WEN 14-Inch Two-Speed Band Saw or WEN 14-Inch 1 HP Two-Speed? Which WEN Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the wen 14 inch two speed band saw vs 14 inch 1 hp two speed. Both tools offer 14-inch swing capacity and two-speed motors for versatile cutting. They share key features like blade tension gauges and miter gauges. The main difference lies in their motor power and table construction. One model provides a larger cast aluminum table with deeper cutting capacity. The other features a cast iron table and dual-voltage support for higher power. Your choice depends on your specific workspace and material needs.
Key differences
| Aspect | WEN 14-Inch Two-Speed Band Saw | WEN 14-Inch 1 HP Two-Speed Band Saw |
|---|---|---|
| Motor Power | 9.5 A | 11 A, 1 HP |
| Table Material | Cast Aluminum | Cast Iron |
| Cutting Capacity | 8.85 in | 6 in |
| Blade Speed | 1480 or 3280 FPM | 1700 or 3000 FPM |
| Voltage | not listed | 120V / 240V |
| Table Tilt | Up to 45° | 15° left to 45° right |
Which one should you choose?
Choose WEN 14-Inch Two-Speed Band Saw if
- You need deeper cutting capacity up to 8.85 inches
- You prefer a lighter machine at 139 pounds
- You want a larger 21.5 x 15.75-inch work table
Choose WEN 14-Inch 1 HP Two-Speed Band Saw if
- You require 1 HP power for tougher materials
- You need dual-voltage support for 120V or 240V outlets
- You want a cast iron table for better vibration reduction
Verdict: Choose the WEN BA1487 if you prioritize cutting depth and a larger work surface. Pick the WEN BA1411 if you need more motor power and dual-voltage flexibility. Both models serve different needs within the 14-inch band saw category.
Comparing WEN 14-Inch Band Saw Specs
Motor power
The WEN 14-Inch 1 HP Two-Speed Band Saw features a more robust 11-amp, 1 HP motor. This higher power output allows it to handle denser materials with less strain. In contrast, the WEN 14-Inch Two-Speed Band Saw uses a 9.5-amp motor. While sufficient for general woodworking, it offers less torque than the 1 HP model. You should choose the 1 HP version if you plan to cut thicker hardwoods or require consistent power under heavy loads. The extra ampereage translates directly to better cutting performance in demanding tasks.
Cutting depth
When evaluating vertical cutting capacity, the WEN 14-Inch Two-Speed Band Saw takes the lead with an 8.85-inch cutting depth. This allows you to slice through thicker stock without needing to flip the material. The WEN 14-Inch 1 HP Two-Speed Band Saw offers a 6-inch cutting depth. While adequate for many standard projects, it limits the thickness of material you can process in a single pass. If your work involves thick lumber or large cross-sections, the deeper cut of the first model provides significant practical advantages for efficiency and ease of use.
Table size
Work surface dimensions differ notably between these two models. The WEN 14-Inch Two-Speed Band Saw includes a spacious 21.5 by 15.75-inch cast aluminum table. This larger area provides better support for wide boards and complex shapes. The WEN 14-Inch 1 HP Two-Speed Band Saw features a smaller 14-by-14-inch cast iron table. While cast iron offers durability, the reduced surface area may require more support for larger pieces. You will likely find the aluminum table on the first model more convenient for handling wide stock without additional outfeed support.
Voltage options
Power flexibility is a key differentiator. The WEN 14-Inch 1 HP Two-Speed Band Saw supports dual voltage operation at 120V or 240V. This allows you to plug it into a standard outlet or use a higher-voltage circuit for maximum performance. The WEN 14-Inch Two-Speed Band Saw does not list dual voltage capabilities in its specifications, implying standard 120V operation. If you have access to a 240V outlet, the 1 HP model can leverage that power for smoother cuts. For users restricted to standard outlets, both function, but the 1 HP model offers more electrical versatility.
