Best Baileigh Drill Presses: 14 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best baileigh drill presses requires balancing capacity, motor power, and machine footprint. The brand's lineup includes compact 14-inch benchtop units, 22-inch floor models, large radial presses, and H-frame shop presses, with select options including an integrated work light.
The Baileigh 2 HP Gear-Driven Mill and Drill takes the top spot for its ability to handle combined milling and heavy drilling on 110V power. We compared 14 products using only the specifications published on their listings to help you find the right setup.
Quick picks
Our 14 picks
Baileigh 2 HP Gear-Driven Mill and Drill
Best for: Combined milling and heavy drilling on 110V power
- Motor Power
- 2 hp
- Spindle Speed
- 90, 210, 345, 670, 1180, 1970 rpm
- Hole Capacity
- 1.5”
- Chuck Capacity
- R8 Spindle
- Voltage
- 110V
- Features
- Work Light
This machine combines milling and drilling capabilities with a 2 hp motor running on standard 110V power. It delivers a 1.5-inch maximum drilling capacity and provides six gear-driven spindle speeds ranging from 90 to 1970 rpm. The unit includes a 29-inch by 8-inch milling table, an R8 spindle taper, a work light, and a coolant system. It suits you if you need both drilling and light milling on standard electrical service.
Pros
- 2 hp motor operates on standard 110V power
- 1.5-inch maximum drilling capacity
- Gear-driven head with 6 spindle speeds from 90 to 1970 rpm
- Includes 29-inch by 8-inch milling table and R8 spindle taper
- Comes with stand, coolant system, and work light
Cons
- Top spindle speed reaches only 1970 rpm
- Uses six fixed gear settings rather than variable-speed control
Good fit if
- You need both milling and drilling functions in a single 110V setup.
- You work with large bits requiring up to a 1.5-inch hole capacity.
- You want a machine that includes a stand, coolant system, and work light.
Skip if
- You need high-speed drilling above 1970 rpm.
- You require continuously variable speed adjustment without gear changes.
Verdict: Baileigh 2 HP Gear-Driven Mill and Drill pairs heavy-duty 1.5-inch hole capacity with a milling table on standard 110V power. It provides reliable metalworking versatility with its included stand, work light, and integrated coolant system.
Baileigh 100-Ton Pneumatic H-Frame Shop Press
Best for: heavy industrial pressing and metal forming
- Weight
- 1700 pounds
View on Amazon: Baileigh 100-Ton Pneumatic H-Frame Shop Press
This heavy-duty machine is a 100-ton pneumatic shop press built around a fully-welded plate steel frame. You get a 31-inch working width alongside an 11.8-inch stroke length operated by a foot pedal or manual hand lever. Its 6.5-inch lateral cylinder adjustment assists with off-center workpieces, and it includes V-blocks. Weighing 1,700 pounds, it suits industrial metalworking environments that require immense pressing force rather than rotational drilling.
Pros
- 100-ton pressing capacity with industrial-grade hydraulic components
- 31-inch working width and 11.8-inch stroke length
- 6.5-inch lateral cylinder movement for pressing off-center parts
- Dual operation with foot pedal and hand-operated lever
- Fully-welded plate steel frame includes a set of V-blocks
Cons
- 1,700-pound weight requires specialized handling to move and place
- Functions as a press rather than a rotary drilling tool
Good fit if
- You need 100 tons of hydraulic pressing force for heavy component assembly or metalwork.
- You require lateral cylinder adjustment to work on off-center workpieces.
- You want the choice between a hands-free foot pedal and a manual control lever.
Skip if
- You need a motorized rotating spindle to drill holes through workpieces.
- You have a small workshop unable to handle a 1,700-pound stationary machine.
Verdict: Baileigh 100-Ton Pneumatic H-Frame Shop Press delivers high-tonnage capacity with a movable cylinder and dual-control operation for demanding forming tasks. Its 1,700-pound welded steel frame ensures minimal flex during maximum-load pressing.
Baileigh 20-Inch Gear-Driven Drill Press
Best for: 110V metal fabrication and low-RPM tapping
- Motor Power
- 1-1/2 HP
- Spindle Speed
- 125, 420, 535, and 1740 RPM
- Swing
- 20 in
- Voltage
- 110V
- Dimensions
- 28.2 × 19.7 × 67.3 inches
- Weight
- 484 pounds
The Baileigh 20-Inch Gear-Driven Drill Press gives you a 20-inch swing powered by a 1-1/2 HP motor running on standard 110V power. Its gear-driven transmission supplies four fixed speeds ranging from 125 to 1740 RPM for drilling and tapping tasks. Mounted on a 4-inch column and a cast iron base, it weighs 484 pounds. It suits shops needing a heavy, rigid floor machine that plugs directly into standard electrical circuits without 220V wiring.
