Best Garvee Drill Presses: 10 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
We compare 10 models to help you find the best garvee drill presses for your shop. This list includes benchtop presses, floor-standing units, and magnetic drills for steel fabrication. Our top pick is the Garvee 13-Inch Floor Drill Press, which leads for general wood and metal floor drilling. It offers a versatile 12-speed range with a dependable 7.5-amp motor. We selected these picks based strictly on the specifications published on the listings. You can use these details to match capacity and speed to your specific project needs.
Quick picks
Our 10 picks
Garvee 13-Inch Floor Drill Press
Best for: general wood and metal floor drilling
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
This Garvee 13-inch floor drill press provides a 7.5-amp pure copper motor running on standard 120V power. You get 12 spindle speeds ranging from 288 to 3084 RPM to handle both wood and metal projects. With a 5/8-inch chuck capacity, 3.2-inch spindle travel, and a 10-by-10-inch tilting table, it gives you solid drilling capacity and reach for workshop tasks without requiring a commercial 240V circuit.
Pros
- 7.5-amp pure copper motor on 120V power
- 12-speed range spanning 288 to 3084 RPM
- 5/8-inch chuck and hole drilling capacity
- 3.2 inches of spindle travel
Cons
- Work table is relatively compact at 10 by 10 inches
- 13-inch swing is smaller than 15-inch floor alternatives
- No integrated LED work light or laser guide listed
Good fit if
- You need a floor drill press that runs on standard 120V power with a 5/8-inch chuck.
- You drill both wood and metal and want speeds starting as low as 288 RPM.
- You want 3.2 inches of spindle stroke for standard drilling depths.
Skip if
- You need a wider 15-inch swing for larger workpieces.
- You require factory-installed work lights or laser alignment systems.
Verdict: Garvee 13-Inch 7.5A Floor Drill Press combines a versatile 12-speed range with a dependable 7.5-amp motor for metal and woodworking. It offers balanced drilling depth and capacity if you do not need a larger 15-inch machine.
Garvee 10-Inch Variable-Speed Benchtop Drill Press
Best for: everyday benchtop woodworking and light metal drilling
- Motor Power
- 5A
- Spindle Speed
- 530-3140 RPM
- Swing
- 10-inch
- Spindle Travel
- 2-3/8 inch
- Chuck Capacity
- 1/16-1/2 inch
- Configuration
- Benchtop
View on Amazon: Garvee 10-Inch Variable-Speed Benchtop Drill Press
This compact benchtop drill press runs on a 5-amp motor with a 10-inch swing and 2-3/8 inches of spindle travel. You get stepless variable speed ranging from 530 to 3,140 RPM, paired with a real-time digital readout to match your bit to the material. It suits home woodworkers and light metalworkers who need precise speed control and laser alignment without dedicating floor space to a full-sized machine.
Pros
- Stepless variable speed from 530 to 3,140 RPM with a real-time digital display
- Worktable tilts up to 45 degrees with smooth height adjustment
- Built-in LED work light and laser positioning guide
- Standard 1/16-inch to 1/2-inch chuck capacity
Cons
- 2-3/8 inches of spindle travel limits deep boring tasks
- 10-inch swing limits the width of boards you can center-drill
- 5-amp motor provides less power than larger 7.5-amp alternatives
Good fit if
- You want seamless speed adjustment without manually moving drive belts.
- You need a benchtop machine that fits on a standard workbench surface.
- You drill varied materials that require exact, visible RPM settings.
Skip if
- You need more than 2-3/8 inches of plunge depth in a single stroke.
- You work with wide stock that requires a 13-inch or larger swing.
- You require a heavy-duty floor-standing machine for continuous production.
Verdict: Garvee 10-Inch Variable Speed Benchtop Drill Press delivers dial-in speed control, a digital display, and laser alignment in a compact footprint. It provides the right balance of versatility and workspace efficiency for general shop duties.
