KOKEBREN 13-Inch 7.5A Floor Drill Review: Specs, Pros and Cons

What stands out

• 7.5A pure copper motor provides strong torque for tough materials.
• Variable speed control from 288 to 3084 RPM covers most drilling needs.
• 13-inch swing offers ample workspace for larger projects.
• Tilting table allows for precise angled drilling operations.

Who it fits

Key specs explained for this unit

Motor Power: 7.5A

This amperage rating indicates the electrical draw of the induction motor. A 7.5A motor provides substantial torque for drilling through dense materials like hardwood and mild steel. You benefit from consistent power without stalling under heavy loads. When shopping, compare this to smaller 5A or 6A models to ensure you have enough strength for your specific project requirements.

Spindle Speed: 288-3084 RPM

The variable speed control allows you to adjust rotation from 288 to 3084 RPM across twelve settings. Lower speeds suit metal drilling to prevent bit overheating, while higher speeds work efficiently for wood. This range gives you flexibility for various materials. Compare this span to fixed-speed models to see if the adjustability meets your diverse workshop needs.

Hole Capacity: 5/8"

This specification defines the maximum diameter of a hole the drill press can create in steel. A 5/8-inch capacity is standard for benchtop units, allowing you to drill through most structural metals. It limits your ability to bore large-diameter holes in heavy plate. Compare this limit with larger floor models if you frequently work with thick metal stock or require wider clearance.

Swing: 15"

The swing represents the distance from the spindle center to the column, determining the maximum width of workpiece you can drill. A 15-inch swing allows you to drill near the edge of larger boards or sheets. This is slightly wider than the 13-inch title might suggest. Compare this reach with smaller units to ensure your largest projects fit comfortably under the spindle.

Design and Build Analysis

According to the listing, this KOKEBREN drill press features a cast iron benchtop construction. The base measures 18 by 11 inches, providing a stable footprint for your workspace. The overall unit stands 63 inches tall with a column diameter of 3 inches. This height allows for taller workpieces, while the 3-inch column ensures rigidity during operation. The table size is 10 by 10 inches, offering ample surface area for securing materials. You can adjust the table angle, as tilting is listed as a feature.

The machine weighs 36.5 pounds. This mass helps dampen vibration, which contributes to the precise drilling performance mentioned in the specs. The swing is listed as 15 inches, though the title references 13 inches. This dimension determines the distance from the spindle to the column, limiting the width of material you can center-drill. The color is black, a standard finish for industrial tools that resists minor scuffs.

Controls include a variable speed dial, allowing you to adjust RPMs from 288 to 3084. This range covers most wood and metal applications. The unit operates on 120V power, fitting standard household outlets. The layout places the motor and head on a vertical column, typical for benchtop models. This design keeps the floor clear while providing the leverage needed for heavy-duty drilling tasks.

Setup And Daily Use Guide

Setting up this KOKEBREN drill press involves unpacking a unit that weighs 36.5 pounds. The base measures 18 by 11 inches, giving you a stable footprint on your workbench or floor. The overall height is 63 inches, which provides ample clearance for taller workpieces. You will need to secure the column to the base using the provided hardware. The package includes M3, M4, and M5 hex wrenches, along with a key drift and manual, simplifying the initial assembly process.

For daily operation, the variable speed control allows you to adjust the spindle speed from 288 to 3084 RPM. This range covers most drilling needs for wood and metal. You select the appropriate speed based on your material and bit size. The 7.5A pure copper motor ensures consistent power delivery, reducing the risk of stalling during demanding tasks. The 3.2-inch spindle travel accommodates deep drilling operations without frequent bit changes.

The 15-inch swing and 10 by 10-inch tilting table offer flexibility for various project sizes. You can position your workpiece securely under the chuck, which accepts bits up to 5/8 inch. The cast iron construction helps dissipate heat during extended use, supporting the motor’s longevity. You benefit from precise hole placement with minimal offset, thanks to the high locking strength of the quill assembly. This setup supports consistent, accurate results for both DIY projects and professional fabrication tasks.

Before You Buy This Drill Press

Before you commit to this KOKEBREN 13-inch floor drill press, verify your workspace dimensions. The unit stands 63 inches tall and weighs 36.5 pounds, requiring a sturdy surface or floor space. Check that your electrical outlets support the 120V requirement for the 7.5A motor. Consider the 15-inch swing; ensure you have enough clearance for larger workpieces without obstruction.

Maintenance is straightforward with the included hex wrenches for chuck adjustments. The cast iron base helps dampen vibration, but you should still inspect the belt tension periodically. The variable speed control from 288 to 3084 RPM suits both wood and metal, but verify your drill bit shanks fit the 5/8-inch chuck capacity. Compare this model against other benchtop options regarding table size and spindle travel. If you need a dedicated floor unit with pure copper motor durability, this fits that niche. Ensure your shop layout accommodates the 24-inch length and 12-inch width for safe operation.

Check before you buy

• Verify 120V outlet availability and circuit capacity for 7.5A draw
• Confirm 63-inch height fits your ceiling and workspace
• Check 5/8-inch chuck compatibility with your existing drill bits
• Ensure 15-inch swing clearance around the drill column

The product at a glance

1

KOKEBREN 13-Inch 7.5A Floor Drill Press

Best for: DIYers drilling wood and metal with variable speed needs

Motor Power

7.5A

Spindle Speed

288-3084 RPM (12 speed)

Hole Capacity

5/8"

Swing

15"

Spindle Travel

3.2"

Chuck Capacity

5/8"

View on Amazon: KOKEBREN 13-Inch 7.5A Floor Drill Press Affiliate link

This KOKEBREN floor drill press features a 7.5A pure copper motor and variable speed control ranging from 288 to 3084 RPM. It offers a 13-inch swing and a 5/8-inch chuck capacity for drilling wood and metal. The unit includes a tilting table and a 3.2-inch spindle travel. It suits DIYers needing a sturdy benchtop machine for various materials.

Pros

• 7.5A pure copper motor provides strong power for metal and wood
• Variable speed range from 288 to 3084 RPM adjusts to material needs
• 13-inch swing allows for larger workpieces
• Tilting table adds versatility for angled drilling

Cons

• 5/8-inch chuck capacity limits larger drill bit usage
• 36.5-pound weight may require secure mounting for stability
• 12 fixed speed settings rather than infinitely variable control

Good fit if

• You need a powerful motor for drilling through metal
• You want variable speed settings for different materials
• You require a tilting table for angled holes

Skip if

• You frequently drill holes larger than 5/8 inch
• You prefer a lightweight machine for easy portability
• You need a drill press with more than 12 speed options

Verdict: KOKEBREN 13-Inch Floor Drill Press fits users who need a robust, variable-speed machine for wood and metal projects. Its 7.5A motor and tilting table make it suitable for serious DIY work.

Specifications side by side

Frequently asked questions

See also

• kokebren 13 inch 7 5a floor drill alternatives
• kokebren 13 inch variable speed drill vs 13 inch 7 5a floor drill
• best 13-Inch floor polishers
• jjgj 13 inch tablet review