Pros
- Runs on standard 110V single-phase electrical service
- Rigid 4-inch diameter column reduces flexing during operation
- Gear-driven transmission provides low speeds down to 125 RPM
- Includes a bendable halogen work light and protective spindle guard
Cons
- Offers only four discrete gear speeds rather than variable speed
- Top spindle speed caps at 1740 RPM
- At 484 pounds, it is difficult to relocate once positioned
Good fit if
- You need a 20-inch swing drill press that runs on standard 110V power.
- You want gear-driven torque down to 125 RPM for drilling hard metals or tapping.
- You require the stability of a 4-inch column and cast iron base.
Skip if
- You need spindle speeds higher than 1740 RPM for small-diameter work.
- You prefer continuously variable speed control over gear changes.
- You have limited floor space or cannot accommodate a 484-pound machine.
Verdict: Baileigh 20-Inch Gear-Driven Drill Press delivers rigid, low-RPM gear-driven drilling performance from a standard 110V outlet. Its 4-inch column and cast iron base make it a dependable workhorse for metal drilling and tapping.
Baileigh 22-Inch Variable-Speed Drill Press
Best for: metal fabrication requiring tapping and coolant
- Motor Power
- 2 HP
- Spindle Speed
- 85 to 2000 RPM
- Hole Capacity
- 1.25″
- Swing
- 20.8″
- Voltage
- 220 V
- Speed Settings
- Variable Speed
This floor-standing machine delivers heavy-duty fabrication capability with its 2 HP inverter-driven motor and 20.8-inch swing. You can adjust the spindle continuously from 85 to 2000 RPM while monitoring the digital readout. With a 1.25-inch drilling capacity in mild steel, an auto-reversing tap feature, and an integrated base coolant system, it suits metalworking shops handling tough production tasks.
Pros
- Inverter-driven 2 HP motor with variable speed from 85 to 2000 RPM
- Digital RPM readout for spindle speed tracking
- 1.25-inch hole drilling capacity in mild steel
- Built-in auto-reversing tap function
- Base-mounted coolant system with spray behind a safety guard
Cons
- Requires a 220 V single-phase electrical supply
- Top spindle speed tops out at 2000 RPM
- Large floor footprint measuring 60 by 44 inches
Good fit if
- You need to tap threads using a dedicated auto-reversing function
- You drill large holes up to 1.25 inches in mild steel
- You have a dedicated 220 V power source in your shop
Skip if
- You only have standard 110 V or 115 V wall outlets available
- You require spindle speeds higher than 2000 RPM for very small drill bits
- You have limited floor space for a 79-inch tall machine
Verdict: Baileigh 22-Inch Variable-Speed Drill Press delivers heavy-duty metal drilling performance with its 2 HP motor, wide variable speed range, and integrated coolant setup.
Baileigh 14-Inch Belt Drive Drill Press
Best for: everyday metal drilling on standard 115V power
- Motor Power
- 1/2-hp
- Spindle Speed
- Five speeds, 250 to 2900 RPM
- Hole Capacity
- 5/8"
- Swing
- 14-Inch
- Voltage
- 115V
- Dimensions
- 29 × 28 × 67 inches
The Baileigh 14-Inch Belt Drive Drill Press gives you a 14-inch swing and runs on standard 115-volt power with its 1/2-hp motor. It delivers five spindle speeds ranging from 250 to 2900 RPM via a belt-driven head, handling up to 5/8-inch holes in steel. Standing 67 inches tall with a rigid cast iron base and table, this 211-pound machine fits workshops needing dependable metal drilling without dedicated high-voltage wiring.
Pros
- Operates on standard 115-volt single-phase power
- Drills up to 5/8-inch holes in steel
- Spindle speed range spans 250 to 2900 RPM across five steps
- Rigid 2-7/8-inch steel column with cast iron base and table
- Equipped with a safety shield around the drill head
Cons
- Speed changes require manual belt repositioning across five set speeds
- 1/2-hp motor provides limited power for continuous heavy milling or deep boring
- Floor-standing 67-inch height and 211-pound weight require dedicated floor space
Good fit if
- You need to drill up to 5/8-inch steel on standard 115-volt workshop outlets.
- You want a heavy cast iron floor machine with a rigid 2-7/8-inch steel column.
- You work within a 250 to 2900 RPM spindle speed range.
Skip if
- You prefer dial-operated variable speed over manual belt pulleys.
- You need more than 1/2 horsepower for heavy-duty metal fabrication.
- You require a compact benchtop machine rather than a 67-inch-tall floor press.
