VEVOR Mag Drill Press vs VEVOR Benchtop Drill Press: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the vevor mag drill press vs benchtop drill press, you face two distinct tools for different jobs. Both units come from VEVOR and are built for drilling metal. The main difference lies in their design and power source. One is a portable magnetic unit for heavy steel work, while the other is a stationary benchtop machine for general-purpose drilling in wood and metal. Your choice depends on where you drill and what materials you handle most often.
Key differences
| Aspect | VEVOR 1300W Portable Magnetic Drill Press | VEVOR 10-Inch 5-Speed Benchtop Drill Press |
|---|---|---|
| Configuration | Magnetic | Benchtop |
| Motor Power | 1300W | 3.2A |
| Spindle Speed | 810 RPM | 5-speed (650 to 3100 RPM) |
| Swing | not listed | 10 in |
| Target Material | Metal | Metal, Wood |
Which one should you choose?
Choose VEVOR 1300W Portable Magnetic Drill Press if
- You need to drill thick steel plates in the field.
- You require a tool that attaches to magnetic surfaces.
- You prioritize high torque for large diameter boring.
Choose VEVOR 10-Inch 5-Speed Benchtop Drill Press if
- You drill a variety of materials like wood and metal.
- You need adjustable speeds for different drill bits.
- You want a stationary unit for a workshop bench.
Verdict: The magnetic drill is the clear choice for portable, high-power steel fabrication. The benchtop press is better for general workshop tasks requiring speed variety and wood compatibility. Select the one that matches your primary material and workspace.
Mag vs Benchtop Drill Press
Configuration
The VEVOR 1300W Portable Magnetic Drill Press uses a magnetic base to anchor directly to metal surfaces. This design makes it highly portable and ideal for fixed structures like steel beams or pipes. You can use it at any angle. In contrast, the VEVOR 10-Inch 5-Speed Benchtop Drill Press features a cast iron frame and column. It is a stationary tool designed to sit on a workbench. You must clamp or bolt it down. The magnetic unit offers mobility for on-site work, while the benchtop model provides a stable, fixed platform for workshop tasks.
Motor Wattage
Power output differs significantly between these two tools. The magnetic drill lists a 1300W copper motor, generating substantial force for heavy-duty metal drilling. It handles tough materials with high driving force. The benchtop drill specifies a 3.2A induction motor. While the amperage is provided, the wattage is not explicitly stated in the data. Generally, 3.2A translates to roughly 384W at standard voltage. The magnetic drill’s higher wattage suggests it is built for more aggressive, high-torque applications on thick steel, whereas the benchtop unit is suited for standard drilling tasks in wood and thinner metals.
Hole Capacity
Drilling capacity varies based on the tool type. The magnetic drill press has a maximum boring diameter of 1.57 inches, or 40mm, using core drills. It also features a coring depth of 50mm. The benchtop drill press has a 10-inch swing, which indicates the maximum diameter of material it can accommodate around the spindle, not necessarily the hole size it can drill. The benchtop model is versatile for various hole sizes using standard bits, while the magnetic drill is specialized for large-diameter core holes in metal. The magnetic unit wins for large-diameter specific tasks.
Speed Settings
Speed control is crucial for different materials. The benchtop drill press offers five adjustable speeds, ranging from 650 to 3100 RPM. This allows you to switch quickly between wood, plastic, and various metal thicknesses. The magnetic drill press runs at a fixed speed of 810 RPM. This single speed is optimized for drilling metal with core bits. If you need versatility across multiple materials requiring different RPMs, the benchtop model is superior. However, for dedicated metal drilling, the fixed 810 RPM on the magnetic unit is sufficient and simpler.
Weight and Portability
Mobility is a key factor for many users. The portable magnetic drill press weighs 24.3 pounds, making it easy to carry to job sites or lift onto structures. Its compact dimensions further aid transport. The benchtop drill press weighs 41.9 pounds and is significantly larger. It is designed to remain stationary on a workbench. The magnetic unit is clearly the better choice for field work or moving between locations. The benchtop model is too heavy and bulky for frequent relocation, requiring a dedicated workspace.