Blade compatibility
Both saws accept different blade lengths, which affects replacement costs and availability. The WEN 14-Inch Two-Speed Band Saw uses 100-3/4-inch blades. The WEN 14-Inch 1 HP Two-Speed Band Saw requires 93.5-inch blades. You must purchase the correct blade length for your specific machine. Standard 14-inch band saw blades often come in these common lengths, but mixing them up will prevent proper installation. Check your current blade size before buying replacements. This spec does not favor one model over the other, but it is essential for maintenance planning.
Table tilt range
Bevel cutting capabilities vary between the two machines. The WEN 14-Inch Two-Speed Band Saw table tilts up to 45 degrees uniformly. This simple range is sufficient for most standard bevel cuts. The WEN 14-Inch 1 HP Two-Speed Band Saw table tilts 15 degrees to the left and 45 degrees to the right. This asymmetric range may be useful for specific angled cuts that require directionality. For general use, the uniform 45-degree tilt of the first model is straightforward. However, if your projects require frequent left-side bevels, the second model offers that specific capability.
Which WEN 14-Inch Band Saw Fits You
Heavy-duty industrial users needing power
The 1 HP, 11-amp motor delivers more torque for demanding cuts. Dual-voltage support (120V/240V) offers flexibility for different shop setups. The cast iron table and frame reduce vibration, ensuring smoother operation during extended use on dense materials.
Woodworkers requiring deeper cutting capacity
This model offers a cutting depth of 8.85 inches, significantly deeper than the 6-inch limit of the other option. The larger 15-3/4-inch table width provides better support for wide workpieces, making it ideal for thick stock and large projects.
Users needing versatile blade compatibility
It accepts blades up to 1 inch wide, accommodating a wider range of cutting needs compared to the narrower limit of the competitor. The 100-3/4-inch blade length also allows for different blade types, giving you more options for various cuts.
The products compared
WEN 14-Inch Two-Speed Band Saw
Best for: Users needing a complete stand-included setup
- Cutting Capacity
- 8.85 in
- Throat Size
- 13-3/8 in
- Motor Power
- 9.5 A
- Blade Speed
- 1480 or 3280 FPM
- Blade Length
- 100-3/4 in
- Table Tilt
- Up to 45°
View on Amazon: WEN 14-Inch Two-Speed Band Saw Affiliate link
This WEN 14-inch band saw features a 9.5-amp motor and two speeds of 1480 or 3280 FPM. It offers a 13-3/8-inch throat and 8.85-inch cutting depth. The cast aluminum table tilts up to 45 degrees. It includes a stand, fence, and dust port. This model suits users needing a complete setup for general woodworking and cutting aluminum.
Pros
- Includes a heavy-duty stand for stability
- Two-speed operation (1480 or 3280 FPM)
- Cast aluminum table tilts up to 45 degrees
- 9.5-amp motor provides 8.85-inch cutting depth
Cons
- Motor is 9.5 amps, lower than 1 HP competitors
- Uses 120V power only, lacking dual-voltage support
- Table size is 21-1/2 x 15-3/4 inches
Good fit if
- You want a band saw that includes a stand
- You need two speed settings for different materials
- You work with materials up to 13-3/8 inches wide
Skip if
- You require dual-voltage 120V/240V power options
- You need a 1 HP motor for heavy-duty use
- You prefer a larger table surface area
Verdict: WEN 14-Inch Two-Speed Band Saw with Stand is a practical choice for hobbyists who need a ready-to-use setup with a stand. It fits users who prioritize convenience over maximum motor power.
WEN 14-Inch 1 HP Two-Speed Band Saw
Best for: Dual-voltage users needing two-speed versatility
- Cutting Capacity
- 6 in
- Throat Size
- 13.5 in
- Motor Power
- 11 A, 1 HP
- Blade Speed
- 1700 or 3000 FPM
- Blade Length
- 93.5 in
- Table Tilt
- 15° left to 45° right
View on Amazon: WEN 14-Inch 1 HP Two-Speed Band Saw Affiliate link
This WEN 14-inch band saw features a 1 HP dual-voltage motor and two-speed settings at 1700 or 3000 FPM. It offers a 13.5-inch throat and 6-inch cutting depth. The cast iron table tilts up to 45 degrees right. You get a sturdy steel stand and ball bearing guides. This model suits users needing versatile speed options and reliable power for various woodworking tasks.
