Zinnore or Vimke? Drill Presses Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This zinnore vs vimke drill press comparison looks at two portable magnetic drill presses for metalworking. Both units use electromagnetic bases to hold firmly to steel surfaces, making them suitable for vertical or overhead work. The main difference lies in their design and capacity. The Zinnore model focuses on standard twist drilling and tapping with a traditional upright profile. The Vimke option features a low-profile design optimized for annular cutters and larger diameter holes in tight spaces.
Key differences
| Aspect | Zinnore 1150W Magnetic Drill Press | Vimke 1380W Low Profile Magnetic Drill Press |
|---|---|---|
| Motor Power | 1150W | 1380W |
| Hole Capacity | 5/8 in (16 mm) twist drill | 1.4 in (35 mm) core drill |
| Magnetic Force | 2360 lbs (10500N) | 2585 lbs (11500N) |
| Design Profile | Standard Portable | Low Profile |
| Spindle Speed | not listed | up to 680 RPM |
| Additional Function | Tapping (M5-M12) | not listed |
Which one should you choose?
Choose Zinnore 1150W Magnetic Drill Press if
- You need to perform tapping operations alongside drilling
- You prefer a traditional upright design for general fabrication
- You are working with smaller diameter twist drills up to 5/8 inch
Choose Vimke 1380W Low Profile Magnetic Drill Press if
- You require higher magnetic holding force for heavy cuts
- You need to drill larger diameter holes using annular cutters
- You work in confined spaces where a low profile is essential
Verdict: The Zinnore drill press is the better choice if you require tapping capabilities and work primarily with standard twist drills. The Vimke model offers superior power and a low-profile design for larger diameter core drilling tasks. Select the unit that matches your specific hole size requirements and workspace constraints.
Zinnore vs Vimke Mag Drill
Motor Wattage
The Vimke 1380W Low Profile Magnetic Drill Press features a 1380W pure copper motor, while the Zinnore 1150W Magnetic Drill Press is rated at 1150W. Higher wattage generally indicates greater potential torque and sustained performance under heavy loads. The Vimke offers 230W more power, which can help maintain speed when drilling through thicker or harder metals. This difference is significant for industrial applications requiring consistent power delivery. The Zinnore motor is sufficient for many general fabrication tasks but provides less headroom for demanding operations compared to the Vimke unit.
Drilling Capacity
The Vimke supports a maximum core drilling diameter of 1.4 inches (35 mm) and a depth of 1.8 inches (45 mm). The Zinnore supports twist drilling up to 5/8 inch (16 mm) and tapping from M5 to M12. The Vimke handles significantly larger holes, making it better for large-diameter core drilling tasks. The Zinnore includes tapping capability, which the Vimke data does not mention. If you need to drill large holes, the Vimke is the clear choice. If tapping threads is a priority, the Zinnore offers that specific function, though its twist drilling limit is much smaller.
Magnetic Force
Both units rely on electromagnetic bases for stability. The Vimke provides a magnetic force of 11500 N (2585 lbf) using a pure-iron double-coil design. The Zinnore offers 10500 N (2360 lbs) of force. The Vimke exerts approximately 1000 N more holding power. This extra force can provide added security when working on vertical or sloped surfaces. Both bases are designed to keep the drill firmly in place during operation. The Vimke’s stronger magnet may offer a slight safety margin in challenging positioning scenarios, ensuring the tool does not shift during high-torque drilling.
Physical Size
The Vimke has a low profile design with dimensions of 11 inches in length, 3.9 inches in width, and 8.3 inches in height. The Zinnore measures 16.9 inches in length, 8.54 inches in width, and 17.3 inches in height. The Vimke is substantially more compact and fits into tighter, hard-to-reach areas more easily. The Zinnore is larger and heavier, weighing 32.3 pounds compared to the Vimke’s unspecified weight but larger footprint. For work in confined spaces or elevated positions where space is limited, the Vimke’s low profile is a practical advantage.
Speed Settings
The Vimke specifies a spindle speed of up to 680 RPM. The Zinnore data does not list a specific speed setting. Variable speed controls are often useful for different materials and drill bit types. Without a listed speed, it is unclear if the Zinnore offers variable control or a fixed rate. The Vimke’s stated 680 RPM provides a known operating parameter for planning your workflow. If you require precise speed management for specific materials, the Vimke’s published spec offers more clarity than the Zinnore’s unspecified data.
Choose the Right Mag Drill for You
Need large diameter core drilling
The Vimke model handles a maximum core drilling diameter of 1.4 inches. This capacity allows you to cut larger holes efficiently. It also features a spindle travel of 1.8 inches for deeper cuts. The 1380W motor provides the power needed for these demanding tasks on steel or cast iron surfaces.
Require tapping capabilities
The Zinnore unit supports both drilling and tapping functions. It accommodates tapping ranges from M5 to M12. This versatility is useful when you need to create threaded holes directly. The 5/8 inch twist drilling diameter covers standard fastener sizes for most fabrication and installation jobs.
Want high magnetic holding force
The Vimke drill press offers a magnetic force of 2585 lbf. This is slightly higher than the Zinnore's 2360 lbf rating. The stronger pull ensures stability on vertical or sloped metal surfaces. The pure-iron double-coil design with a steel plate thickness over 10mm enhances conductivity and safety during operation.
The products compared
Zinnore 1150W Magnetic Drill Press
Best for: vertical steel fabrication and railway work
- Motor Power
- 1150W
- Hole Capacity
- 5/8 in (16 mm)
- Magnetic Force
- 2360 lbs / 10500N
- Configuration
- Magnetic
- Target Material
- Metal
- Design
- Portable
View on Amazon: Zinnore 1150W Magnetic Drill Press Affiliate link
This Zinnore magnetic drill press features a 1150W motor and 2360 lbs of magnetic force. It drills up to 5/8 inch holes and taps from M5 to M12. The unit weighs 32.3 pounds and measures 16.9 inches long. It suits metal fabrication, shipbuilding, and railway work. You get stable drilling on vertical or sloped surfaces. The design supports both fine and large-scale jobs.