Garvee 15-Inch Floor Drill Press
Best for: large-scale wood and metal drilling projects
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 15 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
This floor-standing drill press provides a 15-inch swing powered by a 7.5-amp, 120V pure copper motor. You get a broad spindle speed range between 288 and 3084 RPM across 12 speeds, accommodating both wood and metal drilling. With a 5/8-inch chuck capacity, 3.2 inches of spindle travel, and a 12-by-12-inch tilting table, it suits woodworkers and metal fabricators who need extended reach and heavier drilling capabilities.
Pros
- Large 15-inch swing accommodates wider workpieces
- Broad 12-speed range spanning 288 to 3084 RPM
- 7.5-amp pure copper motor provides steady power for metal and wood
- 5/8-inch chuck capacity handles larger drill bits
Cons
- Large floor footprint requires dedicated shop floor space
- Spindle travel is limited to 3.2 inches
Good fit if
- You need a wide 15-inch swing to drill toward the center of large stock
- You require low speeds down to 288 RPM for drilling into metal
- You want a dedicated floor-standing machine with a 12-by-12-inch work table
Skip if
- You have limited floor space and need a compact benchtop machine
- You require more than 3.2 inches of spindle travel for deep-hole boring
Verdict: Garvee 15-Inch 7.5A Floor Drill Press delivers generous swing capacity and wide-range speed versatility for demanding shop projects. It is an excellent heavy-duty choice when standard 10-inch or 13-inch presses lack the clearance you require.
Garvee 13-Inch Floor Drill Press
Best for: general shop drilling in wood and metal
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
- Chuck Capacity
- 5/8 in
This floor-standing drill press gives you a 13-inch swing paired with a 7.5-amp induction motor running on standard 120V power. You get a broad speed range spanning 288 to 3,084 RPM across 12 settings, along with a 5/8-inch chuck and 3.2 inches of spindle travel. It suits you if you need floor-mounted capacity and dependable power for metal or woodworking projects without jumping up to a larger footprint.
Pros
- 7.5-amp 120V induction motor handles wood and metal drilling
- 12-speed range running from 288 to 3,084 RPM
- 5/8-inch chuck capacity with 3.2 inches of spindle travel
- Cast iron work table tilts 0 to 45 degrees
Cons
- Work table measures 10 by 10 inches, offering limited support for large sheet stock
- No integrated work light or laser guide listed in specifications
Good fit if
- You want a 13-inch swing with a dedicated floor-standing column
- You need low spindle speeds down to 288 RPM for metalwork
- You use bits with shank sizes up to 5/8 inch
Skip if
- You need more than 3.2 inches of spindle travel for deep drilling
- You have limited floor space and need a dedicated benchtop model
Verdict: Garvee 13-Inch 7.5A Floor Drill Press delivers reliable torque and a versatile 288 to 3,084 RPM range for diverse drilling tasks. It provides practical floor-mount capacity and a 5/8-inch chuck without unnecessary shop clutter.
Garvee 15-Inch Benchtop Drill Press
Best for: heavy-duty drilling on a dedicated workbench
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 15 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
This benchtop drill press provides a 15-inch swing paired with a 7.5-amp, 120-volt pure copper motor. You get a 5/8-inch chuck capacity, 3.2 inches of spindle travel, and a speed range from 288 to 3084 RPM across 12 settings. It suits you if you need the large throat capacity and motor output of a heavy-duty drill press mounted directly on a workbench rather than taking up floor space.
Pros
- Large 15-inch swing accommodates wider workpieces
- 7.5-amp pure copper motor provides consistent drilling power
- 12 speed settings spanning 288 to 3084 RPM
- Includes a swing-away safety guard and 12 by 12-inch tilting table
Cons
- Spindle travel is limited to 3.2 inches
- Substantial 19.5 by 11.6-inch base demands dedicated workbench space
- No integrated worklight or laser guide listed in specifications
Good fit if
- You need a wide 15-inch swing capacity in a benchtop configuration.