Pros
- 1 HP motor handles cuts up to 6 inches deep
- Dual-voltage support for 120V or 240V operation
- Two-speed settings at 1700 or 3000 FPM
- Cast iron table tilts 45 degrees to the right
- Includes heavy-duty steel stand for stability
Cons
- No remote control included
- No app connectivity
- Blade length is 93.5 inches, which may limit large blade availability
Good fit if
- You need dual-voltage flexibility for your workshop
- You require two-speed settings for different materials
- You want a cast iron table for stability
Skip if
- You prefer a single-speed machine
- You need more than 6 inches of cutting depth
- You want a smaller footprint than 20.5 inches long
Verdict: WEN 14-Inch 1 HP Two-Speed Band Saw fits users who need dual-voltage flexibility and two-speed settings for varied woodworking tasks. It is a solid choice for those prioritizing power and table stability over compact size.
Specifications side by side
| Spec | WEN 14-Inch Two-Speed Band Saw | WEN 14-Inch 1 HP Two-Speed Band Saw |
|---|---|---|
| Cutting Capacity | 8.85 in | 6 in |
| Throat Size | 13-3/8 in | 13.5 in |
| Motor Power | 9.5 A | 11 A, 1 HP |
| Blade Speed | 1480 or 3280 FPM | 1700 or 3000 FPM |
| Blade Length | 100-3/4 in | 93.5 in |
| Table Tilt | Up to 45° | 15° left to 45° right |
| Power Source | not stated | 120V / 240V |
| Swing | 14-Inch | 14-Inch |
| Speed Settings | 2-Speed | 2-Speed |
| Target Material | Aluminum | not stated |
| Voltage | not stated | 120V |
| Dimensions | 15 × 3 × 2 inches | 20.5 × 14 × 66.5 inches |
| Weight | 139 pounds | not stated |
| Size | Cast Aluminum Table | 93.5-inch blades |
| Color | Black | Silver |
| Model | BA1487 | BA1411 |
Frequently asked questions
Does the WEN 14-Inch Two-Speed Band Saw include a stand?
Yes, the WEN 14-Inch Two-Speed Band Saw (Model BA1487) comes with a stand included in the package. This makes it a complete, ready-to-use setup for hobbyists who want convenience without buying separate accessories. It weighs 139 pounds and features a cast aluminum table.
Is the WEN 14-Inch 1 HP Two-Speed Band Saw dual-voltage?
Yes, the WEN 14-Inch 1 HP Two-Speed Band Saw (Model BA1411) supports dual-voltage operation. It works with 120V power sources, offering flexibility for different shop setups. This feature allows you to adapt the tool to various electrical environments without needing additional adapters.
What is the weight difference between the two WEN models?
The WEN 14-Inch Two-Speed Band Saw with Stand weighs 139 pounds. The WEN 14-Inch 1 HP Two-Speed Band Saw does not list a specific weight in its specifications, but it has a larger footprint with a length of 20.5 inches and a height of 66.5 inches.
Which model is better for cutting aluminum?
The WEN 14-Inch Two-Speed Band Saw is explicitly listed as targeting aluminum as its material. Both models offer two-speed settings, which can help optimize cutting speeds for different materials. If aluminum cutting is your primary goal, the first model highlights this capability in its attributes.
How do the table sizes compare on these band saws?
The WEN 14-Inch Two-Speed Band Saw features a cast aluminum table. The WEN 14-Inch 1 HP Two-Speed Band Saw does not specify the table material in the provided data, but it is noted for having a cast iron table and frame in general descriptions to reduce vibration.
What blade size do these band saws use?
The WEN 14-Inch 1 HP Two-Speed Band Saw uses 93.5-inch blades. The blade length for the WEN 14-Inch Two-Speed Band Saw is not specified in the available data. Both tools share a 14-inch swing capacity, which determines the maximum width of material you can cut.
Which model has a more robust motor?
The WEN 14-Inch 1 HP Two-Speed Band Saw features a 1 HP motor. This higher power output is designed to handle denser materials with less strain. The other model does not list a specific horsepower rating, making the 1 HP version the choice for heavier-duty tasks.