Which VEVOR Drill Press Fits You
Field workers drilling steel beams
You need portability and strong holding power. This magnetic unit weighs 24.3 pounds and provides 2922lbf of magnetic force. It anchors securely to vertical or overhead metal surfaces. The 1300W motor delivers 810 RPM for steady cutting. Its compact 14.2-inch width fits tight spaces where a benchtop press cannot reach.
Shop users drilling wood and metal
You need versatility and speed control. This benchtop model offers five speeds ranging from 650 to 3100 RPM. The 10-inch swing allows you to drill larger diameter holes in various materials. The 3.2A induction motor provides consistent power for workshop tasks. Its cast iron frame ensures stability during precise drilling operations on a workbench.
Users needing deep hole capacity
You require deeper drilling reach. This magnetic drill features a 50mm spindle travel, allowing for deeper holes than standard benchtop units. The 1.57-inch maximum boring diameter handles large core drills. The integrated scale helps you measure depth accurately in millimeters. This design is essential for heavy fabrication where standard press depth is insufficient.
The products compared
VEVOR 1300W Portable Magnetic Drill Press
Best for: drilling large holes in thick steel plates
- Motor Power
- 1300W
- Spindle Speed
- 810 RPM
- Hole Capacity
- 1.57" (40mm)
- Spindle Travel
- 50mm
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
View on Amazon: VEVOR 1300W Portable Magnetic Drill Press Affiliate link
This portable magnetic drill press uses a 1300W motor to deliver 810 RPM for drilling steel. It anchors with 2922 lbf of magnetic force, allowing stable operation at any angle. The 1.57-inch hole capacity and 50mm spindle travel suit heavy metal fabrication. It is ideal for industrial or field work where a benchtop unit is too bulky.
Pros
- 1300W copper motor provides high driving force
- 2922 lbf magnetic base ensures stability at any angle
- 1.57-inch max boring diameter handles large holes
- 810 RPM spindle speed for efficient cutting
Cons
- Lower 810 RPM speed compared to 5-speed benchtop models
- Heavier 24.3-pound build limits easy portability
- Fixed 50mm spindle travel restricts deep drilling
Good fit if
- You need to drill thick steel plates in the field
- You require a stable base for vertical or overhead work
- You are fabricating large structural components
Skip if
- You need high-speed drilling for small hardware
- You require deep hole capacity beyond 50mm
- You are working on thin sheet metal
Verdict: VEVOR 1.57" Portable Mag Drill Press is a heavy-duty tool for steel fabrication. It fits users who need strong magnetic anchoring for large holes on thick metal.
VEVOR 10-Inch 5-Speed Benchtop Drill Press
Best for: General metal and wood drilling tasks
- Motor Power
- 3.2A
- Spindle Speed
- 5-speed, 650–3100 RPM
- Swing
- 10 in
- Configuration
- Benchtop
- Amperage
- 3.2 A
- Features
- Tilting Table
View on Amazon: VEVOR 10-Inch 5-Speed Benchtop Drill Press Affiliate link
This VEVOR benchtop drill press features a 3.2A induction motor and a 10-inch swing capacity. It offers five adjustable speeds ranging from 650 to 3100 RPM. The cast iron frame provides stability for drilling metal and wood. You get precise hole placement with high locking strength. This machine suits DIYers needing reliable power and durability for various materials.
Pros
- 3.2A induction motor delivers ample power for metal and wood
- Five-speed settings range from 650 to 3100 RPM
- 10-inch swing capacity handles larger workpieces
- Cast iron frame ensures stability and durability
Cons
- 10-inch swing limits capacity for wider materials
- Heavier build at 41.9 pounds reduces portability
- Lower maximum speed of 3100 RPM compared to mag drills
Good fit if
- You need a stable benchtop unit for metal and wood
- You require five speed options for different materials
- You value cast iron durability for long-term use
Skip if
- You need to drill large diameter holes in thick steel
- You require high-speed operations above 3100 RPM
- You prefer a lightweight portable tool under 30 pounds
Verdict: VEVOR Benchtop Drill Press 10-Inch Swing is a sturdy option for users who prioritize stability and variable speeds for general metal and wood drilling tasks. It fits those who need a reliable benchtop machine with a moderate swing capacity.
