VEVOR 1200W 1.5-Inch Magnetic Drill Alternatives: 6 Similar Picks Compared

How alternatives compare to VEVOR

VEVOR 1200W Magnetic Drill Press

This VEVOR model offers a slightly larger 1.6-inch boring diameter compared to the original 1.5-inch capacity. It shares the same 1200W motor power but adds variable speed control, which the original lacks. The holding force is sufficient for mild steel tasks, though specific lbf ratings are not listed. It weighs 25.6 pounds, making it slightly heavier than the original 23.4-pound unit. You should choose this pick if budget pricing and adjustable speed are more important to you than maximum hole size or fixed-speed simplicity. The yellow finish distinguishes it visually from the original black and orange model.

VEVOR 1450W Variable Speed Magnetic Drill

This VEVOR variant steps up to a 1450W motor, providing more power than the original 1200W unit. It supports a 2-inch boring diameter, significantly larger than the original 1.5-inch limit. Variable speed settings allow for greater precision on different materials. The unit weighs 26.5 pounds, which is heavier than the original. It is designed for large diameter holes in thick steel plates. You should select this premium option if your work requires the largest possible hole capacity and you need variable speed flexibility. The increased power and size make it ideal for heavy steel fabrication where the original might struggle with larger cores.

VEVOR 1.6-Inch Variable Speed Magnetic Drill Press

This VEVOR model features a 1450W motor, exceeding the original 1200W specification. It offers variable speed control, a feature absent in the original fixed-speed drill. The 1.6-inch boring diameter is slightly larger than the original 1.5-inch capacity. Weighing 26.5 pounds, it is heavier than the original unit. It is built for heavy-duty structural steel drilling. You should pick this model if you prioritize robust power and precise speed control for structural work over the original's simpler design. The variable speed allows for better chip removal and tool life when working with tougher materials compared to the fixed 900 RPM of the original.

VEVOR 1300W Portable Magnetic Drill Press

This VEVOR model uses a 1300W motor, which is more powerful than the original 1200W unit. It supports a 1.57-inch boring diameter, slightly larger than the original 1.5-inch limit. The design is portable, similar to the original, but it lacks variable speed settings. It weighs 24.3 pounds, close to the original weight. This pick is ideal for heavy steel fabrication where magnetic strength is key. You should choose this if you need slightly more power and a marginally larger hole capacity without the complexity of variable speed controls. It serves as a robust alternative for users who prioritize holding power and portability over speed adjustability.

ZELCAN 1550W 2-Inch Magnetic Drill Press

The Zelcan model features a 1550W motor, significantly more powerful than the original 1200W VEVOR. It supports a 2-inch cutting capacity, double the original 1.5-inch limit. However, it weighs 45.9 pounds, which is nearly double the weight of the original 23.4-pound unit. It lacks variable speed settings, similar to the original. This heavy-duty option is best for users who prioritize maximum hole size and holding force over portability. You should pick this if you are working in a fixed location and need to drill large holes in thick steel plates where the original's capacity would be insufficient. The substantial weight ensures stability during heavy cuts.

VEVOR Low Profile Magnetic Drill Press

This VEVOR low profile model uses a 1300W motor, offering more power than the original 1200W unit. It has a 1.38-inch boring diameter, which is smaller than the original 1.5-inch capacity. The key difference is its compact height of 8.3 inches, compared to the original 14.8 inches. It weighs 23.2 pounds, nearly identical to the original. This pick is designed for tight spaces with low clearance. You should choose this model if you must drill in confined areas where standard drills cannot fit. It sacrifices some hole capacity for the ability to access restricted spaces, making it ideal for structural steel work in tight quarters.

Quick picks

Our 7 picks

1 Best overall

VEVOR 1200W 1.5-Inch Magnetic Drill Press

Best for: Stable drilling on vertical metal surfaces

Motor Power

1200W

Spindle Speed

900 RPM

Hole Capacity

1.5"

Magnetic Force

2248 lbf / 10000 N

Chuck Capacity

Weldon Shank

Configuration

Magnetic

View on Amazon: VEVOR 1200W 1.5-Inch Magnetic Drill Press Affiliate link

This VEVOR magnetic drill press features a 1200W motor and 2248 lbf holding force. It drills up to 1.5 inches with a fixed 900 RPM speed. The unit includes depth scales and overload protection. It suits users needing stable drilling on vertical or sloped metal surfaces. The compact design fits various industrial and construction tasks.

Pros

• 1200W motor for efficient drilling
• 2248 lbf magnetic force for secure hold
• Built-in depth control scales
• Overload shut-off for safety

Cons

• Fixed 900 RPM speed lacks variable control
• 1.5-inch boring diameter is smaller than competitors
• Heavier build at 23.4 pounds

Good fit if

• You need reliable performance on vertical surfaces
• You require precise depth adjustments
• You drill steel in industrial settings

Skip if

• You need variable speed control
• You require drilling larger than 1.5 inches
• You prefer a lighter portable unit

Verdict: VEVOR 1200W 1.5" Mag Drill offers strong holding power and precise depth control for steady drilling on metal. It fits users prioritizing stability and safety features over variable speed flexibility.

