DEXSO 1850W 2" Boring Variable Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking at dexso 1850w 2 boring variable alternatives to find a magnetic drill that fits your specific needs. The DEXSO model delivers 2922 lbf of holding force and 1750W of power for heavy structural steel work. Its 2-inch hole capacity and variable speed up to 810 RPM handle hardened alloys well. However, you might prefer a different size, weight, or price point for your projects.
This list compares 6 similar picks that share key specifications with the DEXSO drill. We selected these alternatives because their specs overlap with the original, including magnetic configuration and variable speed settings. Some options offer lower wattage for portability, while others provide different hole capacities for smaller core holes. You can compare motor power, magnetic force, and dimensions to decide which tool suits your fabrication tasks. Each product here meets the basic requirements for industrial or DIY steel drilling without unnecessary extras.
Our top pick: DEXSO 1850W 2" Variable Speed Magnetic Drill.
How these models differ from DEXSO
VEVOR 1450W Variable Speed Magnetic Drill
The VEVOR 1450W model weighs 26.5 pounds, which is significantly lighter than the 36.4-pound DEXSO unit. This makes it easier to carry around job sites. It shares the same 2-inch hole capacity and variable speed settings. However, it has a lower motor wattage at 1450W compared to the DEXSO’s 1750W. You get a more compact footprint with dimensions of 7.1 by 11 inches. The holding force is strong enough for thick steel, but you sacrifice some raw power for portability. This pick suits fabricators who move equipment frequently.
VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
This VEVOR variant limits your hole capacity to 1.6 inches, which is smaller than the 2-inch maximum of the DEXSO drill. It uses a 1450W motor and variable speed control similar to the original. The weight is 26.5 pounds, offering better portability than the heavier DEXSO model. You should choose this if your projects only require smaller core holes in steel. The cutting width is listed as 6 inches, which may limit the size of your cutters. It is a solid choice for steel fabrication tasks that do not demand the largest possible hole diameter.
VEVOR 1550W 2-Inch Magnetic Drill Press
The VEVOR 1550W model is heavier at 39 pounds, making it less portable than the DEXSO drill. It matches the 2-inch hole capacity and variable speed features. The motor wattage is slightly lower at 1550W. This unit is designed for DIY users working on thick steel plates. It provides precise speed control for fabrication tasks. The compact width of 5.1 inches helps in tight spaces. You trade some motor power and increased weight for a budget-friendly option that still handles heavy-duty steel drilling effectively.
VEVOR 1200W Magnetic Drill Press
This VEVOR drill has a reduced hole capacity of 1.6 inches, compared to the 2-inch capacity of the DEXSO. It features a 1200W motor, which is less powerful than the DEXSO’s 1750W unit. The weight is 25.6 pounds, making it much easier to carry. It offers variable speed settings for mild steel work. You should pick this if you prioritize portability and do not need to drill large diameter holes. The compact design fits smaller workspaces. It is ideal for users who focus on smaller diameter holes in mild steel rather than heavy structural fabrication.
iMeshbean 1400W 2-Inch Magnetic Drill Press
The iMeshbean 1400W model weighs 28 pounds, which is lighter than the DEXSO drill. It offers a 2-inch hole capacity and variable speed control. The motor wattage is 1400W, slightly less than the DEXSO’s 1750W. It is built for heavy-duty steel structure drilling. The dimensions are 14.2 by 4.7 inches, offering a different profile than the original. You get reliable performance for metal drilling tasks. This model suits professionals who value magnetic stability and included accessories over maximum speed settings. It is a solid alternative for heavy metal work.
Unibor Low Profile Magnetic Drill Press
The Unibor E5000LP features a low-profile design with a 2-inch hole capacity. It has a 1200W motor, which is less powerful than the DEXSO’s 1750W unit. The model includes a built-in work light, a feature not listed for the DEXSO. It is designed for confined spaces where height is a constraint. The variable speed settings allow for precise control. You should choose this if you need to drill in tight areas. It sacrifices some motor power for a form factor that fits into low-clearance environments. The height specification is listed as 64 inches, which may refer to the total setup height.
