iMeshbean 1380W Low Profile Magnetic vs iMeshbean 1400W 1.6" Magnetic Drill: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This imeshbean 1380w low profile magnetic vs 1400w 1 6 magnetic drill comparison highlights two robust tools from the same brand. Both units feature pure copper motors, double-coil magnetic bases for safety, and weigh 28 pounds. The main difference lies in their design and power. The first model prioritizes a low profile for tight spaces, while the second offers higher horsepower and variable speed control for more demanding industrial tasks.
Key differences
| Aspect | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 1.6" Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Hole Capacity | 1.4 in (35 mm) | 1.6 in |
| Spindle Speed | 680 RPM | 810 RPM |
| Speed Settings | not listed | 10-speed variable |
| Dimensions | 11 x 3.9 x 8.3 in | 4.7 x 14.2 x 10.6 in |
| Magnetic Force | 2585 lbf (11500N) | 2922 lbf (13000N) |
Which one should you choose?
Choose iMeshbean 1380W Low Profile Magnetic Drill Press if
- You need to drill in tight, hard-to-reach areas with a compact footprint
- You prefer a simpler, fixed-speed tool for standard steel fabrication
- You want a lower profile design that fits under existing structures
Choose iMeshbean 1400W 1.6" Magnetic Drill Press if
- You require variable speed control for different materials and drill bits
- You need the largest hole capacity of 1.6 inches for heavy-duty work
- You want higher magnetic holding force and a more powerful motor
Verdict: Choose the 1380W model if your work involves confined spaces where its low profile and compact size are essential. Select the 1400W model if you need variable speed settings, greater hole capacity, and higher magnetic force for more rigorous industrial applications.
Specs Show Key Differences
Motor Wattage
The iMeshbean 1400W 1.6" Magnetic Drill Press offers slightly more power with a 1400W pure copper motor. This unit is designed for high-intensity work and harder materials. The iMeshbean 1380W Low Profile Magnetic Drill Press uses a 1380W pure copper motor. While lower in wattage, it still provides strong performance for general drilling tasks. The 20W difference is minor, but the 1400W model has the edge for sustained heavy loads.
Hole Capacity
Drilling large holes requires a machine with a bigger bore diameter. The iMeshbean 1400W 1.6" Magnetic Drill Press handles a maximum core drilling diameter of 1.6 inches. This allows for larger annular cutter usage. The iMeshbean 1380W Low Profile Magnetic Drill Press is limited to 1.4 inches (35 mm). If you need to drill wider holes in thick steel, the 1.6-inch capacity of the second model is essential. The 1380W model is sufficient for smaller diameter work.
Spindle Speed
Speed options affect how you approach different materials. The iMeshbean 1400W 1.6" Magnetic Drill Press features a variable speed control with ten settings, reaching up to 810 RPM. This allows you to adjust the speed for optimal cutting in various metals. The iMeshbean 1380W Low Profile Magnetic Drill Press runs at a fixed 680 RPM. Fixed speed is simpler but less versatile. The variable speed on the 1400W model gives you more control over the cutting process.
Magnetic Force
Holding power is critical for safety and accuracy. The iMeshbean 1400W 1.6" Magnetic Drill Press generates a magnetic attraction force of 2922 lbf (13000N). This strong hold ensures stability during heavy drilling. The iMeshbean 1380W Low Profile Magnetic Drill Press provides 2585 lbf (11500N). While still robust, it is less powerful than the 1400W unit. Both use double-coil designs for safety, but the higher force on the 1400W model offers better security on vertical surfaces.
Spindle Travel
Spindle travel determines how deep you can drill in a single pass. The iMeshbean 1380W Low Profile Magnetic Drill Press offers a spindle travel of 1.8 inches (45 mm). This is useful for deeper holes without repositioning. The iMeshbean 1400W 1.6" Magnetic Drill Press does not list a specific spindle travel distance in its published specifications. Without this data, we cannot compare their maximum depth capability directly. However, the 1380W model explicitly states its travel range for deeper tasks.
Which iMeshbean Magnetic Drill Fits You
Tight space and portability needs
You need a compact tool for confined areas. This low profile model measures 3.9 inches wide and 8.3 inches high. It weighs 28 pounds and features a detachable design for easy storage. The smaller footprint allows you to access hard-to-reach spots that bulkier machines cannot fit into.
Larger diameter drilling requirements
You require a larger hole capacity for heavy-duty tasks. This unit drills holes up to 1.6 inches in diameter. It also provides a higher spindle speed of 810 RPM and offers ten adjustable speed settings. The variable speed control lets you match the rotation to your specific material and cutter size.
Maximum magnetic holding force
You need the strongest possible attachment for safety on vertical surfaces. This drill generates 2922 lbf of magnetic force, which is higher than the competitor. The double-coil base with pure iron construction ensures secure footing. This extra holding power provides peace of mind when drilling through thick steel plates.
The products compared
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: tight spaces and vertical metal drilling
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill press features a 1380W motor and a 1.4-inch hole capacity. It delivers 680 RPM spindle speed and 2585 lbf magnetic force. The low profile design fits tight spaces. You get a 3/4-inch chuck capacity and 1.8-inch spindle travel. It suits industrial and construction tasks on metal surfaces.