- You work with diverse materials requiring speeds from 288 to 3084 RPM.
- You drill larger holes requiring a 5/8-inch chuck capacity.
Skip if
- You need more than 3.2 inches of continuous spindle travel for deep bores.
- You prefer a free-standing floor drill press to preserve bench space.
Verdict: Garvee 15-Inch Benchtop Drill Press delivers wide throat depth and a 7.5-amp motor in a sturdy benchtop format. It is a capable choice for workshops that need high capacity without sacrificing floor real estate.
Garvee 2" 1850W Magnetic Drill
Best for: Heavy-duty structural steel coring and metal fabrication
- Motor Power
- 1850W
- Spindle Speed
- 10 speeds, up to 810 RPM
- Hole Capacity
- 2"
- Spindle Travel
- 2"
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
This heavy-duty magnetic drill gives you portable drilling power for steel and metal fabrication. Driven by an 1850W pure copper motor, it handles boring diameters up to 2 inches (50 mm) with a 2-inch drilling depth. You get 10 adjustable speed settings reaching up to 810 RPM, along with forward and reverse functionality. It suits your workflow if you need high-torque metal boring outside the limits of a stationary drill press.
Pros
- High-power 1850W motor with 10 adjustable speeds up to 810 RPM
- Large 2-inch boring diameter and 2-inch drilling depth capacity
- Titanium-magnesium alloy guide rail for corrosion and wear resistance
- Integrated millimeter scale for depth monitoring
- Multi-stage overload protection and dual-path thermal cooling
Cons
- Top speed peaks at 810 RPM, which is low for high-speed small-diameter drilling
- Heavier unit at 36.4 pounds compared to smaller benchtop models
- Fixed 2-inch spindle travel limits deep single-pass cuts
Good fit if
- You need to cut holes up to 2 inches wide in structural steel or thick alloys.
- You require a portable magnetic-base setup with variable speed control up to 810 RPM.
- You want integrated thermal management and motor overload protection for continuous metalwork.
Skip if
- You need a standard workshop drill press with speeds above 810 RPM for general woodworking.
- You require more than 2 inches of spindle travel for deep drilling passes.
- You work primarily on non-ferrous materials that cannot secure a magnetic base.
Verdict: Garvee 2" 1850W Magnetic Drill delivers 10 speeds and up to a 2-inch coring capacity for heavy-duty metal fabrication. It is a solid choice when you need substantial motor output and magnetic stability directly on your workpieces.
Garvee 1.57-Inch 1450W Magnetic Drill Press
Best for: portable structural steel and overhead magnetic drilling
- Motor Power
- 1450W
- Spindle Speed
- 10-speed, up to 820 RPM
- Hole Capacity
- 1.57 in
- Magnetic Force
- 2922 lbf
- Configuration
- Magnetic
- Design
- Portable
The Garvee 1.57-Inch 1450W Magnetic Drill Press is a portable metal-boring unit built for structural steel work. It features an electromagnetic base delivering 2,922 pounds of holding force, allowing you to secure the tool vertically or overhead. A 1,450-watt motor powers a 10-speed gearbox reaching up to 820 RPM for holes up to 1.57 inches across. At 27.2 pounds, it suits mobile fabricators needing high-clamping drilling on location.
Pros
- 2,922 lbf electromagnetic base secures to steel plates and beams in any orientation
- 10-speed gear system provides spindle speeds up to 820 RPM
- 1,450-watt motor supports large hole boring up to 1.57 inches in diameter
- Precision double dovetail column helps maintain alignment during operation
Cons
- Maximum spindle speed is limited to 820 RPM
- Package does not include coring or twist bits
- Requires a magnetic ferrous surface to clamp securely
Good fit if
- You need to bore holes up to 1.57 inches in structural steel on location
- You require overhead or vertical drilling capability secured by a 2,922 lbf magnet
- You want a 10-speed gearbox to tailor RPM to metal thickness
Skip if
- You work primarily with non-ferrous materials like wood, plastic, or aluminum
- You need high spindle speeds above 820 RPM for small-diameter twist bits
- You prefer a conventional stationary benchtop drill press with an adjustable worktable
Verdict: Garvee 1.57-Inch 1450W Magnetic Drill Press delivers strong 2,922 lbf clamping force and 10-speed mechanical control for demanding field steel fabrication. Its 27.2-pound portable frame makes it a reliable solution for heavy structural drilling in any position.
