WEN 6.2-Amp 33-Inch Radial Arm Review (2026): A Spec-Based Look

What stands out

• 33-inch swing radius for large workpieces
• 6.2-amp induction motor for consistent power
• Five speed settings from 600 to 3100 RPM
• 3-1/8-inch spindle travel depth
• Heavy-duty cast-iron base and tilting table

Who it fits

Key specs for this drill press

Swing: 11 to 33 in

This range defines the maximum diameter of material you can drill in a single setup. The sliding and swiveling head allows you to adjust the reach from 11 inches up to 33 inches. This flexibility lets you position the drill over larger workpieces without moving the wood or metal. It is ideal for projects that require drilling near the center of a wide board or large panel.

Motor Power: 6.2A

The 6.2-amp induction motor provides consistent torque for drilling through various materials. Induction motors are known for durability and smooth operation under load. This power level suits most benchtop applications, including hardwoods and metals. You can rely on steady performance for repetitive tasks. It is a standard power rating for this class of machine, offering a balance between capacity and energy use.

Chuck Capacity: 5/8 in keyed chuck

The keyed chuck accepts drill bits up to 5/8 inch in diameter. This size covers most common drilling needs for home workshops and light professional work. You must use a key to tighten or loosen the bits, which ensures a secure grip. It is a traditional design that prioritizes holding power over quick changes. Check your bit sizes to ensure they fit within this limit.

Spindle Travel: 3-1/8 in

This measurement indicates how far the drill bit can move down into the material. A 3-1/8 inch travel allows for deep holes without needing to stop and clear chips frequently. It is sufficient for most through-drilling and counterboring tasks. You should verify that this depth meets your specific project requirements. Deeper travel is useful for long shank bits or thick materials.

Design and build specs

The listing describes this unit as a benchtop drill press with a black finish. It measures 16 by 38 by 33 inches. The weight is listed as 113 pounds. This mass helps stabilize the machine on your workbench. The heavy-duty cast-iron base anchors the press securely. It reduces vibration during high-speed operations. The cast-iron construction extends to the tilting 10-inch worktable. This material provides a flat, durable surface for your projects. The table can tilt to accommodate angled drilling tasks. You can position the workpiece anywhere within the 11 to 33-inch swing radius. The sliding and swiveling head allows you to adjust the reach easily. This layout lets you drill large sheets without moving the material. The 5/8-inch capacity keyed chuck holds standard drill bits firmly. The 6.2-amp induction motor drives the spindle through five speeds. You select the RPM based on your bit size and material. The 3-1/8-inch spindle travel gives you room for deeper holes. According to the listing, the design prioritizes rigidity and reach. This build suits workshops where you need to drill large diameters. The benchtop form factor keeps it portable yet stable. The cast-iron components suggest long-term durability under heavy use.

Setup and everyday use

This benchtop drill press weighs 113 pounds. That mass helps stabilize the machine on your workbench during operation. You will need a sturdy surface to support the full weight. The unit measures 16 by 38 by 33 inches. Ensure you have enough clearance for the 33-inch swing radius. The sliding and swiveling head allows you to adjust the reach from 11 inches up to 33 inches. This flexibility lets you drill large sheets of material without repositioning the workpiece. You do not need to move the entire machine for different job sizes.

The machine features a 6.2-amp induction motor. This power source drives the spindle through five distinct speeds. You can select 600, 1100, 1700, 2300, or 3100 RPM. These settings cover a wide range of drilling tasks. Use lower speeds for larger holes or harder materials. Higher speeds work well for smaller drills in softer wood. The 3-1/8-inch spindle travel provides ample depth for most standard projects. You can drill deep holes without changing bit setups frequently.

Daily use involves the tilting 10-inch cast iron worktable. This table supports your workpiece at various angles. The heavy-duty cast-iron base adds stability. You secure bits using the 5/8-inch capacity keyed chuck. This chuck handles standard drill bit shanks up to 5/8 inch. The design is straightforward. You position the head, select the speed, and begin drilling. The cast iron construction minimizes vibration. This results in cleaner holes. The setup is typical for benchtop radial arm models. You attach the arm to the base and align the head. The process is standard for this class of equipment.

Before You Buy This WEN

This WEN 4233 is a heavy benchtop unit. It weighs 113 pounds. You need a solid workbench to support it. The sliding head requires clearance on all sides. Ensure your space allows the arm to extend fully to 33 inches. Check your power outlet for a standard 120-volt circuit. The 6.2-amp motor draws significant current. Do not use extension cords if possible. You must provide your own drill bits. The keyed chuck accepts up to 5/8-inch shanks. Verify your bit sizes fit this limit. Cast iron parts need occasional oiling. Wipe down the table after use to prevent rust. This machine suits users needing a wide swing radius. It differs from smaller benchtop models. If you drill large diameters, this reach matters. For precision work, check the spindle runout specs. Compare it with other radial options. Consider your typical project sizes. This unit fits well in a home shop with space. It is not for portable use. Read the manual for lubrication points. Keep the area clean. This guide covers 1 similar machines. This one stands out for its reach.

Check before you buy

• Verify your workbench can hold 113 pounds safely.
• Check if your shop has enough floor space for the 33-inch swing.
• Confirm your power outlet handles a 6.2-amp continuous load.
• Ensure you have drill bits with shanks under 5/8 inch.
• Plan for regular cleaning and light oiling of cast iron parts.

The product at a glance

1

WEN 33-Inch Radial Arm Benchtop Drill Press

Best for: Large diameter drilling and heavy workpieces

Motor Power

6.2A

Swing

11 to 33 in

Spindle Travel

3-1/8 in

Chuck Capacity

5/8 in keyed chuck

Configuration

Benchtop

Amperage

6.2 A

View on Amazon: WEN 33-Inch Radial Arm Benchtop Drill Press Affiliate link

This benchtop radial arm drill press features a 6.2-amp motor and a 33-inch swing. It offers five speeds from 600 to 3100 RPM and a 3-1/8-inch spindle travel. The unit weighs 113 pounds and includes a cast-iron base and tilting worktable. You get a 5/8-inch keyed chuck for standard bits. This setup suits users needing a large reach for wide workpieces.

Pros

• 33-inch swing diameter for large projects
• Five speed settings from 600 to 3100 RPM
• Heavy 113-pound cast-iron base for stability
• 3-1/8-inch spindle travel for deep holes

Cons

• Keyed chuck requires manual tightening
• 113-pound weight makes it difficult to move
• No variable speed control listed

Good fit if

• You need to drill large diameter holes
• You want a stable benchtop radial arm setup
• You prefer cast-iron construction for vibration dampening

Skip if

• You need to drill holes larger than 33 inches
• You require variable speed control for fine adjustments
• You have limited floor space for a 38-inch footprint

Verdict: WEN 33-Inch Radial Arm Drill Press provides a wide 33-inch reach and stable cast-iron build for large workshop tasks. It fits users who prioritize swing capacity and durability over portability or variable speed precision.

Specifications side by side

Frequently asked questions

See also

• wen 6 2 amp 33 inch radial arm alternatives
• WEN vs PioneerWorks drill press
• wen 15 inch 13 amp 2 in 1 electric review
• makita sp6000j 6 1 2 inch 12 amp corded review