2 Best budget

VEVOR 1200W Magnetic Drill Press

Best for: Budget mild steel fabrication tasks

Motor Power

1200W

Spindle Speed

0-850 RPM, 10-speed

Hole Capacity

1.6 in (40 mm)

Spindle Travel

2 in (50 mm)

Magnetic Force

2810 lbf (12500 N)

Configuration

Magnetic

View on Amazon: VEVOR 1200W Magnetic Drill Press Affiliate link

The VEVOR 1.6-inch magnetic drill features a 1200W motor and 2810 lbf holding force. It drills steel plates 10 mm or thicker with a 0-850 RPM variable speed range. The 10-speed gearbox allows precise control for different hole sizes. You get 2 coring bits included. This unit weighs 25.6 pounds and measures 15 inches tall. It suits fabrication shops needing reliable vertical drilling power.

Pros

• 1200W copper motor delivers strong drilling torque
• 2810 lbf electromagnetic base anchors securely
• 10-speed variable gear control for precision
• Includes 2 coring bits for immediate use

Cons

• Lower 1200W motor power compared to 1450W+ competitors
• 1.6-inch capacity is smaller than 2-inch options
• Not suitable for stainless steel or cast iron

Good fit if

• You need a budget-friendly option for mild steel
• You require variable speed control for accuracy
• You drill plates thicker than 10 mm

Skip if

• You must drill stainless steel or cast iron
• You need a 2-inch maximum boring diameter
• You require a motor exceeding 1200W

Verdict: VEVOR 1.6-Inch 1200W Magnetic Drill offers solid holding force for mild steel fabrication. It fits users who prioritize variable speed control and budget pricing over maximum hole capacity.

3 Also great

VEVOR 1450W Variable Speed Magnetic Drill

Best for: Large diameter holes in thick steel plates

Motor Power

1450W

Spindle Speed

0-750 RPM

Hole Capacity

2" / 50 mm

Spindle Travel

2" / 50 mm

Magnetic Force

2922 lbf / 13,000 N

Configuration

Magnetic

View on Amazon: VEVOR 1450W Variable Speed Magnetic Drill Affiliate link

This VEVOR magnetic drill press features a 1450W motor and 2922 lbf holding force. It drills up to 2-inch holes at 0-750 RPM. The unit includes 10 speed settings and a built-in scale for precision. It weighs 26.5 pounds and measures 11 by 7.1 by 14.2 inches. You should use it on steel plates at least 0.39 inches thick for heavy fabrication tasks.

Pros

• 2922 lbf magnetic holding force for stability
• 2-inch maximum boring diameter capacity
• 1450W copper motor for high torque
• Built-in scale for precise measurement
• 10-speed variable settings for control

Cons

• 2-inch spindle travel limits deep hole drilling
• Not suitable for stainless steel or cast iron
• Requires steel plates at least 0.39 inches thick

Good fit if

• You need to drill large 2-inch holes in thick steel
• You work on vertical or horizontal surfaces requiring high holding force
• You value precise depth measurement via the built-in scale

Skip if

• You frequently drill into stainless steel or cast iron
• You need to drill holes deeper than 2 inches
• You require a drill for plates thinner than 0.39 inches

Verdict: VEVOR 1450W 2-Inch Magnetic Drill offers the largest boring capacity on this list for heavy steel work. It fits fabricators who need maximum hole size and secure anchoring on thick materials.

4 Also great

VEVOR 1.6-Inch Variable Speed Magnetic Drill Press

Best for: heavy-duty structural steel drilling

Motor Power

1450W

Spindle Speed

0-800 RPM (10-speed)

Hole Capacity

1.6 in (40 mm)

Spindle Travel

2 in / 50 mm

Magnetic Force

2810 lbf / 12500 N

Configuration

Magnetic

View on Amazon: VEVOR 1.6-Inch Variable Speed Magnetic Drill Press Affiliate link

This VEVOR magnetic drill features a 1450W motor and delivers 2810 lbf of holding force. It bores holes up to 1.6 inches in diameter with a 2-inch depth capacity. The unit offers 10 variable speed settings and weighs 26.5 pounds. It includes a millimeter scale for precision and a titanium magnesium alloy guide rail. You should use it for steel plates at least 0.39 inches thick.

Pros

• 1450W copper motor provides high torque
• 2810 lbf magnetic holding force
• 10-speed variable speed control
• Built-in millimeter measurement scale
• Titanium magnesium alloy guide rail

Cons

• 1.6-inch capacity is smaller than some competitors
• Not suitable for stainless steel or cast iron
• Requires steel plate thickness of at least 0.39 inches

Good fit if

• You need strong holding force for vertical work
• You require variable speed for different materials
• You are drilling into thick structural steel

Skip if

• You need to drill through stainless steel
• You require a capacity larger than 1.6 inches
• You are working with steel thinner than 0.39 inches

Verdict: The VEVOR 1450W 1.6 in Magnetic Drill offers robust power and precise speed control for heavy-duty steel fabrication. It fits users who prioritize magnetic stability and variable speed settings for structural steel work.

