Acekool Magnetic Drill Alternatives: 6 Similar Picks Compared

Comparing Acekool Alternatives

VEVOR 1450W Variable Speed Magnetic Drill

The VEVOR 1450W model trades some raw power for a lighter frame. It weighs 26.5 pounds, which is 9.9 pounds less than the Acekool. This makes it easier to carry to job sites. It shares the same 2-inch boring diameter, so you can drill the same size holes. However, it has a shorter height of 14.2 inches compared to the Acekool’s 17.1 inches. This compact design suits thick steel plate fabrication well. You give up the Acekool’s 1850W motor strength but gain a more manageable weight. Pick this if you need high capacity without the bulk of a heavier unit.

VEVOR 1.6-Inch Variable Speed Magnetic Drill Press

This VEVOR 1.6-inch model is significantly smaller than the Acekool. It weighs 26.5 pounds, saving you 9.9 pounds of weight. The height is also shorter at 14.2 inches. You give up the larger 2-inch capacity, limiting you to smaller holes. The motor wattage is not listed, but the build suggests a focus on precision over heavy-duty penetration. It features variable speed settings for better control. This pick fits users who do not need the Acekool’s maximum 2-inch boring diameter. It is a solid choice for steel fabrication where smaller holes suffice. You trade capacity for a more compact and potentially more agile tool.

VEVOR 1300W Portable Magnetic Drill Press

The VEVOR 1300W model is the lightest option at 24.3 pounds. It is 12.1 pounds lighter than the Acekool. You give up the Acekool’s 1850W power and 2-inch capacity for a 1.57-inch limit. The height is much lower at 10.6 inches. This design prioritizes portability and high holding force over maximum drilling size. It fits users who value precision and a compact package more than raw power. The motor is rated at 1300W, which is less than the Acekool’s output. Pick this if you need a reliable, portable drill for on-site work where weight matters more than the largest possible hole diameter.

ZELCAN 1550W 2-Inch Magnetic Drill Press

The Zelcan 1550W model is the most compact in this group. It weighs 23.8 pounds, which is 12.6 pounds less than the Acekool. It also has the smallest footprint, with a length of 9.8 inches. You give up the Acekool’s 2-inch capacity and 1850W motor power. The motor is rated at 1550W. This model focuses on robust power and secure anchoring for heavy metal work. It fits professionals who need reliable depth control on steel fabrication projects. You trade the Acekool’s larger boring diameter for a significantly lighter and more portable design. Choose this if you prioritize weight savings and stability over maximum hole size.

VEVOR 1400W 1.6-Inch Magnetic Drill Press

This VEVOR 1400W model is lighter than the Acekool at 27.3 pounds. It saves you 9.1 pounds of weight. The height is also lower at 11.4 inches. You give up the Acekool’s 2-inch capacity for a 1.6-inch limit. The motor is 1400W, which is less powerful than the Acekool’s 1850W. It offers solid holding power and includes bits for fabrication work. This pick fits users who need a portable, all-in-one solution for moderate steel drilling tasks. You trade the Acekool’s larger boring diameter and higher power for a more compact and versatile package. It is a good choice for portable construction drilling where weight and size are concerns.

Zinnore 1150W Magnetic Drill Press

The Zinnore 1150W model is lighter than the Acekool at 32.3 pounds. It saves you 4.1 pounds. The height is similar at 17.3 inches. You give up the Acekool’s 1850W power and 2-inch capacity. The motor is rated at 1150W, which is significantly less powerful. This model offers solid versatility for tapping and moderate drilling tasks. It fits users who need reliable magnetic stability on uneven surfaces without requiring maximum hole capacity. The Acekool is better for heavy structural work. Pick this if you need a magnetic drill for moderate tasks where the Acekool’s extra power and capacity are unnecessary. You trade power for a slightly lighter, versatile tool.

Quick picks

Our 7 picks

1 Best overall

Acekool 1850W Magnetic Drill, 2" Capacity

Best for: heavy structural steel fabrication and maintenance

Motor Power

1750W / 1850W

Spindle Speed

10-speed, 810 RPM

Hole Capacity

2 in (50 mm)

Spindle Travel

50 mm

Magnetic Force

2922 lbf

Configuration

Magnetic

View on Amazon: Acekool 1850W Magnetic Drill, 2" Capacity

The Acekool magnetic drill delivers 1850W of power with a 2922 lbf holding force. It bores holes up to 2 inches in diameter at speeds up to 810 RPM. The unit weighs 36.4 pounds and features a 50 mm spindle travel. You get a 10-speed control system and a titanium-magnesium alloy guide rail. This setup suits heavy structural steel work and industrial maintenance tasks.

Pros

• 1850W motor provides high torque for hardened steel
• 2922 lbf magnetic base ensures secure attachment
• 2-inch boring diameter handles large core drilling
• 10-speed control allows precise RPM adjustment
• Titanium-magnesium alloy guide rail resists wear

Cons

• 36.4-pound weight reduces portability for some users
• 17.1-inch height limits clearance in tight spaces
• 20.9-inch length requires more storage space

Good fit if

• You need to drill large holes in thick steel plates
• You require a high holding force for vertical work
• You prefer a durable alloy guide rail for longevity

Skip if

• You need a lightweight tool for overhead work
• You require a smaller footprint for confined areas
• You only drill small holes in thin metal

Verdict: Acekool 1850W Magnetic Drill, 2" Capacity offers robust power and strong holding force for heavy fabrication. It fits users who prioritize drilling capacity and durability over compact portability.

