Vimke 1380W Low Profile Magnetic vs Vimke 1400W 2-Inch Magnetic Drill: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the vimke 1380w low profile magnetic vs 1400w 2 inch magnetic drill to decide which tool fits your workflow. Both units feature pure copper motors and dual-coil magnetic bases for safe operation on metal surfaces. The main difference lies in their physical design and drilling capacity. One model prioritizes a compact, low-profile form factor for tight spaces, while the other offers a larger bore diameter and adjustable speed settings for heavier industrial tasks. You must weigh portability against raw power.
Key differences
| Aspect | Vimke 1380W Low Profile Magnetic Drill Press | Vimke 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Hole Capacity | 1.4 in | 2 in |
| Spindle Speed | Up to 680 RPM | 10-speed, up to 810 RPM |
| Magnetic Force | 2585 lbf (11500 N) | 2922 lbf (13000 N) |
| Design | Low Profile | Portable |
| Dimensions | 3.9 x 8.3 x 11 in | 14.2 x 10.6 x 4.7 in |
Which one should you choose?
Choose Vimke 1380W Low Profile Magnetic Drill Press if
- You need to drill in tight, hard-to-reach areas where height is restricted.
- You prefer a lighter, more compact unit that is easier to carry and store.
- You are working on thinner materials where a 1.4-inch hole capacity is sufficient.
Choose Vimke 1400W 2-Inch Magnetic Drill Press if
- You require larger 2-inch diameter holes for structural steel or heavy machinery.
- You need variable speed control to adjust drilling rates for different materials.
- You want a stronger magnetic base for maximum stability on vertical or overhead surfaces.
Verdict: Choose the 1380W Low Profile model if your work involves confined spaces and moderate hole sizes. The 1400W 2-Inch model is better suited for heavy-duty applications requiring larger diameters and variable speed adjustments. Both tools provide reliable magnetic attachment and safety features for professional use.
Specs: Low Profile vs 2-Inch Mag Drill
Motor wattage
The Vimke 1400W 2-Inch Magnetic Drill Press leads with a 1400W pure copper motor. This higher power output supports sustained operation at high intensity, which is useful for demanding industrial tasks. The Vimke 1380W Low Profile Magnetic Drill Press uses a 1380W pure copper motor. While slightly less powerful, it still provides robust performance for standard drilling needs. Both motors are wound with pure copper wire to ensure efficiency and durability during extended use. The 20W difference is minor, but the 1400W model offers a clear edge in raw power potential for heavy-duty applications.
Hole capacity
Drilling large holes is where the Vimke 1400W 2-Inch Magnetic Drill Press shines. It handles a maximum core drilling diameter of 2 inches, making it suitable for larger structural steel work. In contrast, the Vimke 1380W Low Profile Magnetic Drill Press has a maximum core drilling diameter of 1.4 inches. This limits its ability to cut larger holes without multiple passes or different tools. If your projects require frequent large-diameter boring, the 2-inch capacity is a significant advantage. For smaller, more precise holes, both machines perform adequately, but the larger capacity offers greater versatility.
Spindle speed
Speed options vary between the two models. The Vimke 1400W 2-Inch Magnetic Drill Press reaches a maximum speed of 810 RPM. It also features stepless speed control with ten distinct settings, allowing you to fine-tune the rotation for different materials. The Vimke 1380W Low Profile Magnetic Drill Press tops out at 680 RPM. It does not list stepless speed control in its specifications. The lower maximum speed may be sufficient for softer metals, but the 1400W model offers better adaptability for harder materials that require higher RPMs for efficient cutting.
Magnetic force
Both drills feature strong magnetic bases for secure attachment to metal surfaces. The Vimke 1400W 2-Inch Magnetic Drill Press provides a magnetic attraction force of 2922 lbf (13000 N). The Vimke 1380W Low Profile Magnetic Drill Press offers 2585 lbf (11500 N). Both units use a pure-iron double-coil design for high conductivity and safety. The 1400W model exerts more holding power, which can be crucial when drilling thick steel or working on vertical surfaces. The 1380W model still provides ample force for most standard applications, but the 1400W unit has the edge in raw holding strength.