Verdict: Baileigh 14-Inch Belt Drive Drill Press provides reliable 5/8-inch steel drilling capacity and sturdy cast iron construction using standard 115-volt power. It is a solid floor-standing choice for general metalworking where manual speed selection is sufficient.
Baileigh 12-Inch 3-Ton Metal Bench Press
Best for: manual sheet metal forming and notching
- Swing
- 12-Inch
- Target Material
- Metal
- Weight
- 225 pounds
You get a multi-purpose manual press rather than a traditional rotary drill. It delivers a 3-inch stroke and a 12-inch throat depth across a 225-pound welded steel frame. The unit performs louver pressing, press brake bending, and corner notching on sheet metal. A wheeled floor stand and slug ejector come standard. This suits you if you need compact, manual metal forming and punching without dedicated power hookups.
Pros
- Up to a 3-inch stroke with a 12-inch throat depth
- Heavy 225-pound welded steel structure reduces flexing
- Includes a wheeled floor stand for convenient shop mobility
- Comes equipped with a slug ejector
Cons
- Functions as a manual press rather than a motorized rotary drill press
- Tooling for hole-punching, flaring, and shearing must be purchased separately
Good fit if
- You need a manual machine to form louvers, notch corners, and bend sheet metal
- You want a dedicated metal press mounted on a rolling stand
- You work with metal pieces requiring up to a 3-inch stroke
Skip if
- You need a powered spindle for standard rotary drilling tasks
- You expect ready-to-use punch and flare tooling included out of the box
Verdict: Baileigh 3-Ton 12-Inch Metal Bench Press delivers rigid manual metal punching, notching, and brake operations on a wheeled steel frame. It serves metal fabrication tasks where you need mechanical pressing rather than conventional hole drilling.
Baileigh 16-Inch Variable-Speed Drill Press
Best for: metal drilling and tapping in 220V workshops
- Motor Power
- 2 HP
- Spindle Speed
- 150 to 3000 rpm
- Hole Capacity
- 1 in
- Swing
- 16 in
- Voltage
- 220V
- Speed Settings
- Variable Speed
This 16-inch drill press runs on a 2 HP motor wired for 220V single-phase power. It features an inverter-driven head that delivers a variable speed range from 150 to 3000 rpm. With a 1-inch drilling capacity in mild steel and a 5/8-inch auto-reversing tap feature, it suits metalworkers who need a compact swing matched with industrial drilling power and an integrated coolant system.
Pros
- 2 HP motor with 150 to 3000 rpm variable speed range
- 1-inch drilling capacity in mild steel and 5/8-inch auto-reversing tap
- Comes with a built-in two-gallon coolant system
- Rigid cast iron base and work table construction
Cons
- Requires a 220V power supply instead of standard 110V
- 16-inch swing offers less throat depth than 20-inch or 22-inch options
- Heavy footprint weighing 486 pounds
Good fit if
- You have access to a 220V single-phase power outlet.
- You frequently tap threads up to 5/8-inch in steel.
- You want an integrated coolant system and variable-speed control.
Skip if
- You only have standard 110V power available in your shop.
- You need a throat capacity larger than a 16-inch swing can accommodate.
- You need a portable benchtop drill that can be easily moved.
Verdict: Baileigh 16-Inch Variable-Speed Drill Press delivers heavy-duty metalworking capability with its 2 HP motor, auto-reversing tap, and built-in coolant system. It is a solid choice when you need industrial drilling specs in a 16-inch swing format.
Baileigh 22-Inch High-Speed Drill Press
Best for: high-speed drilling and heavy-duty metal tapping
- Spindle Speed
- 100 to 4000 rpm
- Hole Capacity
- 1.25 in
- Swing
- 22 in
- Chuck Capacity
- #4 Morse taper
- Voltage
- 220V
- Weight
- 865 pounds
The Baileigh 22-Inch High-Speed Drill Press provides heavy-duty metalworking capability with a 22-inch swing and an inverter-driven spindle ranging from 100 to 4000 rpm. It drills up to 1.25 inches in mild steel, includes an auto-reversing tapping cycle up to 0.75 inches, and mounts tooling via a #4 Morse taper. This machine suits your workshop if you require broad speed control, tapping functionality, and rigid production drilling for thick steel stock.
Pros
- Continuous variable-speed range from 100 to 4000 rpm driven by a Delta inverter
- Drilling capacity of up to 1.25 inches in mild steel with a #4 Morse taper spindle
- Auto-reversing tapping capability rated for up to 0.75 inches in mild steel
- Machined table includes 0.625-inch T-slots and an integrated halogen work light
Cons
- Requires a 220V power connection rather than standard 110V shop power
- Weight of 865 pounds requires dedicated equipment to position and install
Good fit if
- You need spindle speeds reaching up to 4000 rpm for varied tooling requirements.