Garvee 13-Inch 7.5A Floor Drill Press
Best for: Floor-standing drilling in wood and metal
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
- Chuck Capacity
- 5/8 in
This Garvee floor drill press delivers power from a 7.5-amp, 120V pure copper motor with a 13-inch swing. You get a broad speed range spanning 288 to 3,084 RPM across 12 speeds, paired with a 5/8-inch chuck and 3.2 inches of spindle travel. If you regularly drill wood and metal and want dependable stationary capacity, this configuration gives you solid workshop versatility.
Pros
- 7.5-amp pure copper motor runs on standard 120V power
- 12-speed range from 288 to 3,084 RPM fits metal and wood
- 5/8-inch chuck capacity accepts larger bit shanks
- 3.2-inch spindle travel handles moderate drilling depths
Cons
- 10 x 10-inch work table provides limited support for wide boards
- 3.2-inch spindle travel restricts deep single-pass boring
Good fit if
- You need a 13-inch swing and 5/8-inch chuck for mixed wood and metal tasks
- You want low drilling speeds starting at 288 RPM for tougher materials
- You have floor space to accommodate an 18 x 11-inch base footprint
Skip if
- You need more than 3.2 inches of continuous plunge depth
- You frequently handle large panels that exceed a 10 x 10-inch table
Verdict: Garvee 13-Inch 7.5A Floor Drill Press offers balanced torque and a flexible 288 to 3,084 RPM speed range for stationary shop tasks. It is a capable choice whenever a 5/8-inch chuck and mid-sized table fit your project requirements.
Garvee 12 Ton H-Frame Hydraulic Press
Best for: pressing bearings, bushings, and straightening metal
- Dimensions
- 53.2 × 11 × 5.12 inches
Unlike the rotary drilling tools on this list, this Garvee unit is a 12-ton hydraulic H-frame shop press designed for pressing tasks rather than cutting holes. It features a carbon steel frame, an adjustable bed with eight height holes per side, and an automatic relief valve that triggers above 12 tons. It suits you if you need dedicated force for pressing bearings, bushings, ball joints, or bending metal alongside your machining setup.
Pros
- 12-ton capacity with an automatic pressure relief valve
- Adjustable working table with 8 height holes per side
- Carbon steel H-frame construction with powder-coated finish
- Includes two press plates
Cons
- Designed for pressing and metal bending, not hole drilling
- Manual hydraulic operation without an electric motor
Good fit if
- You need 12 tons of pressing force for bearings, bushings, or ball joints.
- You want an adjustable table height with eight height adjustment holes per side.
Skip if
- You need a dedicated drill press for cutting or boring holes.
- You need a motorized or benchtop rotary drilling machine.
Verdict: Garvee 12 Ton H-Frame Hydraulic Press is a heavy-duty shop press built with an adjustable 8-hole bed and an automatic 12-ton relief valve for pressing bearings and straightening metal.
Garvee 2-Inch 1550W Magnetic Drill Press
Best for: large-diameter drilling in structural steel
- Motor Power
- 1550W
- Spindle Speed
- 10-speed, up to 820 RPM
- Hole Capacity
- 1.57-2 in
- Magnetic Force
- 13000 N (2922 lbf)
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
The Garvee 2-Inch 1550W Magnetic Drill Press is a portable metal-drilling machine designed for fabrication and beam work. It features a 1550W motor, a 13,000 N (2,922 lbf) electromagnetic base, and a 1.57- to 2-inch boring capacity. With 10 speed settings reaching up to 820 RPM, you can match spindle speed to your bit size when drilling structural steel horizontally, vertically, or overhead.
