iMeshbean 1380W Low Profile Magnetic vs iMeshbean 1400W 1.6-Inch 10-Speed Mag (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This imeshbean 1380w low profile magnetic vs 1400w 1 6 inch 10 speed mag comparison highlights two distinct magnetic drill press options. Both units feature pure copper motors and dual-coil magnetic bases for secure attachment to metal surfaces. The primary difference lies in their design philosophy and capabilities. One model prioritizes a compact, low-profile form factor for tight spaces, while the other offers variable speed control and a larger drilling capacity for more demanding industrial tasks.
Key differences
| Aspect | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Hole Capacity | 1.4 in (35 mm) | 1.6 in |
| Spindle Speed | 680 RPM | 10-speed, up to 810 RPM |
| Magnetic Force | 2585 lbf (11500N) | 2922 lbf (13000N) |
| Spindle Travel | 1.8 in (45 mm) | not listed |
| Chuck Capacity | 3/4 in | not listed |
Which one should you choose?
Choose iMeshbean 1380W Low Profile Magnetic Drill Press if
- You need to drill in tight, hard-to-reach areas where space is limited.
- You require a lighter, more compact unit that is easier to transport and store.
- You are working with materials that do not require variable speed adjustments.
Choose iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill if
- You need to drill larger holes up to 1.6 inches in diameter.
- You require variable speed control to optimize performance for different materials.
- You need stronger magnetic holding power for vertical or overhead drilling.
Verdict: The 1380W Low Profile model is the better choice if your work involves confined spaces and you value portability and a simple, fixed-speed operation. The 1400W 1.6-Inch 10-Speed Mag Drill is more suitable for users who need greater drilling capacity, variable speed control, and higher magnetic holding force for heavy-duty industrial applications.
1380W Low Profile vs 1400W 10-Speed Mag
motor wattage
The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press edges ahead with a 1400W pure copper motor. The iMeshbean 1380W Low Profile Magnetic Drill Press uses a slightly less powerful 1380W pure copper motor. Both units rely on pure copper windings for efficiency and heat management. The 20W difference suggests the 1400W model may handle higher loads or sustained duty cycles with a bit more reserve power. For most standard magnetic drilling tasks, both motors provide ample torque, but the higher wattage offers a marginal advantage for demanding industrial applications.
hole capacity
Hole capacity is a critical spec for magnetic drills, and the iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press takes the lead here. It supports a maximum boring diameter of 1.6 inches. The iMeshbean 1380W Low Profile Magnetic Drill Press is limited to a 1.4-inch (35 mm) maximum core drilling diameter. This difference matters when you need to cut larger holes for pipes or bolts in thick steel. If your projects frequently require holes larger than 1.4 inches, the 1400W model is the necessary choice. For smaller holes, both machines perform adequately.
spindle speed
Speed control versatility favors the iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press. It features a 10-speed variable control system, allowing you to adjust the RPM precisely for different materials and cutter sizes. The iMeshbean 1380W Low Profile Magnetic Drill Press operates at a fixed 680 RPM. While 680 RPM is a solid speed for many tasks, the inability to adjust it limits optimization for specific annular cutters or softer metals. The variable speed on the 1400W model provides better adaptability for diverse drilling requirements.
magnetic force
Both machines offer strong holding power, but the iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press provides more. It generates 2922 lbf (13000N) of magnetic attraction force. The iMeshbean 1380W Low Profile Magnetic Drill Press delivers 2585 lbf (11500N). Both use dual-coil pure iron bases for safety and conductivity. The higher force on the 1400W model ensures stability during heavy cutting or when drilling at angles. However, the 1380W model’s force is still substantial and sufficient for most vertical drilling tasks on thick steel plates.
portability
The iMeshbean 1380W Low Profile Magnetic Drill Press is designed for tight spaces and portability. It weighs 28 pounds and measures 3.9 inches in width, 8.3 inches in height, and 11 inches in length. Its low profile allows access to confined areas. The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press also weighs 28 pounds but is significantly wider at 14.2 inches, though narrower in length at 4.7 inches. The 1380W model’s compact footprint makes it easier to carry and store, giving it the advantage for field work or small workshops.
Choose the right mag drill for your needs
Users needing access to tight spaces
The iMeshbean 1380W Low Profile Magnetic Drill Press measures only 3.9 inches wide and 8.3 inches high. Its compact dimensions allow it to fit into confined areas where larger drills cannot reach. The detachable design further enhances portability, making it easier to carry and store in small workspaces.
Professionals requiring variable speed control
The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press offers 10 adjustable speeds and a reversible function. This allows you to fine-tune the drilling rate for different materials. The stepless speed control knob provides smooth adjustments, ensuring optimal performance whether you are drilling thin steel or thick structural alloys.
Workers drilling large diameter holes
The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press handles a maximum hole capacity of 1.6 inches. This exceeds the 1.4-inch limit of the low-profile model. If your projects require larger core drilling diameters, this unit provides the necessary reach and power to complete those tasks efficiently.
Users prioritizing maximum magnetic pull
The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Press generates 2922 lbf of magnetic force. This is significantly stronger than the 2585 lbf force of the 1380W model. The higher attraction force ensures the drill remains securely attached to vertical or overhead metal surfaces during heavy-duty operation.