- You regularly tap threads up to 0.75 inches in mild steel.
- You have a dedicated 220V single-phase electrical supply in your shop.
Skip if
- You only have access to standard 110V workshop circuits.
- You need a lightweight machine that can be easily relocated.
Verdict: Baileigh 22-Inch High-Speed Drill Press pairs a wide 100 to 4000 rpm inverter drive with tapping capabilities and a 1.25-inch capacity for heavy metal fabrication. Its 865-pound frame and #4 Morse taper make it a dedicated production workhorse where 220V power is available.
Baileigh 21-Inch Variable-Speed Drill Press
Best for: Heavy metal fabrication and production tapping cycles
- Motor Power
- 2 HP
- Spindle Speed
- 65 to 2000 rpm
- Swing
- 21 in
- Voltage
- 220V
- Speed Settings
- Variable Speed
- Dimensions
- 30.3 × 26.5 × 71.4 inches
This floor-standing machine pairs a 21-inch swing with a 2 HP motor wired for 220V single-phase power. It delivers variable spindle speeds from 65 to 2000 rpm managed via a potentiometer dial and digital display. An integrated auto-reversing tapping cycle and automated power downfeed handle production tasks. It suits fabrication shops that need broad drilling capacity and dedicated tapping without stepping up to a radial arm setup.
Pros
- Wide speed range from 65 to 2000 rpm with a digital readout
- Auto-reversing tapping cycle with a 0.937-inch capacity
- Includes automated power downfeed and an integrated coolant system
- Large 22 by 18.5-inch table with 0.625-inch T-slots
- Automatic tool ejector simplifies spindle tooling changes
Cons
- Heavy 902-pound footprint requires dedicated machinery to position
- Requires a 220V single-phase power connection rather than standard 110V
- Top spindle speed caps at 2000 rpm
Good fit if
- You run frequent threading operations requiring an auto-reversing tapping cycle up to 0.937 inches.
- You have a 220V power supply and floor space for a 902-pound machine.
- You need power downfeed and flood coolant for deep production hole drilling.
Skip if
- You only have standard 110V wall outlets available in your workshop.
- You regularly drill small-diameter holes that need spindle speeds above 2000 rpm.
- You require a portable or benchtop unit that can be easily repositioned.
Verdict: Baileigh 21-Inch Variable-Speed Drill Press delivers heavy-duty production drilling with its 2 HP motor, power downfeed, and integrated tapping cycle. Its 902-pound build and 220V requirement make it a dedicated fixture for serious metalworking facilities.
Baileigh 2 HP Inverter Drill Press with Power Feed
Best for: automated metal drilling and tapping operations
- Motor Power
- 2 hp
- Spindle Speed
- 65 to 2000 rpm
- Hole Capacity
- 1.5” steel, 1.75” cast iron
- Voltage
- 220V
- Features
- Automatic Feed
- Dimensions
- 88 × 60 × 44 inches
View on Amazon: Baileigh 2 HP Inverter Drill Press with Power Feed
This heavy-duty machine pairs a 2 hp motor running on 220-volt single-phase power with an inverter drive and a three-speed power down feed. You get variable spindle speeds from 65 to 2000 rpm controlled by a potentiometer dial. With drilling capacities up to 1.5 inches in steel and 1.75 inches in cast iron, plus auto-reversing tapping, it suits production shops running repetitive, thick metal operations.
Pros
- Three-speed power down feed provides automated drilling cycles
- Variable speed range from 65 to 2000 rpm controlled by potentiometer dial
- Handles up to 1.5-inch steel and 1.75-inch cast iron drilling
- Built-in auto-reversing tapping feature rated up to 0.937 inches
Cons
- Weighs 990 pounds, requiring heavy equipment to position
- Requires a 220V power supply rather than a standard 110V circuit
- Large footprint spanning 88 inches long by 60 inches wide
Good fit if
- You need automatic feed control for heavy, repetitive hole making.
- You regularly drill holes up to 1.5 inches in steel or 1.75 inches in cast iron.
- You require an auto-reversing tapping feature for up to 0.937-inch threads.
Skip if
- You only have standard 110V or 115V power outlets available.
- You do not have the floor space or equipment to handle a 990-pound unit.
Verdict: Baileigh 2 HP Inverter Drill Press with Power Feed delivers industrial power feed automation and precise speed control for thick steel drilling. It gives heavy fabrication shops production-grade capacity without requiring a three-phase electrical supply.