5 Also great

VEVOR 1300W Portable Magnetic Drill Press

Best for: heavy steel fabrication and structural work

Motor Power

1300W

Spindle Speed

810 RPM

Hole Capacity

1.57" (40mm)

Spindle Travel

50mm

Magnetic Force

2922lbf / 13000N

Configuration

Magnetic

View on Amazon: VEVOR 1300W Portable Magnetic Drill Press Affiliate link

This VEVOR magnetic drill features a 1300W motor and delivers 2922 lbf of holding force. It bores holes up to 1.57 inches in diameter at 810 RPM. The unit weighs 24.3 pounds and measures 14.2 by 10.6 by 4.7 inches. It includes a metric scale for precise depth control. This tool suits users needing strong magnetic adhesion for vertical or overhead metal drilling tasks.

Pros

• 1300W copper motor for high torque
• 2922 lbf magnetic holding force
• Metric depth scale for accuracy
• Titanium magnesium alloy guide rail

Cons

• 1.57 inch max boring diameter is smaller than 2 inch alternatives
• 810 RPM speed is lower than variable speed models
• No variable speed control listed in specs

Good fit if

• You need strong magnetic force for thick steel
• You work on vertical or overhead surfaces
• You require a portable unit under 25 pounds

Skip if

• You need to drill holes larger than 1.57 inches
• You require variable speed control for different materials
• You prefer a low-profile design under 10 inches tall

Verdict: VEVOR 1300W 1.57" Magnetic Drill offers robust holding power for heavy-duty metal work. It fits users who prioritize magnetic strength and portability over high-speed versatility.

6 Best 1550w

ZELCAN 1550W 2-Inch Magnetic Drill Press

Best for: Heavy-duty 2-inch steel drilling

Motor Power

1550W

Spindle Speed

650 rpm

Hole Capacity

2"

Spindle Travel

2"

Magnetic Force

3125 lbf / 13900N

Configuration

Magnetic

View on Amazon: ZELCAN 1550W 2-Inch Magnetic Drill Press Affiliate link

The ZELCAN 1550W magnetic drill press delivers 3125 lbf of holding power and bores holes up to 2 inches in diameter. It features a 650 rpm spindle speed and includes six drill bits. The 16.9 fl. oz. coolant tank helps manage heat during extended use. This unit suits professionals needing high torque and capacity for steel fabrication or heavy industrial work.

Pros

• 1550W motor provides strong drilling power
• 3125 lbf magnetic force for secure anchoring
• 2-inch hole capacity for larger tasks
• Includes six drill bits for immediate use
• 16.9 fl. oz. coolant tank for heat management

Cons

• Heavier at 45.9 pounds than lighter competitors
• Single spindle speed of 650 rpm limits variable control
• No mention of stepless speed adjustment in specs

Good fit if

• You need to bore large holes up to 2 inches in diameter
• You work on heavy steel fabrication or industrial projects
• You require high magnetic holding force for vertical drilling

Skip if

• You need variable speed control for delicate materials
• You require a lightweight unit for frequent travel
• You primarily drill small holes under 1.5 inches

Verdict: ZELCAN 1550W Magnetic Drill Press offers high capacity and power for heavy-duty steel work. It fits users who prioritize hole size and holding force over variable speed settings.

7 Best premium

VEVOR Low Profile Magnetic Drill Press

Best for: drilling in tight spaces with low clearance

Motor Power

1300 W

Spindle Speed

650 RPM

Hole Capacity

1.4 in (35 mm)

Magnetic Force

2248 lbf / 10000 N

Chuck Capacity

Weldon Shank

Configuration

Magnetic

View on Amazon: VEVOR Low Profile Magnetic Drill Press Affiliate link

This VEVOR magnetic drill press features a 1300 W motor and 2248 lbf holding force. Its low profile design measures 8.3 inches in height, fitting into tight spaces. The 1.4 inch boring diameter handles core drilling tasks with a 650 RPM spindle speed. It includes a Weldon shank chuck. This unit suits users needing portability for vertical or sloped metal surfaces.

Pros

• Low profile height of 8.3 inches for tight spaces
• Strong 2248 lbf magnetic force for secure attachment
• 1300 W motor provides efficient drilling power
• Compact weight of 23.2 pounds for easy transport

Cons

• 1.4 inch boring diameter is smaller than competitors
• 650 RPM spindle speed is lower than many models
• Includes only one drill bit in base configuration

Good fit if

• You need to drill in confined or low-clearance areas
• You work on vertical or sloped metal surfaces
• You require a lightweight unit for job site portability

Skip if

• You need to drill holes larger than 1.4 inches
• You require high-speed drilling above 650 RPM
• You prefer a standard height drill press design

Verdict: VEVOR 1300W Low Profile Mag Drill fits users who must drill in tight spaces where standard drills cannot reach. Its compact height and strong magnetic base make it ideal for structural steel work in confined areas.

Specifications side by side

Frequently asked questions

See also

• dewalt 1 2 inch brushless drill driver alternatives
• milwaukee m18 1 2 inch drill driver alternatives