Quick picks
Our 7 picks
DEXSO 1850W 2" Variable Speed Magnetic Drill
Best for: heavy-duty structural steel fabrication
- Motor Power
- 1750W
- Spindle Speed
- 810 RPM
- Hole Capacity
- 2"
- Spindle Travel
- 50mm
- Magnetic Force
- 2922Lbf
- Configuration
- Magnetic
View on Amazon: DEXSO 1850W 2" Variable Speed Magnetic Drill
The DEXSO magnetic drill press features a 1850W motor and 2922 lbf magnetic force. It drills up to 2-inch holes at variable speeds reaching 810 RPM. The unit weighs 36.4 pounds and includes a 50 mm spindle travel. This setup suits professionals needing high torque for hardened steel. You get precision with an integrated millimeter scale and durable titanium-magnesium guide rails for industrial use.
Pros
- 1850W motor delivers high torque for hardened steels
- 2922 lbf magnetic base ensures secure attachment
- Variable speed control reaches 810 RPM
- Integrated millimeter scale aids precise hole placement
Cons
- 36.4 pound weight makes transport difficult
- 50 mm spindle travel limits deep hole capacity
- No remote control or digital display listed
Good fit if
- You need high magnetic force for vertical steel work
- You drill large diameter holes in structural steel
- You require variable speed for different materials
Skip if
- You need deep hole drilling beyond 50 mm
- You prefer a lightweight tool for overhead use
- You require digital speed readouts or remote control
Verdict: DEXSO 1850W 2" Variable Speed Magnetic Drill offers strong holding power and high torque for heavy fabrication. It fits industrial users who prioritize magnetic stability and precision over portability.
VEVOR 1450W Variable Speed Magnetic Drill
Best for: Thick steel fabrication requiring precise depth control
- Motor Power
- 1450W
- Spindle Speed
- 0-750 RPM
- Hole Capacity
- 2" / 50 mm
- Spindle Travel
- 2" / 50 mm
- Magnetic Force
- 2922 lbf / 13,000 N
- Configuration
- Magnetic
This VEVOR magnetic drill press features a 1450W motor and delivers 2922 lbf of holding force. It offers variable speed control from 0 to 750 RPM with a 2-inch core drilling capacity. The unit includes a built-in scale for precise measurement and a titanium-magnesium alloy guide rail. It is designed for portable use on steel plates at least 10 mm thick.
Pros
- 1450W copper motor provides stable performance
- 2922 lbf holding force ensures secure operation
- Built-in scale aids precise distance measurement
- Titanium-magnesium alloy guide rail resists wear
Cons
- 1450W motor is less powerful than the 1850W and 1550W competitors
- Not suitable for stainless steel or cast iron
- Requires steel plates at least 10 mm thick
Good fit if
- You need high holding force for vertical or inverted drilling
- You require precise depth measurement via the built-in scale
- You work on thick steel plates in fabrication or construction
Skip if
- You need to drill stainless steel or cast iron
- You require a motor more powerful than 1450W
- You are drilling on steel thinner than 10 mm
Verdict: The VEVOR 1450W 2" Magnetic Drill offers strong holding force and precise measurement for thick steel. It suits fabricators who prioritize stability over maximum motor power.
VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
Best for: steel fabrication with smaller core holes
- Motor Power
- 1450W
- Spindle Speed
- 0-800 RPM (10-speed)
- Hole Capacity
- 1.6 in (40 mm)
- Spindle Travel
- 2 in / 50 mm
- Magnetic Force
- 2810 lbf / 12500 N
- Configuration
- Magnetic
View on Amazon: VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
This VEVOR magnetic drill press features a 1450W motor and generates 2810 lbf of holding force. It drills up to 1.6 inches in diameter with a 2-inch coring depth. The unit offers variable speed control from 0 to 800 RPM across 10 settings. It weighs 26.5 pounds and includes a scale for precise depth measurement. You should use this tool for steel fabrication where stable, angled drilling is required.