Baileigh 5.25 HP Variable-Speed Radial Drill Press
Best for: Heavy-duty 2-inch industrial metal drilling
- Motor Power
- 5.25HP
- Spindle Speed
- 38 - 2000 Rpm
- Hole Capacity
- 2 In.
- Chuck Capacity
- MT5
- Voltage
- 220V
- Speed Settings
- Variable Speed
View on Amazon: Baileigh 5.25 HP Variable-Speed Radial Drill Press
This radial drill press delivers heavy industrial capacity with a 5.25 HP motor running on 220V three-phase power. It provides an infinitely variable spindle speed range from 38 to 2000 RPM and features a heavy-duty MT5 spindle taper. With the ability to drill up to 2 inches in mild steel, it suits metalworking shops handling oversized workpieces that require high drilling power and flexible cutting speeds.
Pros
- 5.25 HP motor handles heavy drilling loads
- 2-inch mild steel drilling capacity
- MT5 spindle taper supports large industrial tooling
- Infinitely variable speed range from 38 to 2000 RPM
Cons
- Requires 220V 3-phase electrical service
- Large 103-inch by 103-inch footprint demands dedicated shop space
Good fit if
- You have access to 220V 3-phase power in your workshop
- You need to bore up to 2-inch holes in mild steel
- You require an MT5 spindle taper for heavy tooling
Skip if
- You only have standard single-phase 110V or 220V electrical supply
- You have limited floor space for a 103-inch wide machine
Verdict: Baileigh 5.25 HP Variable-Speed Radial Drill Press offers heavy-duty 2-inch steel drilling capacity and wide variable speeds for large-scale fabrication facilities. Its 3-phase power requirement and oversized footprint make it strictly an industrial machine.
Baileigh 20-Ton Pneumatic Shop Press
Best for: pneumatic pressing and bearing removal tasks
- Dimensions
- 28 × 66.5 × 10.4 inches
The Baileigh 20-Ton Pneumatic Shop Press delivers 20 tons of pressing force using a pneumatic system equipped with an integrated pressure regulator and gauge. It provides a 19.25-inch working width, an adjustable table, and a 7.5-inch cylinder stroke for pressing, bending, or bushing removal. This unit suits you if you need dedicated pneumatic pressing capacity alongside your metalworking machinery rather than rotary drilling.
Pros
- Delivers 20 tons of pneumatic pressing force
- 7.5-inch cylinder stroke and 19.25-inch working width
- Adjustable table and electro-welded steel frame
- Includes pressure regulator, gauge, and V-block set
Cons
- Functions strictly as a press with no drilling capability
- Stroke travel is limited to 7.5 inches
- Working width tops out at 19.25 inches
Good fit if
- You need 20 tons of pneumatic force for pressing operations.
- You require an adjustable table with a 19.25-inch working width.
- You want an included pressure regulator, gauge, and V-block set.
Skip if
- You need a machine designed for drilling holes.
- You require more than 7.5 inches of cylinder stroke.
- You need pressing capacity exceeding 20 tons.
Verdict: Baileigh 20-Ton Pneumatic Shop Press delivers controlled 20-ton pneumatic force with an adjustable table and a 7.5-inch stroke. It is built for pressing, bending, and assembly tasks rather than hole making.
Baileigh DP-1000E 115V Belt-Drive Drill Press
Best for: 1-inch metal drilling on standard 115V power
- Motor Power
- 0.5 hp
- Spindle Speed
- 5 speeds, 250 to 2900 rpm
- Hole Capacity
- 1”
- Voltage
- 115V / 110 volt
- Target Material
- Metal
- Dimensions
- 69 × 44 × 22 inches
View on Amazon: Baileigh DP-1000E 115V Belt-Drive Drill Press
This belt-driven machine runs on standard 110-volt or 115-volt power, making it easy to plug in at most workstations. It features a 0.5 hp motor and five step-pulley speeds ranging from 250 to 2900 rpm. With a 1-inch drilling capacity in mild steel, a heavy 3-1/8-inch steel column, and a rigid cast-iron base, you get a solid platform designed specifically for metalworking tasks.
Pros
- Drills up to 1-inch capacity in mild steel
- Five selectable spindle speeds from 250 to 2900 rpm
- Heavy 3-1/8-inch steel column with cast iron base and table
- Runs on standard 110V/115V electrical power
Cons
- Manual feed only rather than power feed
- Requires manual belt changes between 5 fixed speeds
- Substantial 370-pound overall weight
Good fit if
- You need 1-inch hole capacity in steel while running on a standard 110V circuit.
- You prefer a heavy 370-pound cast-iron and steel build to minimize flexing.
- You want a speed range between 250 and 2900 rpm for metal drilling.
