WOODERS vs WOODSTARTER: Benchtop Planers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This WOODERS vs WOODSTARTER benchtop planer comparison focuses on two 13-inch machines built for similar tasks. Both offer 2,000W motors and 10,000 RPM cutterheads for steady performance on hardwoods and softwoods. The main difference lies in their cutting heads and feed speeds. The WOODERS uses a two-blade system, while the WOODSTARTER features three HSS blades and a faster feed rate. These specs affect surface finish and processing speed.
Key differences
| Aspect | WOODERS 13-Inch Two-Blade Benchtop Planer | WOODSTARTER 13-Inch 3-Blade Benchtop Planer |
|---|---|---|
| Blade Count | 2 blades | 3 HSS blades |
| Feed Rate | not listed | 21 ft/min |
| Maximum Stock Thickness | 6.3 inches | 6-1/4 inches |
| Weight | 60 pounds | 52 pounds |
| Dust Port | Integrated port | 3-in-1 port (1-2/5", 2-1/2", 4") |
Which one should you choose?
Choose WOODERS 13-Inch Two-Blade Benchtop Planer if
- You prefer a heavier, more stable machine that resists vibration on your workbench
- You want a slightly higher maximum thickness capacity for thick timbers
- You value an ergonomic depth adjustment crank designed to reduce wrist strain
Choose WOODSTARTER 13-Inch 3-Blade Benchtop Planer if
- You want a smoother finish with fewer tear-out marks from three cutting edges
- You need to process wood faster with a specified 21 ft/min feed rate
- You prefer a lighter unit that is easier to move around the shop
Verdict: Choose the WOODERS if you prioritize stability and a slightly thicker capacity for heavy-duty stock. Select the WOODSTARTER if you want faster processing speeds and a cleaner cut from its three-blade head. Both machines deliver the power needed for consistent benchtop planing.
Specs: WOODERS vs WOODSTARTER Planers
Blade count
The WOODSTARTER 13-Inch 3-Blade Benchtop Planer features a triple HSS blade cutter head. This setup slices through wood species at 10,000 RPM to deliver glass-smooth surfaces directly from the machine. You get finish-ready boards without tedious hand sanding. The WOODERS 13-Inch Two-Blade Benchtop Planer uses a dual-edge cutterhead with only two HSS blades. While it still delivers professional-grade finishes, the extra blade on the WOODSTARTER provides more cutting edges per revolution. This typically results in a finer finish and longer blade life before rotation is needed. More blades mean less chatter on difficult grain patterns.
Feed rate
The WOODSTARTER offers a specific feed rate of 21 ft/min. This aggressive speed allows you to process more wood in less time without sacrificing surface quality. Faster feed rates increase throughput for larger projects. The WOODERS does not list a feed rate in its specifications. Without this data, you cannot compare processing speed directly. However, the WOODERS emphasizes a 10,000 RPM cutterhead speed for raw power. If you prioritize speed and volume, the WOODSTARTER provides a clear metric. If you prefer slower, more controlled planing, the WOODERS might suit you better, though the lack of data makes this uncertain.
Motor power
Both machines share identical motor specifications. The WOODERS uses a 15A, 2000W all-copper motor. The WOODSTARTER also utilizes a 2000W motor. Both deliver 10,000 RPM cutterhead speed. This power level is sufficient for slicing through dense hardwoods like oak or walnut and soft pines. Neither machine bogs down or chatters under normal loads. Both include overload protection to safeguard the motor during extreme loads. Since the wattage, amperage, and RPM are exactly the same, performance expectations regarding raw cutting power should be comparable. You get the same driving force from either unit.
Cutting width
Both planers handle the same maximum width. The WOODERS has a 13-inch (330mm) max width. The WOODSTARTER also supports a 13-inch width. This capacity allows you to plane wide boards and thick timbers in a single pass. Neither machine has an advantage here. You can feed boards up to 13 inches wide into either cutterhead without issue. The swing is listed as 13-Inch for both configurations. This standard width covers most common lumber dimensions used in woodworking projects. If you need to plane wider stock, neither of these benchtop models will suffice, but for standard widths, they are equal.
Maximum thickness
There is a slight difference in maximum stock thickness. The WOODERS accepts stock up to 6.3 inches (6-160mm). The WOODSTARTER accepts stock up to 6-1/4 inches (6.25 inches). The WOODERS allows for a marginally thicker capacity. This 0.05-inch difference is negligible for most projects. Both machines handle deep cuts from 1/4 inch up to their respective maximums. The WOODERS depth adjustment ranges from 0 to 1/8 inch. The WOODSTARTER allows adjustments from 1/4 inch to 6-3/16 inch. The WOODERS has a tiny edge in raw capacity, but both handle thick slabs effectively.