Pros
- 13,000 N (2,922 lbf) electromagnetic base anchors to vertical, horizontal, or overhead steel
- 10 predefined speed settings up to a maximum of 820 RPM
- Large boring diameter from 1.57 to 2 inches
- Double dovetail column design minimizes feed play and wobble
Cons
- Top spindle speed is limited to 820 RPM
- Unit weighs 28.8 pounds for hand positioning
- Requires a ferrous metal contact surface to anchor
Good fit if
- You need to bore large holes up to 2 inches in thick steel beams.
- You drill in varied orientations including vertical and overhead positions.
- You require granular speed adjustments across 10 set levels.
Skip if
- You work primarily with wood or non-ferrous materials that cannot hold a magnet.
- You need high spindle speeds over 820 RPM for small-diameter twist bits.
- You prefer a conventional stationary benchtop machine with a standard work table.
Verdict: Garvee 2-Inch 1550W Magnetic Drill Press provides heavy clamping force and regulated speeds for heavy-duty metal fabrication. Its 13,000 N magnetic hold and double dovetail column ensure stable, precise drilling through thick structural steel.
Specifications side by side
| Spec | Garvee 13-Inch Floor Drill Press | Garvee 10-Inch Variable-Speed Benchtop Drill Press | Garvee 15-Inch Floor Drill Press | Garvee 13-Inch Floor Drill Press | Garvee 15-Inch Benchtop Drill Press | Garvee 2" 1850W Magnetic Drill | Garvee 1.57-Inch 1450W Magnetic Drill Press | Garvee 13-Inch 7.5A Floor Drill Press | Garvee 12 Ton H-Frame Hydraulic Press | Garvee 2-Inch 1550W Magnetic Drill Press |
|---|---|---|---|---|---|---|---|---|---|---|
| Motor Power | 7.5 Amp | 5A | 7.5 Amp | 7.5A | 7.5 Amp | 1850W | 1450W | 7.5A | not specified | 1550W |
| Spindle Speed | 12-speed, 288-3084 RPM | 530-3140 RPM | 12-speed, 288-3084 RPM | 12-speed, 288-3084 RPM | 12-speed, 288-3084 RPM | 10 speeds, up to 810 RPM | 10-speed, up to 820 RPM | 12-speed, 288-3084 RPM | not specified | 10-speed, up to 820 RPM |
| Hole Capacity | 5/8" | not specified | 5/8" | 5/8 in | 5/8" | 2" | 1.57 in | 5/8 in | not specified | 1.57-2 in |
| Swing | 13 in | 10-inch | 15 in | 13 in | 15 in | not specified | not specified | 13 in | not specified | not specified |
| Spindle Travel | 3.2" | 2-3/8 inch | 3.2" | 3.2 in | 3.2" | 2" | not specified | 3.2 in | not specified | not specified |
| Magnetic Force | not specified | not specified | not specified | not specified | not specified | not specified | 2922 lbf | not specified | not specified | 13000 N (2922 lbf) |
| Chuck Capacity | 5/8" | 1/16-1/2 inch | 5/8" | 5/8 in | 5/8" | not specified | not specified | 5/8 in | not specified | not specified |
| Voltage | 120V | not specified | 120V | 120V | 120V | not specified | not specified | 120V | not specified | not specified |
| Configuration | Benchtop | Benchtop | Benchtop | Benchtop | Benchtop | Magnetic | Magnetic | Benchtop | not specified | Magnetic |
| Speed Settings | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | not specified | Variable Speed | not specified | Variable Speed |
| Amperage | 7.5 A | 5 A | 7.5 A | 7.5 A | 7.5 A | not specified | not specified | 7.5 A | not specified | not specified |
| Features | Tilting Table | Tilting Table, Work Light, Laser Guide | Tilting Table | Tilting Table | Tilting Table | not specified | not specified | Tilting Table | not specified | not specified |
| Target Material | Metal, Wood | Wood, Plastic | Metal, Wood | Metal, Wood | Metal, Wood | Metal, Plastic | not specified | Metal, Wood | not specified | Metal |
