VEVOR Mag Drill Press or VEVOR 1680W MD50 Magnetic Drill? Which VEVOR Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the vevor mag drill press vs 1680w md50 magnetic drill, you find two portable tools for heavy steel work. Both models use strong electromagnetic bases to anchor securely to vertical or overhead surfaces. The main difference lies in their power and capacity. The MD50 offers higher motor wattage and a larger boring diameter. The other model provides higher spindle speeds and a slightly stronger magnetic hold. You must choose based on your specific hole size and speed requirements.
Key differences
| Aspect | VEVOR 2-Inch Magnetic Drill Press | VEVOR 1300W Portable Magnetic Drill Press |
|---|---|---|
| Motor Power | 1680W | 1300W |
| Maximum Boring Diameter | 2 Inch (50mm) | 1.57 Inch (40mm) |
| Spindle Speed | 300/500 RPM | 810 RPM |
| Spindle Travel | 8.3 inches | 50mm |
| Magnetic Force | 13,000 N | 13,000 N (2922 lbf) |
| Cooling System | Stainless steel cooling pot | Fast heat dissipation design |
Which one should you choose?
Choose VEVOR 2-Inch Magnetic Drill Press if
- You need to drill holes larger than 1.57 inches in thick steel.
- You prefer a higher motor wattage for tougher material penetration.
- You require a deeper spindle travel distance for deeper holes.
Choose VEVOR 1300W Portable Magnetic Drill Press if
- You work with thinner materials and need higher rotational speeds.
- You want a machine with a built-in measurement scale for precision.
- You need a slightly higher magnetic holding force for stability.
Verdict: The MD50 is the better choice for heavy-duty fabrication requiring large diameter holes. The 1300W model suits users who prioritize speed and precision on smaller holes. Both machines provide secure anchoring for various industrial applications.
Power, Speed, and Capacity
Motor wattage
The VEVOR 1680W MD50 Magnetic Drill features a 1680W motor, specifically noted as a 1550W copper motor in its specifications. This higher wattage suggests greater torque potential for demanding steel fabrication tasks. In contrast, the VEVOR 1300W Portable Magnetic Drill Press is equipped with a 1300W copper motor. While both units utilize copper windings for efficiency and heat dissipation, the MD50 model offers significantly more raw power. If your work involves drilling through thick structural steel or requires sustained high-load operation, the extra wattage in the MD50 provides a clear advantage in performance capability.
Drilling capacity
Maximum boring diameter is a critical specification for heavy-duty magnetic drills. The VEVOR 1680W MD50 Magnetic Drill supports a maximum coring diameter of 2 inches, or 50mm. This allows you to cut larger holes in plates and beams without needing to switch to a different tool. The VEVOR 1300W Portable Magnetic Drill Press has a maximum boring diameter of 1.57 inches, or 40mm. This limit is sufficient for many standard applications but restricts you when larger holes are required. For projects involving large-diameter hollow boring bits, the MD50’s 2-inch capacity is the superior choice.
Spindle speed
Spindle speed affects the finish quality and efficiency of the cut depending on the material and bit size. The VEVOR 1300W Portable Magnetic Drill Press operates at a constant 810 RPM. This higher fixed speed can be beneficial for smaller diameter bits or softer metals where faster cutting is desired. The VEVOR 1680W MD50 Magnetic Drill offers speeds of 300 RPM and 500 RPM. While these speeds are lower, they are often preferred for larger diameter coring bits in steel to prevent bit breakage and ensure a clean cut. The MD50’s lower range is better suited for heavy steel, while the 1300W model’s higher speed offers versatility for lighter tasks.
Magnetic force
Holding force determines how securely the drill stays attached to the workpiece, especially on vertical or overhead surfaces. Both models provide robust electromagnetic anchoring. The VEVOR 1680W MD50 Magnetic Drill generates 13,000 Newtons of holding force, which is equivalent to approximately 2,900 pounds-force (lbf). The VEVOR 1300W Portable Magnetic Drill Press also delivers 13,000 Newtons of force, listed as 2,922 lbf. The difference in holding power is negligible, with the 1300W model having a fractionally higher lbf rating. For all practical purposes, both machines anchor equally well, providing stability during intense drilling operations.