Weight and build
The WOODERS is significantly heavier at 60 pounds. It features a heavy-duty iron blade shaft and rugged frame for industrial-grade stability. The extra mass helps it stay firmly planted on your workbench to reduce vibrations. The WOODSTARTER weighs 52 pounds. It is lighter, which might make it easier to move around the shop. However, the WOODERS 60-pound build suggests better vibration dampening during heavy cuts. A heavier machine generally reduces chatter. If stability is your priority, the WOODERS wins. If you need a lighter unit for storage, the WOODSTARTER is more portable.
Dust control
The WOODSTARTER features a multi-size 3-in-1 dust port. It connects to 1-2/5 inch, 2-1/2 inch, or 4 inch vacuum hoses. This flexibility allows you to attach various vacuum systems directly to the machine. The WOODERS includes an integrated dust port but does not specify compatible hose sizes in the data. You must assume it fits standard ports. The WOODSTARTER’s explicit support for multiple sizes is a practical advantage for shop setup. Both machines aim to capture debris at the source to keep your workspace clean. The WOODSTARTER gives you more options for vacuum compatibility.
Which benchtop planer suits your needs
Users seeking maximum cutting smoothness
The WOODSTARTER features a 3-blade HSS cutter head. This triple-blade setup slices through wood at 10,000 RPM to deliver glass-smooth surfaces. You get finish-ready boards without tedious hand sanding. The extra blade reduces visible tool marks compared to dual-blade designs, ensuring cleaner results on sensitive hardwoods.
Woodworkers handling thick stock
The WOODERS handles a maximum stock thickness of 6.3 inches. This exceeds the WOODSTARTER's 6-1/4 inch limit. If you frequently plane thick timbers or heavy slabs, this extra capacity allows you to process larger material in fewer passes. The 13-inch width remains standard for both machines.
Operators prioritizing ergonomic comfort
The WOODERS includes an oversized, smooth-turning depth adjustment crank. This ergonomic design minimizes hand and wrist strain during micro-precision adjustments. It also features a high-visibility height indicator. This setup is highly accessible for users with arthritis or those who prefer tactile, manual control over rapid feed rates.
The products compared
WOODERS 13-Inch Two-Blade Benchtop Planer
Best for: wide boards and dense hardwoods
- Cutting Width
- 13 in
- Blade Count
- 2
- Maximum Stock Thickness
- 6.3 in
- Motor Power
- 15A, 2000W
- Cutterhead Speed
- 10,000 RPM
- Swing
- 13-Inch
View on Amazon: WOODERS 13-Inch Two-Blade Benchtop Planer Affiliate link
The WOODERS 13-Inch Benchtop Planer uses a 2000W all-copper motor to spin its cutterhead at 10,000 RPM. It handles boards up to 13 inches wide and 6.3 inches thick. The machine includes two HSS blades and features overload protection for safety. It is designed for serious woodworking tasks, offering industrial-grade stability on your workbench.
Pros
- 15A 2000W all-copper motor delivers 10,000 RPM cutterhead speed
- 13-inch cutting width accommodates wide boards in a single pass
- 6.3-inch maximum stock thickness handles thick timbers
- Built-in overload protection safeguards the motor during extreme loads
- Includes two extra replacement HSS blades for quick swaps
Cons
- Only two HSS blades included compared to competitors with three
- 60-pound weight makes it difficult to move frequently
- Maximum thickness of 6.3 inches limits very large stock
Good fit if
- You need a 13-inch width for wide boards
- You require a high-speed cutterhead for dense hardwoods
- You want built-in overload protection for motor safety
Skip if
- You prefer a lighter machine for frequent relocation
- You need more than two blades for smoother cuts
- You require a capacity exceeding 6.3 inches in thickness
Verdict: WOODERS 13-Inch Benchtop Planer suits woodworkers who need a powerful 2000W motor for dense hardwoods and a 13-inch width for wide boards. It is a solid choice for stationary benchtop use where stability matters more than portability.
WOODSTARTER 13-Inch 3-Blade Benchtop Planer
Best for: Wide boards and high-speed planing
- Cutting Width
- 13 in
- Blade Count
- 3 HSS blades
- Maximum Stock Thickness
- 6-1/4 in
- Feed Rate
- 21 FPM
- Motor Power
- 2,000 W
- Cutterhead Speed
- 10,000 RPM
View on Amazon: WOODSTARTER 13-Inch 3-Blade Benchtop Planer Affiliate link
This WOODSTARTER benchtop planer features a 13-inch cutting width and a 2,000-watt motor running at 10,000 RPM. It includes three HSS blades and handles stock up to 6-1/4 inches thick. The 21 ft/min feed rate and adjustable tables help reduce snipe. It suits woodworkers who need a wide capacity and high-speed performance for thick slabs or panels.