Skip if
- You require an automatic power feed mechanism for continuous drilling.
- You need a variable-speed dial without manual belt adjustments.
- You want a lightweight machine that is easy to move by yourself.
Verdict: Baileigh DP-1000E 115V Belt-Drive Drill Press gives you rigid cast-iron stability and 1-inch metal capacity on a standard 110-volt outlet. It is a practical, five-speed manual machine built for dependable shop drilling.
Baileigh 14-Inch 5-Speed Benchtop Drill Press
Best for: compact shops needing 110V stepped-speed bench drilling
- Motor Power
- 1/2 hp
- Spindle Speed
- 5 Speed, 250 to 2900 rpm
- Hole Capacity
- 5/8”
- Swing
- 14"
- Chuck Capacity
- B-16 Spindle
- Voltage
- 110V
View on Amazon: Baileigh 14-Inch 5-Speed Benchtop Drill Press
The Baileigh 14-Inch 5-Speed Benchtop Drill Press gives you a compact metal-drilling setup running on standard 110-volt shop power. Driven by a 1/2 hp belt-driven motor, it provides five stepped spindle speeds ranging from 250 to 2900 rpm. With a 14-inch swing, a 2-3/4-inch steel column, and a 5/8-inch drilling capacity in steel, it suits your bench if you need steady, controlled drilling without requiring heavy-duty electrical hookups.
Pros
- 5-speed range spanning from 250 to 2900 rpm
- Maximum drilling capacity of 5/8-inch in steel
- 2-3/4-inch wide steel column minimizes flex
- Screw-type column mechanism for adjusting table and head position
- Operates on standard 110-volt outlets
Cons
- Stepped belt changes required instead of variable-speed adjustment
- 1/2 hp motor provides less power than larger industrial models
Good fit if
- You need a dedicated benchtop machine that plugs into a standard 110V circuit.
- You work with metal up to 5/8-inch capacity and want speeds as low as 250 rpm.
- You prefer mechanical screw-type column adjustments for head and table height.
Skip if
- You want electronic variable speed without manual belt adjustments.
- You require motor power greater than 1/2 hp for heavy-duty fabrication.
Verdict: Baileigh 14-Inch 5-Speed Benchtop Drill Press delivers dependable 110V metal drilling with five stepped speeds and a rigid 2-3/4-inch steel column.
Specifications side by side
| Spec | Baileigh 2 HP Gear-Driven Mill and Drill | Baileigh 100-Ton Pneumatic H-Frame Shop Press | Baileigh 20-Inch Gear-Driven Drill Press | Baileigh 22-Inch Variable-Speed Drill Press | Baileigh 14-Inch Belt Drive Drill Press | Baileigh 12-Inch 3-Ton Metal Bench Press | Baileigh 16-Inch Variable-Speed Drill Press | Baileigh 22-Inch High-Speed Drill Press | Baileigh 21-Inch Variable-Speed Drill Press | Baileigh 2 HP Inverter Drill Press with Power Feed | Baileigh 5.25 HP Variable-Speed Radial Drill Press | Baileigh 20-Ton Pneumatic Shop Press | Baileigh DP-1000E 115V Belt-Drive Drill Press | Baileigh 14-Inch 5-Speed Benchtop Drill Press |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Power | 2 hp | not specified | 1-1/2 HP | 2 HP | 1/2-hp | not specified | 2 HP | not specified | 2 HP | 2 hp | 5.25HP | not specified | 0.5 hp | 1/2 hp |
| Spindle Speed | 90, 210, 345, 670, 1180, 1970 rpm | not specified | 125, 420, 535, and 1740 RPM | 85 to 2000 RPM | Five speeds, 250 to 2900 RPM | not specified | 150 to 3000 rpm | 100 to 4000 rpm | 65 to 2000 rpm | 65 to 2000 rpm | 38 - 2000 Rpm | not specified | 5 speeds, 250 to 2900 rpm | 5 Speed, 250 to 2900 rpm |
| Hole Capacity | 1.5” | not specified | not specified | 1.25″ | 5/8" | not specified | 1 in | 1.25 in | not specified | 1.5” steel, 1.75” cast iron | 2 In. | not specified | 1” | 5/8” |
| Swing | not specified | not specified | 20 in | 20.8″ | 14-Inch | not specified | 16 in | 22 in | 21 in | not specified | not specified | not specified | not specified | 14" |
| Chuck Capacity | R8 Spindle | not specified | not specified | not specified | not specified | not specified | not specified | #4 Morse taper | not specified | not specified | MT5 | not specified | not specified | B-16 Spindle |
| Voltage | 110V | not specified | 110V | 220 V | 115V | not specified | 220V | 220V | 220V | 220V | 220V | not specified | 115V / 110 volt | 110V |
| Speed Settings | not specified | not specified | not specified | Variable Speed | not specified | not specified | Variable Speed | not specified | Variable Speed | not specified | Variable Speed | not specified | not specified | 5-Speed |
| Features | Work Light | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Automatic Feed | not specified | not specified | not specified | not specified |
| Target Material | not specified | not specified | not specified | not specified | not specified | Metal | not specified | not specified | not specified | not specified | not specified | not specified | Metal | not specified |