Physical dimensions
Size and portability differ significantly between these two units. The Vimke 1380W Low Profile Magnetic Drill Press is designed for tight spaces. It measures 3.9 inches in width, 8.3 inches in height, and 11 inches in length. Its low profile allows it to fit into confined areas where larger drills cannot reach. The Vimke 1400W 2-Inch Magnetic Drill Press is wider at 14.2 inches and taller at 10.6 inches, though it is shorter in length at 4.7 inches. The 1380W model is clearly better suited for cramped workspaces, while the 1400W model is bulkier but still portable.
Choose the right mag drill
Tight space maintenance workers
You need a low profile design for confined areas. This model measures 8.3 inches in height and 3.9 inches in width. Its compact dimensions allow it to fit into hard-to-reach spots. The detachable design also aids in storage and transport, making it ideal for site work where space is limited.
Heavy industrial drilling users
You require larger hole capacity and higher power. This unit drills up to 2-inch holes with a 1400W motor reaching 810 RPM. The 13000N magnetic force ensures stability on heavy steel structures. Features like stepless speed control and a cooling pot support sustained, high-intensity drilling in demanding industrial environments.
Precision adjustment seekers
You value adjustable motor height and reversible drilling. This drill press features double dovetail guide rails for smooth, jam-free sliding. The stepless speed knob allows precise RPM adjustments. A reversible switch helps clear chips or remove stuck bits. These specs offer greater control over drilling depth and direction compared to fixed setups.
The products compared
Vimke 1380W Low Profile Magnetic Drill Press
Best for: tight space structural steel drilling
- Motor Power
- 1380W
- Spindle Speed
- up to 680 RPM
- Hole Capacity
- 1.4 in
- Spindle Travel
- 1.8 in
- Magnetic Force
- 11500 N (2585 lbf)
- Chuck Capacity
- 3/4 in
View on Amazon: Vimke 1380W Low Profile Magnetic Drill Press Affiliate link
The Vimke 1380W magnetic drill press offers a 1.4-inch hole capacity and up to 680 RPM speed. Its low profile design fits tight spaces, while the 2585 lbf magnetic base ensures stability on steel. This portable unit includes a 3/4-inch chuck and 1.8-inch spindle travel, making it suitable for industrial tasks like bridge construction or equipment installation.
Pros
- 1380W pure copper motor delivers up to 680 RPM
- 2585 lbf magnetic force secures the unit on steel
- Low profile design fits into tight, hard-to-reach areas
- 1.4-inch maximum core drilling diameter for large holes
Cons
- 1.4-inch hole capacity is smaller than the 2-inch competitors
- 3/4-inch chuck limits bit size compared to larger models
- 680 RPM speed is lower than typical high-speed drills
Good fit if
- You need to drill in tight, low-clearance spaces
- You work with thick steel plates requiring strong magnetic hold
- You require a portable unit for on-site construction tasks
Skip if
- You need to drill holes larger than 1.4 inches
- You require high-speed drilling above 680 RPM
- You need a 2-inch boring diameter for large cores
Verdict: The Vimke 1380W Low Profile Magnetic Drill fits users who prioritize access to tight spaces over maximum hole size. It is a practical tool for structural steel work where clearance is limited.
Vimke 1400W 2-Inch Magnetic Drill Press
Best for: Drilling thick steel plates up to 2 inches
- Motor Power
- 1400W
- Spindle Speed
- 10-speed, 810 RPM
- Hole Capacity
- 2 in
- Magnetic Force
- 2922 lbf / 13000 N
- Configuration
- Magnetic
- Target Material
- Metal
View on Amazon: Vimke 1400W 2-Inch Magnetic Drill Press Affiliate link
This Vimke magnetic drill features a 1400W copper motor and delivers 2922 lbf of holding force. It bores holes up to 2 inches at a top speed of 810 RPM. The unit includes a cooling pot and dual dovetail guide rails for stable operation. You should choose this model if you need high torque for thick steel plates or structural steel work in industrial settings.