2 Best premium

VEVOR 1450W Variable Speed Magnetic Drill

Best for: Thick steel plate fabrication

Motor Power

1450W

Spindle Speed

0-750 RPM

Hole Capacity

2" / 50 mm

Spindle Travel

2" / 50 mm

Magnetic Force

2922 lbf / 13,000 N

Configuration

Magnetic

View on Amazon: VEVOR 1450W Variable Speed Magnetic Drill

The VEVOR 1450W magnetic drill offers a 2-inch boring diameter and 2922 lbf holding force for steel fabrication. It features variable speed from 0-750 RPM and a 2-inch spindle travel. The 26.5-pound unit includes overload protection and a built-in scale. It suits users needing portable, heavy-duty drilling on thick steel plates.

Pros

• 2922 lbf magnetic holding force
• 2-inch max boring diameter
• 1450W copper motor
• Built-in measurement scale

Cons

• 26.5-pound weight
• Not suitable for stainless steel
• Requires steel plates 0.39 inches thick minimum

Good fit if

• You need a 2-inch drilling capacity
• You work with mild steel plates
• You require high holding force

Skip if

• You drill stainless steel
• You need to cut thin plates
• You prefer a lighter tool

Verdict: VEVOR 1450W 2" Magnetic Drill delivers strong holding power and a large boring diameter for thick steel work. It fits fabricators who prioritize capacity and stability over portability.

3 Also great

VEVOR 1.6-Inch Variable Speed Magnetic Drill Press

Best for: steel fabrication and heavy-duty metalworking

Motor Power

1450W

Spindle Speed

0-800 RPM (10-speed)

Hole Capacity

1.6 in (40 mm)

Spindle Travel

2 in / 50 mm

Magnetic Force

2810 lbf / 12500 N

Configuration

Magnetic

View on Amazon: VEVOR 1.6-Inch Variable Speed Magnetic Drill Press

This VEVOR magnetic drill press features a 1450W copper motor and 2810 lbf holding force. It drills up to 1.6 inches in diameter at speeds of 0-800 RPM. The unit weighs 26.5 pounds and includes a 2-inch spindle travel. You get a 10-speed variable gear system for precise control. It is designed for steel plates 0.39 inches thick or more. This tool suits industrial fabrication and heavy-duty metalworking tasks.

Pros

• 1450W motor provides strong drilling power
• 2810 lbf magnetic force anchors securely
• 10-speed variable settings for precision
• Ergonomic handle and extended cranks

Cons

• 1.6 inch boring diameter is smaller than competitors
• Not suitable for stainless steel or cast iron
• Requires steel plate thickness of at least 0.39 inches

Good fit if

• You need a portable drill for steel fabrication
• You require variable speed control for accuracy
• You work on vertical or horizontal surfaces

Skip if

• You need to drill holes larger than 1.6 inches
• You frequently drill stainless steel or cast iron
• You require a drill for plates thinner than 0.39 inches

Verdict: VEVOR 1450W Magnetic Drill Press offers reliable performance for steel work. It fits users who need variable speeds and secure anchoring for industrial projects.

4 Best budget

VEVOR 1300W Portable Magnetic Drill Press

Best for: Heavy-duty metal fabrication and on-site drilling

Motor Power

1300W

Spindle Speed

810 RPM

Hole Capacity

1.57" (40mm)

Spindle Travel

50mm

Magnetic Force

2922lbf / 13000N

Configuration

Magnetic

View on Amazon: VEVOR 1300W Portable Magnetic Drill Press

The VEVOR 1300W magnetic drill press offers 2922 lbf holding force and a 1.57-inch boring diameter. It runs at 810 RPM with a 50mm spindle travel. The unit weighs 24.3 pounds and includes a millimeter scale for precision. This portable design suits metal fabrication and industrial applications where stable anchoring is required.

Pros

• 1300W copper motor provides robust drilling power
• 2922 lbf magnetic force ensures stable anchoring
• Built-in millimeter scale aids precise hole placement
• Titanium magnesium alloy guide rail resists wear

Cons

• 1.57-inch boring diameter is smaller than competitors
• 810 RPM speed is lower than other options
• 24.3-pound weight is heavier than some peers

Good fit if

• You need strong magnetic anchoring for vertical work
• You require a portable unit for on-site fabrication
• You prioritize holding force over maximum hole size

Skip if

• You need to drill holes larger than 1.57 inches
• You require higher spindle speeds for faster cutting
• You prefer a lighter tool for extended overhead use

Verdict: VEVOR 1300W Magnetic Drill 1.57" fits users who value high holding force and precision over maximum boring diameter. It is a solid choice for metal workers who need reliable performance in a portable package.