The products compared
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: tight spaces and thick metal drilling
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill press features a 1380W motor and a 1.4-inch hole capacity. It delivers 2585 lbf of magnetic force for secure mounting. The low profile design allows access to tight spaces. You get a 3/4-inch chuck capacity and 680 RPM speed. It weighs 28 pounds and measures 11 inches in length. This unit suits users needing portable, high-power drilling on metal surfaces.
Pros
- 1380W pure copper motor for efficient drilling
- 2585 lbf magnetic force on bases over 10mm thick
- Low profile design fits tight areas
- Safety feature stops motor if magnet fails
Cons
- 1.4-inch hole capacity is smaller than the 1.6-inch competitor
- Single speed of 680 RPM limits versatility
- Heavier at 28 pounds compared to lighter alternatives
Good fit if
- You need to drill large holes in thick steel plates
- You work in confined spaces where height is restricted
- You require strong magnetic hold for vertical or overhead drilling
Skip if
- You need to drill holes larger than 1.4 inches
- You require variable speed settings for different materials
- You prefer a lighter tool for frequent carrying
Verdict: iMeshbean 1380W Low Profile Mag Drill offers high magnetic force and a compact build for tight spaces, but its single speed and smaller hole capacity make it less versatile than the 1.6-inch 10-speed model.
iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill
Best for: drilling thick steel structures and plates
- Motor Power
- 1400W
- Spindle Speed
- 10-speed, 810 RPM
- Hole Capacity
- 1.6 in
- Magnetic Force
- 2922 lbf (13000N)
- Configuration
- Magnetic
- Cutting Width
- 6-Inch
View on Amazon: iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill Affiliate link
This iMeshbean magnetic drill press features a 1400W copper motor and a strong 2922 lbf magnetic base. It offers 10-speed settings with a top speed of 810 RPM and a 1.6-inch hole capacity. The unit weighs 28 pounds and includes a cooling pot for extended use. It suits professionals drilling steel structures or home users needing portable, high-torque power for hard materials.
Pros
- 1400W copper motor delivers high power for hard materials
- 2922 lbf magnetic base ensures secure attachment
- 10-speed control with reversible function
- Built-in cooling pot extends motor life
- Double dovetail guide rails provide smooth vertical adjustment
Cons
- Heavier 28-pound build reduces portability
- Lower 810 RPM max speed compared to faster models
- No stepless speed control despite marketing claims
Good fit if
- You need high magnetic holding force for vertical drilling
- You drill into thick steel plates or structures
- You want a portable unit with a cooling system
Skip if
- You require a lightweight drill for overhead work
- You need variable speed control finer than 10 settings
- You prioritize high RPM over raw torque
Verdict: iMeshbean 1400W 1.6-Inch Magnetic Drill Press is a robust choice for users drilling thick steel who value magnetic stability and cooling over lightweight portability.
Specifications side by side
| Spec | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Spindle Speed | 680 RPM | 10-speed, 810 RPM |
| Hole Capacity | 1.4 in (35 mm) | 1.6 in |
| Spindle Travel | 1.8 in (45 mm) | not stated |
| Magnetic Force | 2585 lbf (11500N) | 2922 lbf (13000N) |
| Chuck Capacity | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic |
| Target Material | Metal | not stated |
| Design | Low Profile | not stated |
| Cutting Width | not stated | 6-Inch |
| Dimensions | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 28 pounds | 28 pounds |
| Color | multi | multi |
| Model | WF23824 | WF22518A |
Frequently asked questions
Which iMeshbean mag drill is better for thick steel plates?
The iMeshbean 1400W 1.6-Inch 10-Speed Mag Drill is the better choice for thick steel. It features a 1400W pure copper motor that provides more power than the 1380W model. This extra wattage helps maintain speed under heavy loads. The 10-speed gearbox also allows you to select the optimal RPM for dense materials.
How do the dimensions of the 1380W model compare to the 1400W version?
The 1380W Low Profile model is significantly more compact. It measures 11 inches in length, 3.9 inches in width, and 8.3 inches in height. In contrast, the 1400W model is wider at 14.2 inches and deeper at 4.7 inches. The 1380W design is built to fit into tight spaces where the larger unit cannot reach.
Do both magnetic drills weigh the same?
Yes, both units weigh 28 pounds. Despite the difference in motor wattage and physical size, the total weight is identical. This balance suggests the 1380W model uses denser materials or a more compact internal layout. You will experience similar handling and portability requirements for both tools on site.
What is the main design difference between these two mag drills?
The primary difference is the form factor. The 1380W model uses a low-profile design to access confined areas. The 1400W model features a standard magnetic base with a 6-inch cutting width. This allows the 1400W unit to handle larger diameter holes or annular cutters more effectively than the compact 1380W version.
Is the 1380W model suitable for general metal drilling?
It is suitable for general tasks but lacks versatility. The 1380W model operates at a single speed, which limits its efficiency across different metal types. The 1400W model offers 10 speeds, allowing you to adjust RPM for various materials. If you need flexibility, the 1400W model is the stronger option.
Which model offers more magnetic stability for heavy work?
Both models feature dual-coil magnetic bases for secure attachment. However, the 1400W model is often described as robust for thick steel structures. Its larger footprint and higher power output contribute to stability during aggressive drilling. The 1380W model prioritizes compactness, which may limit its stability on very heavy, vibrating tasks.