| Spindle Taper | R8 | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Weight | not specified | 1700 pounds | 484 pounds | not specified | 211 pounds | 225 pounds | 486 pounds | 865 pounds | 902 pounds | 990 pounds | not specified | not specified | 370 pounds | not specified |
| Dimensions | not specified | not specified | 28.2 × 19.7 × 67.3 inches | 60 × 44 × 79 inches | 29 × 28 × 67 inches | not specified | 83 × 60 × 44 inches | not specified | 30.3 × 26.5 × 71.4 inches | 88 × 60 × 44 inches | 103 × 103 × 46 inches | 28 × 66.5 × 10.4 inches | 69 × 44 × 22 inches | not specified |
| Color | Standard | Blue | Blue and White | Silver/Blue | Blue | White and Blue | Blue | Blue | Blue and Black | Standard | White/Blue | Blue | Standard | Standard |
| Model | 1020692 | 1004759 | DP-1000G | BA9-1227902 | DP-0625E | 1000792 | DP-1000VS | DP-1250VS-HS | 1002923 | 1002923 | BA9-1019843 | 1004808 | 1022128 | 1228211 |
| Size | not specified | 100 Ton | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | .03" - .625" |
The Baileigh Drill Press Lineup
Baileigh divides its machinery primarily by drive type, power supply, and machine footprint. Everyday fabrication shops relying on standard 110V or 115V circuits can choose stepped-speed belt units like the Baileigh 14-Inch 5-Speed Benchtop Drill Press or step up to the Baileigh 20-Inch Gear-Driven Drill Press for low-RPM torque. Compact footprints suit smaller work areas where basic metal drilling takes priority over industrial power feeds.
Demanding metalworking operations needing heavy spindle support and rapid adjustments benefit from dedicated 220V variable-speed models. Floor-standing machines like the Baileigh 16-Inch Variable-Speed Drill Press and the Baileigh 2 HP Inverter Drill Press with Power Feed provide automated feed mechanisms, 2 HP motors, and wide speed ranges suited for repetitive tapping and production work.
Who the Baileigh Range Suits
Baileigh designs its machinery for metal fabrication shops needing substantial mass and capacity. Physical machine shapes range from 14-inch benchtop and floor-standing columns to heavy H-frame shop presses and a massive radial arm model measuring 103 inches long. Lighting options are limited across the lineup, with an integrated work light included only on the gear-driven mill and drill.
You should note several distinct gaps. The lineup does not include compact, sub-14-inch hobby drill presses, portable magnetic drills, or lightweight jobsite models. Built-in laser alignment guides and digital stroke scales are also absent from the published specifications.
If you need handheld portability instead of stationary machinery, compare specifications for the best drill drivers with drill driver options.
How to Choose the Right Baileigh Machine
-
Match Available Shop Voltage
Check your workshop electrical service before selecting a machine. Baileigh offers models running on standard 110V or 115V single-phase outlets, which suit smaller spaces without dedicated lines. High-output metalworking production often demands 220V power to support higher horsepower motors and continuous duty cycles. For example, the Baileigh 16-Inch Variable-Speed Drill Press relies on a 220V circuit to run its 2 HP motor. Larger fabrication plants may require 3-phase machinery for industrial-capacity drilling. Choosing the correct voltage upfront prevents expensive shop rewiring or machine motor incompatibility.
-
Evaluate Machine Throat Swing
Swing determines the maximum width of material you can drill to the center. Calculate this by doubling the distance from the spindle center to the column face. A 14-inch swing allows you to center-drill a 14-inch diameter workpiece. If you handle broad plates, look at larger machines. The Baileigh 20-Inch Gear-Driven Drill Press provides extra clearance to handle wide stock without interference from the column. Ensure the throat depth accommodates your most frequent sheet or bar sizes so you do not run out of practical travel.
-
Select Drive Mechanism Types
Baileigh equipment features belt-driven, gear-driven, or variable-speed inverter drives. Belt drives use manual pulley steps, offering simple mechanical maintenance for standard holemaking. Gear-driven heads transfer positive motor torque directly into the spindle without belt slippage, which is critical for turning large bits through thick alloy stock. Variable-speed drives let you fine-tune RPM quickly via controls without moving belts. If you need rigid torque transmission for heavy metal drilling on standard wall power, a gear-driven head ensures the spindle does not stall under heavy thrust loads.