Pros
- 1380W pure copper motor provides reliable power.
- 2585 lbf magnetic force secures the unit firmly.
- Low profile design accesses tight, hard-to-reach areas.
- 680 RPM speed handles large-diameter deep hole drilling.
Cons
- 1.4-inch hole capacity is smaller than the 1.6-inch alternative.
- 680 RPM is lower than the 810 RPM of competitors.
- 28-pound weight is substantial for portable use.
Good fit if
- You need to drill in confined spaces.
- You work with steel, stainless steel, or cast iron.
- You require strong magnetic security on vertical surfaces.
Skip if
- You need to drill holes larger than 1.4 inches.
- You prefer higher spindle speeds for faster cutting.
- You need a lighter tool for frequent transport.
Verdict: iMeshbean 1.4" Low Profile Magnetic Drill fits users who prioritize compact access over maximum speed or capacity. It is ideal for industrial and construction sites where space is limited.
iMeshbean 1400W 1.6" Magnetic Drill Press
Best for: Heavy-duty structural steel drilling
- Motor Power
- 1400W
- Spindle Speed
- 10-speed, 810 RPM
- Hole Capacity
- 1.6 in
- Magnetic Force
- 2922lbf/13000N
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
View on Amazon: iMeshbean 1400W 1.6" Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill features a 1400W motor and a 1.6-inch hole capacity. It generates 2922 lbf of magnetic force for secure attachment. The unit offers variable speed control and reversible operation. Its dual dovetail guide rails allow for smooth motor height adjustments. This machine suits users drilling into steel structures or heavy metal plates.
Pros
- 1400W copper motor for high-intensity drilling
- 2922 lbf magnetic force for stability
- 1.6-inch maximum hole capacity
- Variable speed with 10 settings
Cons
- Heavier at 28 pounds
- Single speed of 810 RPM
- No mention of digital display
Good fit if
- You need strong magnetic holding power
- You drill holes up to 1.6 inches
- You work on vertical steel surfaces
Skip if
- You require a lighter portable unit
- You need variable spindle speeds
- You prefer a low-profile design
Verdict: The iMeshbean 1400W Magnetic Drill delivers high torque and strong magnetic hold for heavy metal work. It fits professionals drilling large holes in structural steel who prioritize power over portability.
Specifications side by side
| Spec | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 1.6" Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Spindle Speed | 680 RPM | 10-speed, 810 RPM |
| Hole Capacity | 1.4 in (35 mm) | 1.6 in |
| Spindle Travel | 1.8 in (45 mm) | not stated |
| Magnetic Force | 2585 lbf (11500N) | 2922lbf/13000N |
| Chuck Capacity | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic |
| Speed Settings | not stated | Variable Speed |
| Target Material | Metal | Metal |
| Design | Low Profile | not stated |
| Cutting Width | not stated | 6-Inch |
| Dimensions | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 28 pounds | 28 pounds |
| Color | multi | multi |
| Model | WF23824 | WF22518 |
Frequently asked questions
Which iMeshbean magnetic drill is best for tight spaces?
The iMeshbean 1380W Low Profile Magnetic Drill Press is the better choice for confined areas. Its compact design measures only 3.9 inches wide and 8.3 inches high. This low-profile build allows you to access vertical metal drilling spots that larger units cannot reach. It is ideal for industrial sites with limited room.
Does the 1400W model have variable speed settings?
Yes, the iMeshbean 1400W 1.6" Magnetic Drill Press includes variable speed settings. This feature lets you adjust the rotation rate to match the material and hole size. It provides precise control for heavy-duty structural steel drilling, ensuring clean cuts without damaging the workpiece or the drill bit.
What is the maximum drilling capacity of the 1400W model?
The iMeshbean 1400W Magnetic Drill Press supports a cutting width of 6 inches. This capacity allows you to drill large holes in thick structural steel. The high torque motor ensures consistent performance even when pushing through dense metal materials that require more power and stability.
How do the weights of these two drills compare?
Both the 1380W Low Profile and the 1400W models weigh exactly 28 pounds. This identical weight means portability is similar for both units. You will need to carry the same load regardless of which configuration you choose, so handle them with care during transport on job sites.
Which drill is better for heavy structural steel work?
The iMeshbean 1400W 1.6" Magnetic Drill Press is better for heavy structural steel. It delivers higher torque and strong magnetic hold to handle demanding metal work. The 1400W pure copper motor provides the power needed for large holes, making it a top choice for professionals who prioritize strength over compactness.
What are the dimensions of the low profile model?
The iMeshbean 1380W Low Profile Magnetic Drill Press measures 11 inches in length, 3.9 inches in width, and 8.3 inches in height. These compact dimensions make it easy to maneuver in tight spaces. The small footprint allows you to position the tool precisely on vertical surfaces without obstruction.
Are both drills designed for metal drilling?
Yes, both the 1380W and 1400W iMeshbean drills are designed specifically for metal. They feature magnetic configurations that secure the unit to ferrous surfaces. This design ensures stability and safety while you drill through various types of metal, from thin sheets to thick structural beams.