Spindle travel
Spindle travel, or the maximum depth of cut, determines how deep you can drill in a single pass. The VEVOR 1680W MD50 Magnetic Drill offers a maximum travelling distance of 8.3 inches, or 210mm. This deep travel is ideal for drilling through thick structural steel or multiple layers of material without needing to withdraw the bit frequently. The VEVOR 1300W Portable Magnetic Drill Press has a maximum coring depth of 50mm, which is approximately 2 inches. This limited travel restricts the depth of holes you can create in a single setup. For thick materials, the MD50’s extended spindle travel is a significant functional advantage.
Choose the right VEVOR magnetic drill
You need to drill large 2-inch holes
The VEVOR 1680W MD50 Magnetic Drill handles a 2-inch maximum coring diameter. This larger capacity suits heavy fabrication work where bigger holes are standard. Its 1680W motor provides the torque needed for these larger cuts. The 8.3-inch spindle travel allows for deeper holes in thick steel plates without changing bits.
You prefer faster drilling speeds
The VEVOR 1300W Portable Magnetic Drill Press reaches 810 RPM. This speed is significantly higher than the 300 to 500 RPM range of the other model. Faster rotation helps you complete holes in thinner materials more quickly. The 1300W motor supports this speed while maintaining stability during high-RPM operations on metal surfaces.
You want precise depth measurement
This model includes a scale on the frame to measure distance in millimeters. This feature helps you pinpoint the exact depth of each hole. Accurate measurements reduce material waste and improve consistency across multiple projects. The titanium magnesium alloy guide rail also offers corrosion resistance, adding durability to the precision mechanisms.
The products compared
VEVOR 2-Inch Magnetic Drill Press
Best for: portable steel fabrication and large hole drilling
- Motor Power
- 1680W (1550W copper motor)
- Spindle Speed
- 300 RPM, 500 RPM
- Hole Capacity
- 2 Inch (50mm)
- Spindle Travel
- 8.3"/210mm
- Magnetic Force
- 2900 LBS (13,000 N)
- Configuration
- Magnetic
View on Amazon: VEVOR 2-Inch Magnetic Drill Press Affiliate link
The VEVOR MD50 is a portable magnetic drill press designed for heavy-duty steel fabrication. It features a 1680W motor delivering 500 RPM and a 13,000 N magnetic holding force. You get a 2-inch hole capacity with 8.3 inches of spindle travel. The unit includes a 500ml cooling pot and a stainless steel base. This setup suits industrial tasks where portability and strong anchoring matter.
Pros
- 1680W motor reaches 500 RPM for tough materials
- 13,000 N magnetic force secures the drill firmly
- 2-inch maximum boring diameter for large holes
- Includes 500ml rust-proof cooling pot
- Ergonomic handle with nonslip rubber crank grips
Cons
- Compatible only with hollow boring bits, not annular bits
- Heavier and bulkier than standard benchtop drill presses
- Limited to vertical or horizontal mounting on steel surfaces
Good fit if
- You need to drill large holes in fixed steel structures
- You require a portable tool for on-site fabrication
- You work in industrial environments like shipbuilding or railways
Skip if
- You need to drill holes in wood or non-magnetic materials
- You prefer using standard annular cutters for precision
- You want a stationary benchtop unit for a workshop
Verdict: The VEVOR MD50 2-Inch Magnetic Drill delivers high holding power and speed for steel work. You should choose this model if you need portable, high-capacity drilling for industrial fabrication tasks.
VEVOR 1300W Portable Magnetic Drill Press
Best for: heavy-duty steel fabrication and industrial installation
- Motor Power
- 1300W
- Spindle Speed
- 810 RPM
- Hole Capacity
- 1.57" (40mm)
- Spindle Travel
- 50mm
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
View on Amazon: VEVOR 1300W Portable Magnetic Drill Press Affiliate link
This VEVOR magnetic drill press features a 1300W motor and delivers 810 RPM spindle speed. It generates 2922 lbf of holding force to anchor securely to metal surfaces. The unit supports a maximum boring diameter of 1.57 inches with a 50 mm spindle travel. Its portable design weighs 24.3 pounds. This tool suits users needing reliable power for steel fabrication, shipbuilding, or industrial equipment installation.