Pros
- 1400W copper motor for high-intensity drilling
- 2922 lbf magnetic holding force
- 2-inch boring diameter capacity
- Stepless speed control with 10 settings
- Integrated cooling pot system
Cons
- Maximum hole capacity limited to 2 inches
- Top speed capped at 810 RPM
- Requires external coolant for optimal performance
Good fit if
- You are drilling thick steel structures
- You need strong holding force for vertical work
- You require a portable magnetic drill for site use
Skip if
- You need to drill holes larger than 2 inches
- You require high-speed drilling above 810 RPM
- You prefer a low-profile design for tight spaces
Verdict: Vimke 1400W 2-Inch Magnetic Drill suits professionals drilling heavy steel structures who need strong holding force. It is not suitable for users requiring larger hole capacities or higher rotational speeds.
Specifications side by side
| Spec | Vimke 1380W Low Profile Magnetic Drill Press | Vimke 1400W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 1380W | 1400W |
| Spindle Speed | up to 680 RPM | 10-speed, 810 RPM |
| Hole Capacity | 1.4 in | 2 in |
| Spindle Travel | 1.8 in | not stated |
| Magnetic Force | 11500 N (2585 lbf) | 2922 lbf / 13000 N |
| Chuck Capacity | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic |
| Target Material | not stated | Metal |
| Design | Low Profile | Portable |
| Dimensions | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Model | WF23824X | WF21456X |
Frequently asked questions
Which drill is best for tight spaces?
The Vimke 1380W Low Profile Magnetic Drill is the better choice for confined areas. Its compact design measures 8.3 inches in height and 3.9 inches in width. This low profile allows it to fit into tight structural steel workspaces where larger tools cannot reach.
What is the maximum hole capacity of the 1400W model?
The Vimke 1400W 2-Inch Magnetic Drill Press is designed for drilling thick steel plates up to 2 inches. This capacity makes it suitable for professionals working on heavy steel structures that require larger diameter holes than the low profile alternative can provide.
How do the dimensions compare between the two models?
The 1380W Low Profile model is shorter at 8.3 inches high and narrower at 3.9 inches wide. In contrast, the 1400W 2-Inch model is taller at 10.6 inches and wider at 14.2 inches. These size differences dictate which tool fits your specific workspace constraints.
Do both drills use magnetic bases?
Yes, both units feature a magnetic configuration with dual-coil magnetic bases. This design ensures safe operation on metal surfaces by providing strong holding force. You can rely on this magnetic attachment for stability during drilling tasks on vertical or overhead steel surfaces.
Is the 1400W model suitable for portable use?
The Vimke 1400W 2-Inch Magnetic Drill Press is described as portable. However, its larger dimensions of 14.2 inches in width and 4.7 inches in length make it bulkier than the low profile option. Consider your need for mobility versus access to tight spots.
Which motor is more powerful?
The Vimke 1400W 2-Inch Magnetic Drill Press has the more powerful motor at 1400W. The 1380W Low Profile model uses a 1380W motor. The higher wattage in the 1400W unit supports sustained operation at high intensity for demanding industrial tasks.
Can I use the low profile drill for structural steel?
Yes, the Vimke 1380W Low Profile Magnetic Drill is practical for structural steel work. It is specifically recommended for users who prioritize access to tight spaces. Its design allows you to drill in confined areas where clearance is limited.
What are the model numbers for these drills?
The Vimke 1380W Low Profile Magnetic Drill has the model number WF23824X. The Vimke 1400W 2-Inch Magnetic Drill Press carries the model number WF21456X. You can use these identifiers to locate the correct specifications or replacement parts for your chosen tool.