Pros
- 1150W motor provides strong performance for steel fabrication
- 2360 lbs magnetic force ensures stability on vertical surfaces
- Drills up to 5/8 inch diameter in metal
- Supports tapping from M5 to M12
- Titanium-magnesium alloy rails resist corrosion and wear
Cons
- Smaller 5/8 inch hole capacity compared to other options
- Heavier 32.3 pound build limits portability
- Larger footprint may not fit tight spaces
Good fit if
- You need stable drilling on vertical metal surfaces
- You work on shipbuilding or railway projects
- You require both drilling and tapping capabilities
Skip if
- You need to drill holes larger than 5/8 inch
- You require a lighter tool for elevated work
- You need a compact unit for tight spaces
Verdict: Zinnore 1150W Magnetic Drill Press delivers solid magnetic force for vertical metal work. It fits fabricators who need tapping and drilling in steel structures.
Vimke 1380W Low Profile Magnetic Drill Press
Best for: portable large-diameter steel drilling
- Motor Power
- 1380W
- Spindle Speed
- up to 680 RPM
- Hole Capacity
- 1.4 in
- Spindle Travel
- 1.8 in
- Magnetic Force
- 11500 N (2585 lbf)
- Chuck Capacity
- 3/4 in
View on Amazon: Vimke 1380W Low Profile Magnetic Drill Press Affiliate link
This Vimke magnetic drill press features a 1380W motor and a low profile design for tight spaces. It delivers 2585 lbf of magnetic force and drills up to 1.4 inches. The spindle speed reaches 680 RPM with a 1.8-inch travel. It is built for steel and alloys. You will find it useful for industrial or construction tasks where portability matters.
Pros
- 1380W pure copper motor for efficient drilling
- 2585 lbf magnetic force with safety interlock
- Low profile design fits in tight areas
- Drills up to 1.4 inches in diameter
Cons
- Lower spindle speed than benchtop models
- Requires flat steel surface for mounting
- Single fixed speed limits versatility
Good fit if
- You need to drill on vertical steel surfaces
- You work in confined construction spaces
- You drill large holes in thick metal
Skip if
- You require variable speed control
- You drill wood or non-magnetic materials
- You need a stationary benchtop unit
Verdict: Vimke 1380W Low Profile Mag Drill suits field workers drilling large holes in steel. It offers strong holding power for industrial tasks. You should buy it if you need portable magnetic drilling.
Specifications side by side
| Spec | Zinnore 1150W Magnetic Drill Press | Vimke 1380W Low Profile Magnetic Drill Press |
|---|---|---|
| Motor Power | 1150W | 1380W |
| Spindle Speed | not stated | up to 680 RPM |
| Hole Capacity | 5/8 in (16 mm) | 1.4 in |
| Spindle Travel | not stated | 1.8 in |
| Magnetic Force | 2360 lbs / 10500N | 11500 N (2585 lbf) |
| Chuck Capacity | not stated | 3/4 in |
| Configuration | Magnetic | Magnetic |
| Target Material | Metal | not stated |
| Design | Portable | Low Profile |
| Dimensions | 16.9 × 8.54 × 17.3 inches | 11 × 3.9 × 8.3 inches |
| Weight | 32.3 pounds | not stated |
| Model | ZE1612 | WF23824X |
Frequently asked questions
Which magnetic drill press is lighter to carry?
The Zinnore model is the lighter option for transport. It weighs 32.3 pounds. The Vimke unit does not list a weight in its specifications. If portability is your primary concern, the Zinnore unit offers a known weight value. This makes it easier to plan your load for job sites.
What is the difference in physical size between the two?
The Vimke drill press is significantly more compact. It measures 3.9 inches wide and 8.3 inches high. The Zinnore unit is larger, measuring 8.54 inches wide and 17.3 inches high. The Vimke design is labeled as low profile, while the Zinnore is described as portable. Choose Vimke for tight spaces.
Can I use these drills for vertical work?
Yes, both units are designed for vertical applications. They use magnetic bases to secure themselves to steel surfaces. This allows you to drill upward or downward without the tool slipping. The Zinnore verdict specifically mentions vertical steel fabrication, confirming its suitability for this orientation.
Which model has the higher wattage motor?
The Vimke drill press has the higher rated motor. It features a 1380W motor. The Zinnore unit is rated at 1150W. Higher wattage often suggests greater torque potential for heavy loads. If you need sustained power for dense materials, the Vimke specification indicates a more powerful motor.
Are these drills suitable for railway maintenance?
The Zinnore model is explicitly recommended for railway work. Its verdict notes it fits fabricators needing tapping in steel structures. The Vimke model is geared toward portable large-diameter steel drilling. For railway-specific tasks, the Zinnore unit is the designated choice based on its intended use case.
What models are these magnetic drills?
The Zinnore drill press carries the model number ZE1612. The Vimke unit is identified as model WF23824X. These identifiers help you locate manuals or replacement parts. Both are magnetic configurations designed for metal. Knowing the exact model numbers ensures you reference the correct specifications for your needs.
Which drill is better for field workers?
The Vimke model is described as suitable for field workers. It offers strong holding power for industrial tasks. Its low profile design aids portability. The Zinnore unit is also portable but is highlighted for vertical fabrication. If you work in the field and need large diameter drilling, the Vimke is the better fit.