| Design | not specified | not specified | not specified | not specified | not specified | not specified | Portable | not specified | not specified | Portable |
| Dimensions | 57 × 20.5 × 10 inches | 12.4 × 19.3 × 33.7 inches | 57 × 20.5 × 10 inches | 57 × 20.5 × 10 inches | 57 × 20.5 × 10 inches | 20.9 × 5.91 × 17.1 inches | 13.2 × 6.3 × 16.1 inches | 57 × 20.5 × 10 inches | 53.2 × 11 × 5.12 inches | 13.2 × 6.3 × 16.1 inches |
| Weight | not specified | 60.4 pounds | not specified | not specified | not specified | 36.4 pounds | 27.2 pounds | not specified | not specified | 28.8 pounds |
| Size | 13 in Floor Copper Motor Drill Press | 10 inch | 15 in Copper Motor Floor Drill Press | 13 in Floor Drill Press | not specified | 1850W-2" with Speed Control and Forward/Reverse | 1.57" Basic | 13 in Floor Copper Motor Drill Press | 12T | High-end Version |
| Model | 01 | DP30016BVS | 01 | 01 | 01 | Drill Press | 1.57" Capacity | 01 | MXclrVAdo3TwxAA_et2h9ACo8c | Mag Drill Press |
| Color | not specified | Red | not specified | not specified | not specified | not specified | No Bit | not specified | Blue | not specified |
Garvee Drill Press Lineup Overview
Garvee offers distinct configurations to match your workspace. The 13-Inch Floor Drill Press and 15-Inch Benchtop Drill Press provide heavy capacity with 7.5-amp motors. These units suit users needing stable, stationary drilling for wood or metal. The 10-Inch Variable-Speed Benchtop Drill Press is smaller, featuring a digital display and laser guide for precise benchtop tasks. Magnetic drills like the 2-Inch 1850W model target structural steel fabrication with high clamping force. Speed settings vary from fixed ranges to variable control, allowing you to select the right tool for your specific material and project scale.
Where Garvee Fits Your Shop
Garvee covers a wide range of drilling needs. You can choose compact 10-inch benchtop models or heavy 15-inch floor units. The 10-inch benchtop includes a digital display and laser guide, while the larger floor presses feature tilting tables. Magnetic drills offer portable, high-clamping force options for structural steel. A hydraulic press rounds out the lineup for pressing tasks. The range lacks small 3/4-inch or 8-inch benchtop options. You also will not find cordless or battery-powered drills in this collection. All electric models require standard 120V outlets.
If you need portable torque rather than stationary capacity, evaluate specs for the best drill drivers with drill driver.
How to choose the right garvee drill press
-
Check your swing capacity
The swing rating defines the maximum distance from the spindle to the column. This number determines the radius of the material you can drill in a single setup. A 10-inch swing handles standard lumber and small metal stock. If you need to drill near the center of large sheets, look for a 13-inch or 15-inch model. The Garvee 15-Inch Benchtop Drill Press offers wide throat depth for these larger projects. Ensure your workpieces fit within this radius to avoid collisions with the column.
-
Select the right configuration
Your workshop layout dictates whether you need a benchtop or floor model. Benchtop units sit on your workbench and save floor space. The Garvee 10-Inch Variable-Speed Benchtop Drill Press is compact for general duties. Floor-standing units provide greater stability and height for heavy materials. The 13-Inch Floor Drill Press stands at 57 inches tall. Magnetic drills offer portable solutions for structural steel. Choose the configuration that matches your available workspace and the weight of the items you plan to drill.