Specifications side by side
| Spec | VEVOR 1300W Portable Magnetic Drill Press | VEVOR 10-Inch 5-Speed Benchtop Drill Press |
|---|---|---|
| Motor Power | 1300W | 3.2A |
| Spindle Speed | 810 RPM | 5-speed, 650–3100 RPM |
| Hole Capacity | 1.57" (40mm) | not stated |
| Swing | not stated | 10 in |
| Spindle Travel | 50mm | not stated |
| Magnetic Force | 2922lbf / 13000N | not stated |
| Configuration | Magnetic | Benchtop |
| Amperage | not stated | 3.2 A |
| Features | not stated | Tilting Table |
| Motor Wattage | 1300W | not stated |
| Target Material | Metal | Metal, Wood |
| Design | Portable | not stated |
| Dimensions | 4.7 × 14.2 × 10.6 inches | 17.5 × 9.3 × 28.7 inches |
| Weight | 24.3 pounds | 41.9 pounds |
| Size | w/ 1.6'' | 19.29×11.81×29.33 in |
| Color | Black | Black+orange |
| Model | 8840 | DP1006L |
Frequently asked questions
What is the main difference between a VEVOR magnetic drill press and a benchtop drill press?
The primary difference is the mounting method. The magnetic model anchors directly to steel surfaces using powerful magnets, allowing for portable use on beams or pipes. The benchtop model is a stationary unit designed to be bolted to a workbench. This makes the benchtop version more stable for repetitive tasks, while the magnetic unit offers flexibility for fieldwork.
Which VEVOR drill press is better for drilling thick steel plates?
The VEVOR 1300W Portable Magnetic Drill Press is better for thick steel plates. It features a 1300W motor and strong magnetic anchoring designed for heavy-duty fabrication. This unit is built to handle large holes in thick metal structures. The benchtop option is less suited for this specific heavy industrial application due to its stationary design and lower power rating.
Can I use the VEVOR benchtop drill press on wood?
Yes, the VEVOR 10-Inch Benchtop Drill Press is suitable for wood. Its specifications list wood as a target material alongside metal. The five-speed settings allow you to adjust the rotation for different wood types. This versatility makes it a good choice for general workshop tasks where you switch between materials frequently.
How heavy is the VEVOR magnetic drill press compared to the benchtop model?
The VEVOR magnetic drill press weighs 24.3 pounds, making it significantly lighter than the benchtop model. The benchtop drill press weighs 41.9 pounds. This weight difference reflects their designs. The magnetic unit is portable, while the benchtop unit requires a stable surface. You should consider your workspace when choosing between the two weights.
What is the swing capacity of the VEVOR benchtop drill press?
The VEVOR benchtop drill press has a 10-inch swing capacity. This measurement indicates the maximum diameter of a hole you can drill in the center of a workpiece. It is adequate for general metal and wood drilling tasks. The magnetic drill press does not list a swing capacity, as it drills through existing surfaces rather than centering on a stock piece.
Does the VEVOR benchtop drill press offer variable speed settings?
Yes, the VEVOR benchtop drill press offers five speed settings. This allows you to adjust the rotation speed based on the material you are drilling. Faster speeds work well for wood, while slower speeds are better for metal. The magnetic drill press does not specify variable speeds in its data, focusing instead on its high wattage for steel fabrication.
Is the VEVOR magnetic drill press portable enough for field use?
Yes, the VEVOR magnetic drill press is designed for portability. It weighs 24.3 pounds and features a compact design for easy transport. You can anchor it to vertical or overhead metal surfaces in the field. This makes it ideal for construction sites or large steel structures where a stationary benchtop unit cannot be used.