VEVOR or Garvee? Drill Presses Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The VEVOR vs garvee drill press comparison highlights two distinct tools for different tasks. Both machines use pure copper motors for durability and offer variable speed control for precision work. The main difference lies in their design and application. The VEVOR is a portable magnetic drill built for steel fabrication, while the Garvee is a stationary floor drill press suitable for wood and metal. You must choose based on whether you need portability or a stable benchtop setup.
Key differences
| Aspect | VEVOR 1450W Variable Speed Magnetic Drill | Garvee 13-Inch Floor Drill Press |
|---|---|---|
| Configuration | Magnetic | Benchtop |
| Motor Power | 1450W | 7.5 Amp |
| Hole Capacity | 2" / 50 mm | 5/8" |
| Spindle Speed | 0-750 RPM | 288-3084 RPM |
| Target Material | Metal | Metal, Wood |
| Weight | 26.5 pounds | not listed |
Which one should you choose?
Choose VEVOR 1450W Variable Speed Magnetic Drill if
- You need to drill large holes in steel plates at construction sites or industrial settings.
- You require a portable unit that attaches securely to vertical or horizontal surfaces.
- You prioritize high holding force and rapid cooling for heavy-duty metal fabrication.
Choose Garvee 13-Inch Floor Drill Press if
- You need a stationary press for precise drilling in wood, metal, or general workshop projects.
- You require higher maximum speeds for smaller drill bits and finer material control.
- You want a standard floor-standing design with a tilting table for versatile positioning.
Verdict: Choose the VEVOR if your work involves heavy steel fabrication and requires portability. Select the Garvee if you need a versatile stationary press for woodworking and smaller metal drilling tasks.
VEVOR vs Garvee Drill Press
Configuration
The VEVOR is a portable magnetic drill designed for heavy-duty field work. It uses a powerful magnetic base to attach securely to steel plates. This design allows you to drill in horizontal or inverted positions, making it ideal for shipbuilding, bridges, and railways. The Garvee is a traditional floor-standing drill press. It features a stable cast iron base and a vertical column. This configuration is best for workshop environments where you need to drill wood or metal on stationary workpieces. You cannot use the Garvee for overhead drilling. The VEVOR wins here for versatility in different positions.
Motor Power
Power specifications differ significantly between these two machines. The VEVOR features a 1450W copper motor that delivers high torque for drilling through tough materials. This wattage supports its high magnetic holding force of 2922 lbf. The Garvee uses a 7.5 Amp motor. While the data does not list the wattage for the Garvee, 7.5 Amps typically equates to roughly 900W. The VEVOR offers more raw power for large diameter holes in thick steel. The Garvee provides sufficient power for general workshop tasks involving smaller bits. The VEVOR takes the edge for higher power output.
Hole Capacity
The maximum hole diameter each machine can handle varies greatly. The VEVOR can drill a maximum core diameter of 2 inches (50 mm). This makes it suitable for large conduit holes or structural steel work. The Garvee has a swing of 13 inches, but its chuck capacity and drill capacity are limited to 5/8 inch. This means the largest hole you can drill with the Garvee is 5/8 inch. If you need to drill larger holes, the VEVOR is the only option. The Garvee is limited to smaller diameter holes. The VEVOR clearly wins for larger hole capacity.
Speed Settings
Both machines offer variable speed control, but the ranges differ. The VEVOR operates at 0-750 RPM. This lower speed range is optimal for large diameter core drilling in steel, where high torque at low speeds is essential. The Garvee offers a much wider range from 288 to 3084 RPM. This higher maximum speed allows for efficient drilling in wood, plastic, and smaller metal holes. The Garvee is more versatile for general purpose drilling where speed matters. The VEVOR is specialized for slow, powerful drilling. The Garvee wins for broader speed range.
