5 A |
| Features | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | Tilting Table | not specified | Tilting Table | Tilting Table |
| Target Material | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Wood | not specified | Metal, Wood | Metal, Wood |
| Dimensions | 55.5 × 19.9 × 10.6 inches | 55 × 20 × 10 inches | 55.5 × 19.9 × 10.6 inches | 57 × 20.5 × 10 inches | 57 × 20.5 × 10 inches | 57 × 20.5 × 10 inches | 57 × 20.5 × 10 inches | 55 × 20 × 10 inches | 24 × 12 × 62 inches | 13.4 × 6.1 × 16.3 inches | 25 × 25 × 15 inches | 55.5 × 20.1 × 10.6 inches | 10.1 × 20.1 × 56.3 inches | 25 × 25 × 15 inches | 24 × 12 × 63 inches |
| Weight | not specified | 47.1 pounds | 36.5 pounds | not specified | not specified | not specified | not specified | 45.9 pounds | 117 pounds | 45.9 pounds | 45.9 pounds | 117 pounds | not specified | 47.1 pounds | 36.5 pounds |
| Size | 13 inch Floor Drill Press + Standard Motor | 1550W 500RPM Single track 1Pcs | 24 in | 13 in Floor Copper Motor Drill Press | 15 in Copper Motor Floor Drill Press | 13 in Floor Drill Press | not specified | not specified | not specified | 1300W 700RPM Double track 2Pcs | not specified | not specified | One Size | 1550W 500RPM Single track 1Pcs | 24 in |
| Model | 01 | 13 in Floor Drill Press | XeIh57WQ-Cd0vUH1gKCDhAGjpNd3 | 01 | 01 | 01 | 01 | 1c1Q7_2FN2AxrMxs1W8boQuQ17 | RKLJO0kfauSc-EOxFePnaQSewNQ3A | 1c1Q7_2FN2AxrMxs1W8boQuQ17 | 1c1Q7_2FN2AxrMxs1W8boQuQ17 | RKLJO0kfauSc-EOxFePnaQSewNQ3A | 24992 | 13 in Floor Drill Press | XeIh57WQ-Cd0vUH1gKCDhAGjpNd3 |
| Color | not specified | not specified | Black | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Black | Green | not specified | Black |
Is a 7.5 A motor worth it?
A 7.5-amp motor supplies steady rotational power for driving bits through both metal and wood on a standard 120V circuit. Across these machines, that electrical draw pairs with 5/8-inch chuck capacities and multi-speed or variable drives that reach between 288 and 3,084 RPM. In daily shop use, this amperage rating supports sustained drilling without stalling under regular resistance. It delivers sufficient mechanical force for deep 3.2-inch plunge strokes while keeping current requirements within typical home workshop electrical limits.
Worth it if
- You regularly drill through both wood and metal stock using bits up to 5/8-inch shank sizes.
- You run your tools on common 120V household branch circuits.
Skip it if
- You only drill thin, soft materials that require minimal motor amperage.
- You already have dedicated high-amp industrial circuits suited for heavier production machinery.
How We Selected These Models
To compile this guide, we identified drill presses that list a 7.5 A motor in their published specifications or titles. We do not physically handle or test the machines. Instead, we compare documented details such as swing size, spindle travel, and speed options. Only one variant from each product family is featured.
The models are ordered with products in stock first, then by Amazon sales rank, placing better-selling products first. All technical details come directly from published product data. Live availability and listing details update automatically throughout the day, ensuring you see verified specifications for your workshop setup.
How to Choose the Right 7.5A Drill Press
-
Match Speed to Material
Check the operating speed range to ensure it matches the bits and materials you plan to drill. Harder metals require slow rotation to avoid overheating the bit, while small-diameter wood bits require fast speeds for clean holes. Many 7.5-amp machines, such as the PioneerWorks 13-Inch Floor Drill Press, provide a wide 288 to 3,084 RPM span. If your work shifts between dense steel and soft pine, look for this broad spread so you can dial in the correct cutting rate.
-
Evaluate Spindle Stroke Depth
Spindle stroke measures how deep the quill plunges in a single pull of the feed handle. A standard 3.2-inch stroke suits common joinery, mortising, and metal fabrication without requiring you to raise the work table mid-drilling. If you frequently bore through thick dimensional lumber or heavy metal tubing, verify this measurement on the spec sheet. Choosing a machine with sufficient plunge depth prevents stalled drilling cycles and keeps holes aligned when boring all the way through deep stock.