Pros
- 1300W copper motor provides strong driving force for tough materials
- 2922 lbf magnetic force ensures stable operation at any angle
- Built-in millimeter scale on the frame aids in precise hole placement
- Titanium magnesium alloy guide rail offers corrosion and wear resistance
Cons
- Lower spindle speed of 810 RPM compared to the 300 RPM alternative
- Smaller 1.57 inch hole capacity limits large coring applications
- Heavier 24.3 pound build reduces portability for some users
Good fit if
- You need high holding force for vertical or overhead drilling
- You require a portable unit for on-site steel fabrication
- You work with materials requiring moderate boring diameters
Skip if
- You require high-speed drilling for small diameter holes
- You need to drill holes larger than 1.57 inches
- You prefer a lighter unit for frequent carrying
Verdict: VEVOR Mag Drill Press 1300W delivers robust magnetic holding force and a powerful 1300W motor for heavy-duty metal work. It fits professionals who prioritize stability and power over high-speed precision or large hole capacities.
Specifications side by side
| Spec | VEVOR 2-Inch Magnetic Drill Press | VEVOR 1300W Portable Magnetic Drill Press |
|---|---|---|
| Motor Power | 1680W (1550W copper motor) | 1300W |
| Spindle Speed | 300 RPM, 500 RPM | 810 RPM |
| Hole Capacity | 2 Inch (50mm) | 1.57" (40mm) |
| Spindle Travel | 8.3"/210mm | 50mm |
| Magnetic Force | 2900 LBS (13,000 N) | 2922lbf / 13000N |
| Configuration | Magnetic | Magnetic |
| Motor Wattage | not stated | 1300W |
| Target Material | not stated | Metal |
| Design | not stated | Portable |
| Cutting Capacity | 2-Inch | not stated |
| Dimensions | 10.5 × 3 × 11.5 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 19.3 pounds | 24.3 pounds |
| Size | 2 in | w/ 1.6'' |
| Color | Black | Black |
| Model | 1680W MD50 Magnetic Drill | 8840 |
Frequently asked questions
Which VEVOR magnetic drill has the larger cutting capacity?
The VEVOR 1680W MD50 Magnetic Drill offers a larger cutting capacity. It features a 2-inch maximum coring diameter for steel work. This makes it suitable for heavy fabrication tasks requiring bigger holes. The other model, the VEVOR 1300W Portable Magnetic Drill, has a smaller size specification of 1.6 inches. Choose the 2-inch model if you need to drill larger holes in metal.
What is the difference in motor power between the two models?
The VEVOR 1680W MD50 Magnetic Drill has a 1680W motor. The VEVOR 1300W Portable Magnetic Drill features a 1300W motor. The higher wattage in the MD50 suggests greater torque potential for demanding steel fabrication tasks. You should choose the 1680W model if you prioritize power for heavy-duty metal work. The 1300W model provides robust holding force with less power.
Which VEVOR mag drill is better for portable steel fabrication?
The VEVOR 1680W MD50 Magnetic Drill is ideal for portable steel fabrication. It delivers high holding power and speed for large hole drilling. You should choose this model if you need portable, high-capacity drilling for industrial fabrication tasks. It is designed for professionals who require versatility and power in a portable package. The other model focuses more on stability for heavy-duty installation.
How do the dimensions compare for the VEVOR magnetic drills?
The VEVOR 1680W MD50 Magnetic Drill measures 10.5 inches in length, 3 inches in width, and 11.5 inches in height. The VEVOR 1300W Portable Magnetic Drill is 4.7 inches in length, 14.2 inches in width, and 10.6 inches in height. The MD50 is taller and longer but narrower. The 1300W model is wider but shorter. Consider your storage space and workspace constraints when choosing.
Is the VEVOR 1300W model suitable for industrial installation?
Yes, the VEVOR 1300W Portable Magnetic Drill is suitable for industrial installation. It delivers robust magnetic holding force and a powerful 1300W motor for heavy-duty metal work. It fits professionals who prioritize stability and power over high-speed precision or large hole capacities. You should choose this model if you need a reliable tool for fixed or semi-fixed industrial tasks.
What color options are available for these VEVOR magnetic drills?
The VEVOR 1680W MD50 Magnetic Drill comes in a silver color. The VEVOR 1300W Portable Magnetic Drill is available in black. These are the only color specifications provided for each model. Your choice may depend on personal preference or visibility needs in your workspace. Both models maintain a professional appearance suitable for industrial environments.
Which VEVOR magnetic drill weighs less?
The VEVOR 1300W Portable Magnetic Drill weighs 24.3 pounds. The weight of the VEVOR 1680W MD50 Magnetic Drill is not specified in the data. If portability is a key factor, the 1300W model has a known weight for easier handling. You should verify the weight of the MD50 if you need to carry it frequently. The 1300W model offers a specified weight for planning your transport.