Target Material
The intended materials for each drill press are distinct. The VEVOR is designed specifically for steel plates that are at least 0.39 inches thick. It is not suitable for stainless steel or cast iron. It is built for fabrication, equipment installation, and heavy metal work. The Garvee is a general-purpose machine. It can drill through various materials, including wood and metal. This makes it better for DIY projects, woodworking, and light metalwork. If you need to drill wood, the Garvee is the clear choice. The VEVOR is restricted to carbon steel. The Garvee wins for material versatility.
Which Drill Press Fits Your Work
Steel fabricators needing portability
The VEVOR magnetic drill offers 2922 lbf holding force and 1450W power. Its 2-inch coring capacity and variable speed suit heavy steel work. The portable design allows horizontal or inverted drilling on-site, making it ideal for field fabrication tasks where a stationary press is impractical.
Woodworkers seeking precision benchtop use
The Garvee drill press features a 13-inch swing and 288-3084 RPM range. Its 3.2-inch spindle travel and 5/8-inch chuck capacity handle diverse woodworking projects. The stationary floor design ensures stability for accurate, repeatable holes in wood and softer materials without the need for magnetic attachment.
DIyers drilling metal and wood
This versatile benchtop press covers both materials with its 7.5A motor and wide speed range. The 13-inch swing accommodates larger workpieces. Unlike the magnetic unit, it does not require thick steel plates, allowing you to drill wood, thin metal, and other materials safely in a workshop setting.
The products compared
VEVOR 1450W Variable Speed Magnetic Drill
Best for: Heavy steel plate core drilling
- Motor Power
- 1450W
- Spindle Speed
- 0-750 RPM
- Hole Capacity
- 2" / 50 mm
- Spindle Travel
- 2" / 50 mm
- Magnetic Force
- 2922 lbf / 13,000 N
- Configuration
- Magnetic
View on Amazon: VEVOR 1450W Variable Speed Magnetic Drill Affiliate link
This VEVOR magnetic drill press uses a 1450W motor to deliver 2922 lbf of holding force. It features variable speed control from 0-750 RPM and drills up to 2 inches into steel. The portable design includes a built-in scale for precise measurement. It suits metal fabrication, shipbuilding, and equipment installation where heavy-duty core drilling is required.
Pros
- 2922 lbf magnetic holding force for stability
- 1450W copper motor provides high torque
- Variable speed control from 0-750 RPM
- Built-in scale for accurate hole placement
- Titanium-magnesium alloy guide rail for durability
Cons
- Limited to 2 inch drilling depth
- Not suitable for stainless steel or cast iron
- Requires steel plates at least 10 mm thick
Good fit if
- You need to drill large holes in thick steel plates
- You work in shipbuilding, railways, or power plants
- You require a portable solution for field fabrication
Skip if
- You need to drill into stainless steel or cast iron
- You require a depth greater than 2 inches
- You need a benchtop model for a workshop
Verdict: VEVOR 2" Mag Drill Press is a specialized tool for drilling thick steel plates up to 2 inches deep. It fits professionals in heavy industry who need portable, high-force core drilling capabilities.
Garvee 13-Inch Floor Drill Press
Best for: Mixed material DIY projects
- Motor Power
- 7.5 Amp
- Spindle Speed
- 12-speed, 288-3084 RPM
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
View on Amazon: Garvee 13-Inch Floor Drill Press Affiliate link
This Garvee floor drill press features a 7.5-amp pure copper motor and a 13-inch swing. It offers 12 variable speeds from 288 to 3084 RPM, allowing you to adjust settings for wood or metal. The 5/8-inch chuck capacity and 3.2-inch spindle travel provide ample range for most DIY projects. The cast iron construction and tilting table add stability and flexibility to your workspace.
Pros
- 7.5-amp pure copper motor delivers strong power
- 12 variable speeds from 288 to 3084 RPM
- 13-inch swing offers wide drilling capacity
- Tilting table adds angle flexibility
Cons
- 5/8-inch chuck limits larger bit sizes
- Heavier floor model requires more space
- 12-speed range is narrower than mag drills
Good fit if
- You need a stable floor-standing unit
- You drill frequently in metal and wood
- You prefer a tilting table for angles
Skip if
- You require speeds above 3084 RPM
- You need a compact benchtop design
- You drill holes larger than 5/8 inch
Verdict: Garvee 13 in Floor Drill Press fits users who need a sturdy, high-power unit for mixed materials. It suits those who value a tilting table and do not need extreme high-speed capabilities.