-
Assess Automatic Downfeed Options
Determine whether you need manual quill levers or mechanical power feed. Manual downfeed requires continuous operator effort and manual feed rate control, which works well for low-volume holemaking. Heavy production drilling benefits significantly from automated spindle advance. The Baileigh 2 HP Inverter Drill Press with Power Feed drives the bit through tough metal at a constant, preset mechanical rate. This feature ensures uniform chip load, minimizes operator fatigue during deep-hole drilling, and extends cutter life by maintaining consistent engagement throughout production cycles.
-
Check Production Tapping Cycles
If your fabrication process includes threading pre-drilled holes, examine whether the machine supports integrated tapping. Standard drill presses only turn in a forward direction, requiring separate manual hand-tapping or specialized external attachments. Dedicated metalworking units include automatic spindle-reversing cycles triggered by depth stops or foot pedals. This allows the spindle to drive the tap to depth and instantly reverse out cleanly. Confirm the presence of a dedicated tapping mode if you want to avoid moving workpieces between separate drilling and threading stations.
-
Plan for Floor Weight Capacity
Review machine mass and footprint specifications to ensure your shop floor can support the tool. Lighter benchtop models weigh under 100 pounds, while industrial production drill presses and shop presses can easily exceed hundreds or thousands of pounds. For instance, the Baileigh 21-Inch Variable-Speed Drill Press weighs 902 pounds, demanding a solid, level concrete floor to prevent vibration and ensure operator safety. Verify that your delivery area, shop access doors, and moving equipment like engine hoists or pallet jacks can handle the overall load.
Frequently asked questions
What is the difference between Baileigh gear-driven and belt-drive drill presses?
Gear-driven models deliver positive mechanical torque directly through internal gears, preventing slip during heavy drilling tasks. Belt-driven models, such as the DP-0625E and DP-1000E, use pulleys and belts to transfer motor rotation. Stepping between pulleys changes speeds manually, which offers quiet operation and standard maintenance for general shop drilling. Gear drives eliminate belt changes and provide higher low-end torque.
Which Baileigh models operate on standard 110-volt or 115-volt power?
Several Baileigh drilling machines plug into common 110V or 115V lines. These include the 2 HP Gear-Driven Mill and Drill, the DP-1000G 20-inch gear-driven model, the DP-0625E 14-inch belt-drive press, the DP-1000E, and the 14-inch 5-speed benchtop model (1228211). These tools allow you to perform heavy metal fabrication without installing dedicated high-voltage industrial circuits in your workshop.
What spindle taper does the Baileigh mill and drill model use?
The Baileigh 2 HP Gear-Driven Mill and Drill (model 1020692) features an R8 spindle taper. An R8 taper accepts industry-standard collets, end mill holders, and drill chuck arbors commonly found in metalworking environments. This setup allows you to switch between standard drilling tooling and milling cutters easily on the machine's dedicated milling table.
Which Baileigh drill press features an automatic power downfeed?
The Baileigh 2 HP Inverter Drill Press (model 1002923) includes an automatic power downfeed mechanism. This industrial feed system drives the spindle downward at a controlled, automated pace, reducing operator fatigue during repetitive or thick metal drilling operations. Running on 220-volt power, this 990-pound machine also features variable speed controls to handle production-scale manufacturing tasks.
What is the largest Baileigh drill press in this lineup?
The Baileigh 5.25 HP Variable-Speed Radial Drill Press (model BA9-1019843) is the largest drilling machine listed. It delivers 5.25 horsepower and measures 103 inches long by 103 inches wide. This oversized industrial unit is designed for heavy-duty production facilities requiring variable spindle speeds and large workpiece clearance for industrial metal drilling.
Why does Baileigh include H-frame and bench presses alongside drill presses?
Baileigh manufactures presses for metal forming, broaching, bending, and bearing removal rather than hole cutting. For example, the 100-Ton Pneumatic H-Frame Shop Press handles industrial pressing loads up to 1,700 pounds of frame weight, while the 12-inch 3-ton bench model handles sheet metal notching. They share workshop space with drill presses to support complete metal fabrication workflows.
How is swing measured on a Baileigh drill press?
Swing represents twice the distance from the center of the spindle to the front edge of the support column. For example, the Baileigh 20-Inch Gear-Driven Drill Press has a 20-inch swing, meaning the column clearance is 10 inches. This specification dictates the maximum width of a circular or flat workpiece you can drill directly in the center.