-
Match speed settings to material
Different materials require specific rotation speeds for clean cuts and tool longevity. Variable speed controls allow you to adjust RPMs for wood or metal. Harder metals need slower speeds to prevent overheating. Softer woods often drill faster. The Garvee 13-Inch Floor Drill Press includes a versatile speed range for diverse tasks. Magnetic drills like the 2-Inch 1550W model offer ten speeds for steel fabrication. Select a machine with variable settings to ensure you can optimize performance for every project type.
-
Evaluate motor amperage
Motor amperage indicates the power available for drilling through tough materials. Higher amperage provides more torque for large holes or dense metals. Most Garvee benchtop and floor models feature a 7.5-amp motor. This power level handles general wood and metal drilling effectively. The 10-inch benchtop version uses a 5-amp motor, which suits light duties. Magnetic drills offer higher wattage, such as 1850W, for heavy structural work. Check the amperage to ensure the machine can handle your heaviest expected loads without stalling.
-
Consider useful features
Features like tilting tables, laser guides, and work lights improve accuracy and safety. A tilting table allows angled drilling for joinery or metal fabrication. The Garvee 13-Inch Floor Drill Press includes this adjustment. Laser guides help align your drill bit precisely before you start. The 10-inch benchtop model features a laser for better visibility. Work lights illuminate dark workpieces. Evaluate which features align with your specific projects. These additions can reduce setup time and improve the quality of your final holes.
Frequently asked questions
Which Garvee drill press is best for general wood and metal work?
The Garvee 13-Inch Floor Drill Press is the top choice for general drilling tasks. It features a 7.5-amp motor and variable speed settings to handle both wood and metal effectively. The unit includes a tilting table for angled work. Its 13-inch swing capacity offers a balanced mix of reach and stability for most shop projects.
Does Garvee make a small benchtop drill press with digital controls?
Yes, the Garvee 10-Inch Variable-Speed Benchtop Drill Press includes a digital display for precise speed control. It is designed for everyday woodworking and light metal drilling. This compact model also features a laser guide for alignment and a work light. It weighs 60.4 pounds, making it stable for benchtop use while remaining portable enough for smaller workshops.
What is the largest swing capacity available in the Garvee lineup?
Garvee offers 15-inch swing capacity in both floor-standing and benchtop configurations. The 15-Inch Floor Drill Press and the 15-Inch Benchtop Drill Press both provide this generous reach. These models are ideal for large-scale projects where you need to drill closer to the edge of wide stock. Both feature 7.5-amp motors for consistent power.
Are there magnetic drills for structural steel fabrication?
Garvee produces several magnetic drills for heavy-duty steel work. The 2-Inch 1550W Magnetic Drill Press offers 13,000 N of clamping force for thick structural steel. Another option is the 1.57-Inch 1450W model, which provides 2,922 lbf of clamping force. These units are portable and designed for field use, ensuring stable drilling in any position.
Do the floor drill presses include tilting tables?
Yes, the Garvee 13-Inch Floor Drill Press and the 15-Inch Floor Drill Press both include tilting tables. This feature allows you to drill at various angles without repositioning the workpiece. Both units are powered by 7.5-amp motors and support variable speed settings. They are suitable for stationary shop tasks involving wood or metal materials.
Which Garvee drill press has the highest motor amperage?
The floor-standing and large benchtop models feature the highest motor amperage at 7.5 amps. This includes the 13-Inch Floor Drill Press, the 15-Inch Floor Drill Press, the 15-Inch Benchtop Drill Press, and the other 13-Inch floor variant. The 10-Inch Benchtop model uses a 5-amp motor, while magnetic drills list wattage instead of amperage.
Is there a hydraulic press in the Garvee selection?
The list includes a Garvee 12 Ton H-Frame Hydraulic Press. It is designed for pressing bearings, bushings, and straightening metal. The press features an adjustable bed with eight holes and an automatic relief valve. Although not a drill press, it complements the lineup for general shop fabrication tasks requiring high pressure.