Pros
- 13-inch cutting width for wide boards
- 2,000W motor maintains 10,000 RPM under load
- Three HSS blades for smooth surfaces
- 21 ft/min feed rate for fast processing
- Extended 29-inch table reduces snipe
Cons
- Only three HSS blades compared to four in competitors
- Heavier at 52 pounds, making it less portable
- Maximum stock thickness is 6-1/4 inches, slightly less than 6-3/16 inches
Good fit if
- You need to plane boards up to 13 inches wide
- You work with thick stock up to 6-1/4 inches
- You want a high-speed 10,000 RPM cutterhead
Skip if
- You require four HSS blades for finer finishes
- You need to plane material thicker than 6-1/4 inches
- You prefer a lighter machine for easy transport
Verdict: WOODSTARTER 13-Inch Benchtop Planer fits users who prioritize width and speed over blade count. It handles wide, thick stock well but may not suit those needing maximum thickness capacity.
Specifications side by side
| Spec | WOODERS 13-Inch Two-Blade Benchtop Planer | WOODSTARTER 13-Inch 3-Blade Benchtop Planer |
|---|---|---|
| Cutting Width | 13 in | 13 in |
| Blade Count | 2 | 3 HSS blades |
| Maximum Stock Thickness | 6.3 in | 6-1/4 in |
| Feed Rate | not stated | 21 FPM |
| Motor Power | 15A, 2000W | 2,000 W |
| Cutterhead Speed | 10,000 RPM | 10,000 RPM |
| Swing | 13-Inch | 13-Inch |
| Configuration | Benchtop | Benchtop |
| Amperage | 15 Amp | not stated |
| Target Material | Wood | Wood |
| Application | Woodworking | Woodworking |
| Dimensions | 22.4 × 14.2 × 17.9 inches | not stated |
| Weight | 60 pounds | 52 pounds |
| Color | Blue | Beige and Silver |
| Model | PL13-15AB | TP20K |
Frequently asked questions
Which benchtop planer is better for wide boards?
The WOODERS 13-Inch Two-Blade Benchtop Planer is the better choice for wide boards and dense hardwoods. It features a 13-inch swing width, allowing you to plane wider stock than many competitors. Its 2,000W motor provides the power needed to handle tough materials without bogging down. This makes it a solid choice for stationary benchtop use where stability matters.
Does the WOODSTARTER planer have more blades than the WOODERS?
Yes, the WOODSTARTER 13-Inch Benchtop Planer uses a 3-blade cutter head, while the WOODERS model uses a 2-blade setup. The triple-blade design on the WOODSTARTER helps deliver glass-smooth surfaces directly from the machine. This reduces the need for tedious hand sanding. The WOODERS relies on its two blades and higher motor amperage for performance.
How much space does the WOODERS planer take up?
The WOODERS 13-Inch Two-Blade Benchtop Planer measures 14.2 inches in width, 17.9 inches in height, and 22.4 inches in length. It weighs 60 pounds, providing a stable base for stationary work. These dimensions help you plan your workshop layout. The larger footprint compared to lighter models helps reduce vibration during operation on dense hardwoods.
Is the WOODSTARTER planer lighter than the WOODERS?
Yes, the WOODSTARTER 13-Inch 3-Blade Benchtop Planer weighs 52 pounds, which is 8 pounds lighter than the WOODERS model. The WOODERS weighs 60 pounds. The lighter weight of the WOODSTARTER may make it slightly easier to move if you need to reposition it on your bench. However, the WOODERS offers more mass for stability during heavy cuts.
What is the motor power on these benchtop planers?
Both the WOODERS and WOODSTARTER benchtop planers feature 2,000W motors. The WOODERS model draws 15 Amps of power. This consistent power output ensures steady performance on both hardwoods and softwoods. The high wattage helps maintain cutterhead speed when planing thick or dense stock, preventing the machine from stalling during demanding tasks.
Which planer is best for high-speed planing?
The WOODSTARTER 13-Inch Benchtop Planer is designed for users who prioritize width and speed. It operates with a cutterhead spinning at 10,000 RPM. This high speed helps slice through wood species efficiently. The 3-blade setup complements this speed by delivering a smooth finish. It fits users who need to process wide, thick stock quickly.
Can these planers handle dense hardwoods?
Yes, both machines are built to handle dense hardwoods. The WOODERS 13-Inch model is specifically noted as suitable for dense hardwoods due to its powerful 2,000W motor. The WOODSTARTER also features a 2,000W motor and a 10,000 RPM cutterhead for steady performance. Both are target materials of wood, ensuring they can manage tough species effectively.