-
Check Chuck Diameter Capacity
Review the chuck size before selecting a model to make sure it accepts your largest drill accessories. Most 7.5-amp drill presses include a 5/8-inch chuck, which handles wider shank bits, hole saws, and heavy-duty twist drills that standard 1/2-inch chucks cannot grip. If you routinely bore large holes using specialized metalworking or timber-framing tooling, confirm the 5/8-inch rating. This specification guarantees compatibility with larger industrial drill accessories without needing separate adapter sleeves or reduced-shank bit sets.
-
Select Floor or Benchtop
Look at the overall height and frame layout to determine whether a floor-standing or benchtop machine fits your workspace. Floor-standing designs reach over 55 inches tall and clear valuable workbench space by standing independently on the shop floor. Benchtop configurations, like the Garvee 15-Inch Benchtop Drill Press, provide identical 7.5-amp motor output and wide swing while resting on an existing stand or counter. Measure your vertical overhead clearance and floor space before deciding which frame style suits your room.
-
Review Machine Overall Weight
Compare listed weights to balance assembly convenience against operational stability. Lightweight frames near 36 to 47 pounds are easier to shift, lift onto work surfaces, and transport if you work in a modular or shared space. Heavier models, such as the 117-pound GarveeTech 13-Inch Floor Drill Press, provide greater mass that helps dampen motor vibration during aggressive boring. If you leave the press permanently bolted down for heavy metalwork, higher mass ensures a more rigid, planted drilling platform.
-
Inspect Table Tilting Capabilities
Check the work table features if your fabrication projects involve angled holes or beveling. A tilting table allows you to pivot the workpiece support securely, eliminating the need to build custom wooden holding jigs for angled drilling tasks. Verify that the machine specifications list a tilting table alongside locking mechanisms for repeatable alignment. If you build angled cabinetry parts, furniture legs, or metal brackets, a built-in beveling table ensures accurate, secure hole placement directly against the metal surface.
Frequently asked questions
What materials can you drill with a 7.5A drill press?
A 7.5A drill press handles both wood and metal projects. Models such as the PioneerWorks 13-inch and EliteEdge 13-inch specify wood and metal as target materials. The 7.5-amp motor supplies steady rotational power across wide speed ranges, allowing you to run larger bits through softwoods or run specialized metal-drilling bits at slower speeds without stalling the machine.
What drill chuck size do 7.5-amp drill presses use?
Most 7.5-amp drill presses in this guide come equipped with a 5/8-inch chuck. Units such as the EliteEdge 13-inch, Garvee 13-inch, and GarveeTech 13-inch feature this capacity. A 5/8-inch chuck accommodates larger-diameter drill bit shanks than standard 1/2-inch chucks, giving you the ability to mount heavy-duty twist bits, Forstner bits, and hole saws for shop fabrication.
What spindle travel can you expect from a 7.5A drill press?
Most 7.5-amp drill presses provide a 3.2-inch spindle stroke. Machines like the PioneerWorks 13-inch, KOKEBREN 13-inch, and GarveeTech 13-inch all publish a 3.2-inch travel distance. This specification defines how deep your bit can plunge into a workpiece in a single pull of the feed handle, making it practical for boring through thick lumber or drilling structural metal tubing.
How much do these 7.5A drill presses weigh?
Weight varies substantially depending on the build and base design. Compact options like the KOKEBREN 13-inch weigh as little as 36.5 pounds, while EliteEdge and ExploreHorizon models weigh around 45.9 to 47.1 pounds. In contrast, heavy-duty floor-standing units such as the GarveeTech 13-inch weigh up to 117 pounds. Heavier machines provide extra dampening against vibration during demanding metal fabrication tasks.
What operating speeds are available on 7.5-amp drill presses?
Many 7.5-amp drill presses feature variable speed or multi-step belt drives operating between 288 RPM and 3,084 RPM. Models from Garvee and ExploreHorizon offer 12 speed steps, while the OEMTOOLS 15-inch model provides a 16-speed setup. A low end around 288 RPM suits hard metals and large bits, while the top speeds near 3,084 RPM cleanly cut through softer woods.
Can you plug a 7.5A drill press into a standard household outlet?
Yes, every 7.5A model in this guide runs on standard 120V power. Because standard North American household and workshop outlets are typically rated for 15 or 20 amps, a 7.5-amp draw operates comfortably well below breaker thresholds. You do not need specialized 240V wiring to operate any of these machines, making them accessible for home garages and standard workshop circuits.
Why is a tilting table useful on a drill press?
A tilting table lets you drill angled holes accurately without using specialized angled jigs or wedges. Models across the guide, including the PioneerWorks, EliteEdge, and GarveeTech units, list tilting tables among their primary features. Tilting the work surface allows you to clamp workpieces flat against the table while angling the entry point of the drill bit for repetitive, precise angled joinery or hardware mounting.