Pros
- 1450W copper motor provides strong drilling power
- 2810 lbf magnetic force anchors securely at any angle
- 10-speed variable settings allow precise RPM control
- Built-in scale helps pinpoint drill bit distance
Cons
- 1.6 inch hole capacity is smaller than the 2 inch standard on this list
- Not suitable for stainless steel or cast iron
- Requires steel plate thickness of at least 0.39 inch
Good fit if
- You need a portable drill for structural steel work
- You require stable drilling on vertical or inverted surfaces
- You prefer a 1.6 inch boring diameter for smaller cores
Skip if
- You need to drill holes larger than 1.6 inches
- You frequently work with stainless steel or cast iron
- You require drilling in plates thinner than 0.39 inch
Verdict: VEVOR 1450W 1.6 in Mag Drill offers solid holding power for steel fabrication but limits you to smaller hole sizes than the other picks on this list.
VEVOR 1550W 2-Inch Magnetic Drill Press
Best for: DIY steel fabrication on thick plates
- Motor Power
- 1550W
- Spindle Speed
- 0-550 RPM
- Hole Capacity
- 2" / 50 mm
- Spindle Travel
- 2" / 50 mm
- Magnetic Force
- 2922 lbf / 13,000 N
- Configuration
- Magnetic
The VEVOR 1550W magnetic drill press offers 2-inch core drilling capacity with 2922 lbf holding force. It features variable speed control from 0-550 RPM and a 2-inch spindle travel. The unit weighs 39 pounds and includes overload protection. It suits DIY users needing portable steel fabrication tools for plates at least 0.39 inches thick.
Pros
- 1550W motor provides stable performance
- 2922 lbf magnetic holding force
- Variable speed from 0-550 RPM
- Built-in measurement scale for accuracy
Cons
- Not suitable for stainless steel or cast iron
- Requires steel plates at least 0.39 inches thick
- Security rope needed for inverted drilling
Good fit if
- You need variable speed for different hole diameters
- You work on steel plates 0.39 inches or thicker
- You require high holding force for stable drilling
Skip if
- You drill stainless steel or cast iron
- You work on steel thinner than 0.39 inches
- You need a non-portable stationary unit
Verdict: VEVOR 1550W 2" Magnetic Drill fits DIYers who need portable, high-force drilling on thick steel plates. It delivers precise variable speed control for fabrication tasks.
VEVOR 1200W Magnetic Drill Press
Best for: smaller diameter holes in mild steel
- Motor Power
- 1200W
- Spindle Speed
- 0-850 RPM, 10-speed
- Hole Capacity
- 1.6 in (40 mm)
- Spindle Travel
- 2 in (50 mm)
- Magnetic Force
- 2810 lbf (12500 N)
- Configuration
- Magnetic
This VEVOR magnetic drill press features a 1200W motor and 2810 lbf holding force. It drills up to 1.6 inches with a 2-inch depth. The 0-850 RPM variable speed offers 10 settings. It includes a millimeter scale for precision. You should use it on steel plates 0.39 inches thick or more. It is not suitable for stainless steel or cast iron.
Pros
- 2810 lbf magnetic holding force
- 1200W copper motor
- 0-850 RPM variable speed
- Millimeter scale on frame
Cons
- 1.6 inch boring diameter is smaller than 2-inch competitors
- Not suitable for stainless steel or cast iron
- Requires steel plate thickness of at least 0.39 inches
Good fit if
- You need a lighter 25.6 pound unit
- You drill holes up to 1.6 inches
- You work on mild steel plates
Skip if
- You require 2 inch boring capacity
- You drill stainless steel
- You drill cast iron
Verdict: VEVOR 1.6 in Magnetic Drill Press offers solid power for smaller holes. It fits users who prioritize portability over maximum diameter.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: Heavy-duty steel structure drilling
- Motor Power
- 1400W
- Spindle Speed
- 0-810 RPM
- Hole Capacity
- 2"
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
This iMeshbean magnetic drill press offers 1400W of power with a 2-inch boring diameter and a magnetic force of 2922 lbf. It features variable speed control from 0 to 810 RPM. The unit weighs 28 pounds and includes six drill bits. It is designed for drilling through rigid metal surfaces in construction or industrial settings. You get a portable solution for steel structures.