5 Best 1550w

ZELCAN 1550W 2-Inch Magnetic Drill Press

Best for: Heavy-duty steel fabrication and bridge work

Motor Power

1550W

Spindle Speed

0-580 rpm

Hole Capacity

2"

Magnetic Force

13000N (2,922 lbf)

Configuration

Magnetic

Target Material

Metal

View on Amazon: ZELCAN 1550W 2-Inch Magnetic Drill Press

The Zelcan 1550W magnetic drill press anchors firmly with 13000N of force to drill holes up to 2 inches in diameter. It offers stepless speed control from 0 to 580 rpm and includes a built-in depth scale and coolant tank. This portable unit suits heavy-duty metal fabrication, shipbuilding, and bridge construction where secure mounting and precise depth control matter.

Pros

• 1550W copper motor provides strong drilling power
• 13000N (2,922 lbf) magnetic force for secure mounting
• Stepless speed control from 0 to 580 rpm
• Built-in depth scale and 8.5 fl. oz. coolant tank

Cons

• Maximum boring diameter is 2 inches, limiting larger hole needs
• Maximum speed of 580 rpm is lower than some competitors
• Weight of 23.8 pounds makes it less portable than lighter models

Good fit if

• You need strong magnetic anchoring for vertical or overhead work
• You require stepless speed adjustment for precise control
• You drill holes up to 2 inches in diameter

Skip if

• You need to drill holes larger than 2 inches
• You require higher spindle speeds for faster material removal
• You prioritize a lighter unit for frequent transport

Verdict: Zelcan 1550W Magnetic Drill Press delivers robust power and secure anchoring for heavy metal work. It fits professionals who need reliable depth control and strong holding force on steel fabrication projects.

6 Also great

VEVOR 1400W 1.6-Inch Magnetic Drill Press

Best for: Steel fabrication and portable construction drilling

Motor Power

1400W

Spindle Speed

800 RPM

Hole Capacity

1.6 in / 40 mm

Spindle Travel

2 in / 50 mm

Magnetic Force

2810 lbf / 12500N

Configuration

Magnetic

View on Amazon: VEVOR 1400W 1.6-Inch Magnetic Drill Press

This VEVOR magnetic drill press offers 1400W of power and 2810 lbf of holding force. It drills up to 1.6 inches into steel plates 10 mm thick or more. The unit includes 11 core bits and features a scale for depth measurement. It is designed for portable use in fabrication, shipbuilding, or windmill construction. You get a stable base for angled drilling. This model suits those needing moderate capacity with included accessories.

Pros

• 1400W copper motor provides strong driving force.
• 2810 lbf magnetic force anchors securely at any angle.
• Includes 11 core bits for various drilling needs.
• Built-in scale helps pinpoint hole depth accurately.

Cons

• 1.6 inch boring diameter is smaller than 2 inch competitors.
• Not suitable for stainless steel or cast iron materials.
• 800 RPM spindle speed is lower than some alternatives.

Good fit if

• You need a portable drill for steel fabrication or construction.
• You want a complete kit with 11 included core bits.
• You require secure anchoring for drilling at angles or overhead.

Skip if

• You need to drill holes larger than 1.6 inches.
• You work with stainless steel or cast iron regularly.
• You require higher spindle speeds for specific metal types.

Verdict: VEVOR 1400W 1.6 in Mag Drill fits users who need a portable, all-in-one solution for moderate steel drilling tasks. It offers solid holding power and included bits for fabrication work.

7 Also great

Zinnore 1150W Magnetic Drill Press

Best for: Moderate drilling and tapping tasks

Motor Power

1150W

Hole Capacity

5/8 in (16 mm)

Magnetic Force

2360 lbs / 10500N

Configuration

Magnetic

Target Material

Metal

Design

Portable

View on Amazon: Zinnore 1150W Magnetic Drill Press

The Zinnore mag drill press features a 1150W motor and 2360 lbs of magnetic force. It supports twist drilling up to 5/8 inch and tapping from M5 to M12. The unit weighs 32.3 pounds and measures 16.9 inches long. This portable design suits vertical or sloped metal work. It fits users needing reliable performance for fabrication or maintenance tasks.

Pros

• 1150W motor provides efficient power for drilling and tapping
• 2360 lbs magnetic force secures the drill on various surfaces
• Supports 5/8 inch twist drilling and M5-M12 tapping
• Titanium-magnesium alloy guide rails resist corrosion and wear

Cons

• Smaller 5/8 inch hole capacity compared to 2-inch alternatives
• Lower 1150W motor power than 1400W+ competitors
• Heavier 32.3 lb build limits portability for some users

Good fit if

• You need a machine for tapping operations alongside drilling
• You work on vertical or sloped metal surfaces
• You require a portable unit for constrained spaces

Skip if

• You require drilling holes larger than 5/8 inch
• You need maximum power for heavy industrial fabrication
• You prioritize the lightest possible portable tool

Verdict: Zinnore 1150W Mag Drill Press offers solid versatility for tapping and moderate drilling tasks. It fits users who need reliable magnetic stability on uneven surfaces without requiring maximum hole capacity.

Specifications side by side

Frequently asked questions