ZELCAN Magnetic Drill Press 6 Review: Specs, Pros and Cons

What stands out

• 1550W copper motor provides robust power for metal drilling tasks
• 3125 lbf magnetic force ensures secure attachment to steel surfaces
• Drills holes up to 2 inches in diameter and depth
• Includes six drill bits for common hole sizes
• 16.9 fl. oz. coolant tank helps manage heat during operation

Who it fits

ZELCAN Magnetic Drill Key Specs

Motor Power: 1550W

This wattage indicates a robust copper motor capable of sustained heavy-duty operation. You get enough torque to drill through thick steel plates without stalling. When comparing magnetic drills, look for motors in the 1500W range for professional fabrication. Lower wattage units may struggle with harder materials or larger diameters, making this spec critical for industrial tasks.

Magnetic Force: 3125 lbf / 13900N

This force rating ensures the drill stays firmly anchored to vertical or overhead steel surfaces. It prevents slipping during high-torque operations, which is essential for safety. Compare this against standard benchtop presses that require clamping. A force over 3000 lbf allows you to work confidently on uneven or angled ferrous materials without manual support.

Hole Capacity: 2"

This spec defines the maximum diameter of holes you can cut in a single pass. It covers most common structural steel requirements for construction and machinery installation. Standard benchtop drills often max out at half an inch. This larger capacity reduces the need for pilot holes or multiple steps, saving time when working with thick metal beams or plates.

Spindle Speed: 650 rpm

This speed is optimized for drilling large holes in metal, providing necessary torque at lower revolutions. It ensures clean cuts without overheating the bit. When shopping, note that higher speeds suit smaller bits, while this lower range handles larger diameters effectively. It allows you to maintain control and precision when boring through dense ferrous materials for structural applications.

Design and Build Overview

The ZELCAN magnetic drill press measures 13 inches in length, 5.51 inches in width, and 15.7 inches in height. It weighs 45.9 pounds. This compact footprint allows you to maneuver the unit into tight spaces on construction sites or in workshops. The blue finish covers a solid iron bottom, which serves as the magnetic base. According to the listing, this base generates 3125 lbf of force, anchoring the tool securely to ferrous surfaces. You can rely on this stability when drilling into steel plates or structural beams.

The layout includes a stepless control knob and a direction switch. You adjust the speed smoothly to match your specific drilling requirements. The reversible switch lets you change rotation direction for various tasks. A 16.9 fl. oz. coolant tank sits on the unit to manage heat during extended use. This efficient cooling system helps preserve precision and prolongs the machine's life. The design prioritizes function, with controls placed for easy access during operation.

You can attach this drill to almost any ferrous surface. It is ideal for shipbuilding, bridge construction, and industrial steel fabrication. The portable design means you can move it between job sites without needing a fixed bench. The included six drill bits cover most common hole sizes. You get a versatile tool for heavy-duty metalwork. The robust build supports sustained operation in demanding environments. You benefit from a machine that balances power with portability.

Setup And Everyday Use Guide

Setting up this ZELCAN magnetic drill press begins with verifying the surface. The unit relies on a 3125 lbf electromagnet anchored by a solid iron bottom. You must place the machine on a flat, ferrous metal surface to activate the magnetic hold. Once the switch is flicked, the drill anchors securely, allowing you to work without additional clamping. The portable design, weighing 45.9 pounds, makes it easy to move between job sites or within a workshop.

For daily operation, you adjust the speed using the stepless control knob. This feature lets you match the drilling speed to the material thickness and bit size. The motor runs at 650 rpm, providing consistent torque for holes up to 2 inches in diameter and depth. You can also reverse the drilling direction using the handy direction switch, which is useful for clearing chips or handling specific threading tasks.

The machine includes a 16.9 fl. oz. coolant tank to manage heat during extended use. This efficient cooling system preserves precision and prolongs the tool's life when boring through steel. The package includes six drill bits, covering most common sizes for immediate use. You can tackle applications in shipbuilding, bridge construction, and industrial fabrication. The blue unit measures 13 inches in length and 15.7 inches in height, fitting comfortably in tight spaces while delivering professional-grade performance for metalworking tasks.

Before You Buy This Mag Drill

This ZELCAN unit is a specialized tool for ferrous metals. It does not replace a standard benchtop drill press for wood or plastic. You must ensure your workpieces are steel or iron. The magnet requires a flat surface to engage the 3125 lbf force. Check that your metal is thick enough to support the drill without bending. You will need cutting fluid for extended use. The 16.9 fl oz tank helps, but you may need to refill it during deep holes. Keep the coolant clean to prevent clogging. This machine fits best in a metal fabrication shop. It complements standard drills by handling large diameter holes in plate steel. If you work on bridges or wind turbines, this portable design suits your needs. Verify your bit sizes match the 2-inch capacity. This tool is an addition to your kit, not a replacement for all drilling tasks.

Check before you buy

• Verify surface is flat ferrous metal
• Check hole diameter under 2 inches
• Ensure adequate cutting fluid supply
• Confirm steel thickness supports drill

The product at a glance

1

ZELCAN 1550W 2-Inch Magnetic Drill Press

Best for: Heavy-duty steel fabrication and large hole drilling

Motor Power

1550W

Spindle Speed

650 rpm

Hole Capacity

2"

Spindle Travel

2"

Magnetic Force

3125 lbf / 13900N

Configuration

Magnetic

View on Amazon: ZELCAN 1550W 2-Inch Magnetic Drill Press Affiliate link

This ZELCAN magnetic drill press features a 1550W copper motor and delivers 3125 lbf of holding force. It drills holes up to 2 inches in diameter and depth at 650 rpm. The unit includes a 16.9 fl. oz. coolant tank and six drill bits. It is designed for ferrous surfaces like steel. This tool suits industrial fabrication, shipbuilding, and equipment installation tasks where portability and power are required.

Pros

• 1550W copper motor provides strong drilling power
• 3125 lbf magnetic force anchors securely to metal
• Stepless speed control allows precise RPM adjustment
• Includes six drill bits for common hole sizes

Cons

• Single fixed speed of 650 rpm limits versatility
• 45.9 pound weight is heavy for portable use
• No variable speed settings for delicate materials

Good fit if

• You need to drill large holes in thick steel
• You work on vertical or overhead metal surfaces
• You require a powerful motor for industrial tasks

Skip if

• You need high-speed drilling for small holes
• You require variable speed control for precision
• You need a lightweight tool for frequent travel

Verdict: ZELCAN 1550W Magnetic Drill Press offers robust power and secure anchoring for heavy-duty steel work. It fits users who prioritize holding force and motor strength over speed flexibility.

Specifications side by side

Frequently asked questions

See also

• zelcan magnetic drill press 6 alternatives
• best drill presses under 150
• amzchef 6 5 chute cold press review
• cxwxc magnetic bike trainer 6 level review