Pros
- 1400W motor provides heavy-duty power
- 2922 lbf magnetic force for secure anchoring
- Variable speed range of 0-810 RPM
- Includes six drill bits for various diameters
- Overload protection and cooling system for safety
Cons
- Lower motor power compared to 1850W competitors
- Heavier build at 28 pounds
- No mention of digital speed display
Good fit if
- You need strong magnetic holding force
- You require variable speed for metal drilling
- You work on steel structures or shipbuilding
Skip if
- You need the highest available motor power
- You prefer a lighter portable unit
- You require a digital speed readout
Verdict: iMeshbean 1400W 2" Magnetic Drill delivers reliable performance for heavy metal drilling tasks. It suits professionals who prioritize magnetic stability and included accessories over maximum speed settings.
Unibor Low Profile Magnetic Drill Press
Best for: Low profile drilling in confined spaces
- Motor Power
- 1200W
- Spindle Speed
- Variable speed
- Hole Capacity
- 2"
- Configuration
- Magnetic
- Features
- Work Light
- Design
- Low Profile
The Unibor E5000LP is a low-profile magnetic drill press designed for confined spaces. It features a 1200W motor and a 2-inch hole capacity. The variable speed spindle allows for precise control during core drilling or countersinking. A built-in work light improves visibility in dark areas. This unit suits users needing a compact footprint for right-angle drilling or spot weld cutting tasks.
Pros
- 1200W motor provides reliable power for core drilling
- 2-inch hole capacity handles standard core bits
- Variable speed settings allow for precise material removal
- Integrated work light enhances visibility in low light
- Low profile design fits into tight spaces
Cons
- Lower 1200W motor power compared to 1450W+ competitors
- Larger physical footprint with 16-inch width
- No digital speed display for precise RPM monitoring
Good fit if
- You need a magnetic drill for tight spaces
- You require a 2-inch drilling capacity
- You work in low-light conditions
Skip if
- You need more than 1200W of motor power
- You require a digital speed display
- You need a compact unit under 16 inches wide
Verdict: Unibor E5000LP Low Profile Mag Drill offers a 2-inch capacity and 1200W motor for confined spaces. It suits users who prioritize a low profile and built-in lighting over higher wattage or digital displays.
Specifications side by side
| Spec | DEXSO 1850W 2" Variable Speed Magnetic Drill | VEVOR 1450W Variable Speed Magnetic Drill | VEVOR 1.6-Inch Variable Speed Magnetic Drill Press | VEVOR 1550W 2-Inch Magnetic Drill Press | VEVOR 1200W Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press | Unibor Low Profile Magnetic Drill Press |
|---|---|---|---|---|---|---|---|
| Motor Power | 1750W | 1450W | 1450W | 1550W | 1200W | 1400W | 1200W |
| Spindle Speed | 810 RPM | 0-750 RPM | 0-800 RPM (10-speed) | 0-550 RPM | 0-850 RPM, 10-speed | 0-810 RPM | Variable speed |
| Hole Capacity | 2" | 2" / 50 mm | 1.6 in (40 mm) | 2" / 50 mm | 1.6 in (40 mm) | 2" | 2" |
| Spindle Travel | 50mm | 2" / 50 mm | 2 in / 50 mm | 2" / 50 mm | 2 in (50 mm) | not specified | not specified |
| Magnetic Force | 2922Lbf | 2922 lbf / 13,000 N | 2810 lbf / 12500 N | 2922 lbf / 13,000 N | 2810 lbf (12500 N) | 2922lbf / 13000N | not specified |
| Configuration | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic |
| Speed Settings | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed | Variable Speed |
| Features | not specified | not specified | not specified | not specified | not specified | not specified | Work Light |
| Motor Wattage | not specified | not specified | not specified | 1550W | 1200W | not specified | 1200W |
| Target Material | Metal, Plastic | Metal | Metal | Metal | Metal | Metal | not specified |