Specifications side by side
| Spec | VEVOR 1450W Variable Speed Magnetic Drill | Garvee 13-Inch Floor Drill Press |
|---|---|---|
| Motor Power | 1450W | 7.5 Amp |
| Spindle Speed | 0-750 RPM | 12-speed, 288-3084 RPM |
| Hole Capacity | 2" / 50 mm | 5/8" |
| Swing | not stated | 13 in |
| Spindle Travel | 2" / 50 mm | 3.2" |
| Magnetic Force | 2922 lbf / 13,000 N | not stated |
| Chuck Capacity | not stated | 5/8" |
| Voltage | not stated | 120V |
| Configuration | Magnetic | Benchtop |
| Speed Settings | Variable Speed | Variable Speed |
| Amperage | not stated | 7.5 A |
| Features | not stated | Tilting Table |
| Target Material | Metal | Metal, Wood |
| Design | Portable | not stated |
| Dimensions | 11 × 7.1 × 14.2 inches | 57 × 20.5 × 10 inches |
| Weight | 26.5 pounds | not stated |
| Size | W/ 2 in 6 pieces - Tapping (NEW) | 13 in Floor Copper Motor Drill Press |
| Color | Orange W/ 2" 6pcs | not stated |
| Model | 8880E | 01 |
Frequently asked questions
Can the VEVOR magnetic drill press tilt its table?
No, the VEVOR unit does not feature a tilting table. It is a portable magnetic drill designed for attaching directly to flat steel surfaces. This configuration allows for drilling in horizontal or inverted positions on heavy plates, but it lacks the adjustable angle capabilities found in traditional floor or benchtop models.
What is the maximum drilling capacity of the VEVOR model?
The VEVOR magnetic drill press has a core drilling capacity of 2 inches. It is engineered for thick steel plates, making it suitable for heavy industry tasks. This depth allows you to drill substantial holes in metal without needing to reposition the workpiece frequently, provided the material is ferrous.
Does the Garvee drill press work on wood?
Yes, the Garvee 13-inch floor drill press is designed for mixed materials, including wood and metal. Its variable speed settings and 7.5-amp motor provide the versatility needed for different workpieces. This makes it a practical choice for DIY projects that require switching between woodworking and light metalworking tasks.
How heavy is the VEVOR magnetic drill?
The VEVOR magnetic drill weighs 26.5 pounds. This weight contributes to its stability when magnetically attached to steel surfaces. While portable, its substantial mass helps maintain balance during high-torque operations, ensuring consistent performance when drilling into thick metal plates on-site.
Is the Garvee press a benchtop or floor model?
The Garvee press is listed as a floor model, despite some attribute data suggesting benchtop configuration. It stands at 57 inches in length and 10 inches in height. This larger footprint provides a stable base for the 13-inch swing, offering more workspace than typical compact benchtop units.
What voltage do these drill presses require?
The Garvee drill press operates on 120V power. Specific voltage data for the VEVOR magnetic drill is not provided in the specifications. You should verify your workshop power supply matches the requirements of your chosen tool before installation. Standard household outlets typically support the Garvee unit.
Which machine is better for portable field work?
The VEVOR magnetic drill is better for portable field work. Its design allows it to attach securely to steel plates, enabling drilling in horizontal or inverted positions. This portability is essential for on-site fabrication or repair tasks where moving large workpieces is difficult or impossible.
Does the Garvee press have variable speed control?
Yes, the Garvee 13-inch floor drill press features variable speed settings. This allows you to adjust the rotation rate for different materials, such as wood or metal. Variable speed control helps you achieve cleaner holes and extends the life of your drill bits by matching the speed to the task.