| Design | Portable | Portable | Portable | Portable | not specified | not specified | Low Profile |
| Intended Use | not specified | not specified | not specified | DIY | not specified | not specified | not specified |
| Cutting Width | not specified | not specified | 6-Inch | not specified | 6-Inch | not specified | not specified |
| Dimensions | 20.9 × 5.91 × 17.1 inches | 11 × 7.1 × 14.2 inches | 11 × 7.3 × 14.2 inches | 14.2 × 5.1 × 17.3 inches | 11.4 × 8.3 × 15 inches | 4.7 × 14.2 × 10.6 inches | 32 × 16 × 64 inches |
| Weight | 36.4 pounds | 26.5 pounds | 26.5 pounds | 39 pounds | 25.6 pounds | 28 pounds | not specified |
| Model | xOXdtY06GprHsdg47y8xnwijC1y | 8880E | ZT-45H | MD-50A | ZT-40HAR | WF21456 | ELP5000 |
| Size | not specified | W/ 2 in 6 pieces - Tapping (NEW) | 1.6 in 2PCS | (W/ 2" - (NEW)) | 1.6 in (2 Bits) | not specified | ELP5000/1 |
| Color | not specified | Orange W/ 2" 6pcs | Orange | Orange | Yellow | multi | Blue |
Frequently asked questions
Which magnetic drill is best for heavy structural steel fabrication?
The DEXSO 1850W model is the top pick for heavy-duty structural steel work. It provides strong holding power and high torque, making it ideal for industrial users who prioritize magnetic stability and precision. While it weighs 36.4 pounds, its variable speed settings and 2-inch capacity handle demanding fabrication tasks effectively.
What is the lightest magnetic drill on this list?
The VEVOR 1200W Magnetic Drill Press is the lightest option at 25.6 pounds. This makes it highly portable for users who need to move equipment frequently. It features variable speed control and is designed for drilling smaller diameter holes in mild steel, offering a balance of power and ease of transport.
Can I use a magnetic drill for DIY projects on thick plates?
Yes, the VEVOR 1550W 2-Inch Magnetic Drill is designed for DIY steel fabrication on thick plates. It delivers precise variable speed control and high-force drilling capabilities. Although it weighs 39 pounds, its portable design and 2-inch capacity make it suitable for hobbyists who need reliable performance on substantial metal workpieces.
Which drill is best for low profile drilling in confined spaces?
The Unibor Low Profile Magnetic Drill Press is the best choice for confined spaces. It features a low profile design and a 2-inch capacity with a 1200W motor. This model suits users who prioritize a compact footprint and built-in lighting over higher wattage or digital displays, ensuring visibility and access in tight areas.
Which magnetic drill offers the best value for thick steel fabrication?
The VEVOR 1450W Variable Speed Magnetic Drill is rated as the best premium option for thick steel fabrication. It offers strong holding force and precise measurement capabilities. Weighing 26.5 pounds, it balances stability with portability, making it suitable for fabricators who need precise depth control without the bulk of heavier industrial models.
Is there a magnetic drill suitable for smaller core holes in steel?
The VEVOR 1.6-Inch Variable Speed Magnetic Drill Press is ideal for steel fabrication with smaller core holes. It offers solid holding power but limits you to smaller hole sizes compared to other picks. This model is perfect for users who prioritize precision in smaller diameter applications over the maximum drilling capacity of larger units.
Which magnetic drill includes a work light for better visibility?
The Unibor Low Profile Magnetic Drill Press includes a built-in work light feature. This is particularly useful for tasks requiring clear visibility in dimly lit or confined spaces. Along with its 1200W motor and 2-inch capacity, the integrated lighting helps you maintain accuracy and safety while drilling into metal surfaces during professional or DIY projects.