Jet vs WOODERS Benchtop Planers: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing a jet vs WOODERS benchtop planer, you face two distinct approaches to the same task. Both machines offer a 13-inch cutting width suitable for small shops. The primary difference lies in their cutterhead technology. The Jet model uses a helical head with 30 carbide inserts for quieter, smoother cuts. The WOODERS unit relies on a high-speed dual-blade system for raw power and anti-snipe performance.
Key differences
| Aspect | JET 13-Inch Helical Benchtop Thickness Planer | WOODERS 13-Inch Two-Blade Benchtop Planer |
|---|---|---|
| Cutterhead Style | Helical with 30 carbide inserts | Dual-blade HSS system |
| Cutterhead Speed | 9,500 RPM | 10,000 RPM |
| Maximum Stock Thickness | 6 inches | 6.3 inches |
| Motor Power | 2 HP, 15-amp | 2000W, 15-amp |
| Noise Rating | 91 dB | not listed |
| Weight | 66 pounds | 60 pounds |
Which one should you choose?
Choose JET 13-Inch Helical Benchtop Thickness Planer if
- You prefer a quieter operation with a rated 91 dB sound level.
- You want to rotate individual carbide inserts instead of replacing full knives.
- You value a depth stop preset for returning to common thicknesses.
Choose WOODERS 13-Inch Two-Blade Benchtop Planer if
- You need to plane slightly thicker stock up to 6.3 inches.
- You prioritize a higher cutterhead speed of 10,000 RPM for dense hardwoods.
- You want built-in overload protection to safeguard the motor during extreme loads.
Verdict: The Jet planer suits those who value surface finish quality and quieter operation through its helical cutterhead. The WOODERS planer is better for users needing maximum stock thickness and high-speed raw power. Choose based on whether you prioritize cut quality or sheer cutting capacity.
Jet vs WOODERS Planer Specs
Cutterhead technology
The Jet JWP-13BTHH features a helical cutterhead with 30 carbide inserts. This design shears wood for a smoother finish and operates at a quieter 91 dB. You can rotate dull inserts to a fresh edge instead of replacing entire knives. The WOODER PL13-15AB uses a traditional two-blade high-speed steel system. While it claims to eliminate snipe through its infeed structure, it lacks the individual insert rotation capability. The helical head on the Jet generally offers better surface quality and lower noise, making it the superior choice for finish work.
Motor power
Both machines draw 15 amps from a 120V outlet, but their power ratings differ slightly. The Jet specifies a 2 HP motor, while the WOODER lists a 2000W all-copper motor. The WOODER achieves a higher cutterhead speed of 10,000 RPM compared to the Jet’s 9,500 RPM. Higher RPM can sometimes improve finish on softer woods, but the Jet’s 2 HP rating suggests robust torque for dense hardwoods. Both motors are designed to handle solid wood without bogging down. The WOODER also includes built-in overload protection to safeguard the motor during extreme loads, a feature not explicitly listed for the Jet.
Feed rate
The Jet specifies a feed rate of 24.6 FPM (feet per minute). This controlled speed helps ensure consistent material removal across the board width. The WOODER does not list a specific feed rate in its published specifications. Without this data, it is unclear if the WOODER offers variable speed or a fixed rate that matches the Jet. The Jet’s defined feed rate allows you to predict how quickly material is processed. This precision is valuable for maintaining uniform thickness on long boards. The lack of feed rate data for the WOODER makes direct comparison difficult.
Dimensions and weight
The WOODER is more compact and lighter than the Jet. It measures 22.4 inches in length and weighs 60 pounds. The Jet is larger, at 25 inches long, and weighs 66 pounds. The WOODER also has a smaller footprint in width and height, measuring 14.2 by 17.9 inches, compared to the Jet’s 18.3 by 20.9 inches. If bench space is limited, the WOODER’s smaller profile is advantageous. However, the Jet’s heavier weight may provide better stability during operation. The Jet also includes folding tables for supporting longer boards, which the WOODer data does not mention.
Included accessories
The Jet includes five spare carbide inserts, two Torx drivers, a hex driver, a push stick, and a manual. It also comes with a depth stop and an onboard depth-of-cut gauge. The WOODER includes two extra replacement HSS blades in a storage box. It features a high-visibility height indicator but does not list a depth stop preset. The Jet’s inclusion of multiple spare inserts and specialized tools offers more immediate value. The WOODER’s single spare blade set is standard but less comprehensive. The Jet’s depth stop allows for quicker return to common thicknesses.
Which benchtop planer fits your needs
Quiet shop and fine finish seekers
The Jet JWP-13BTHH operates at a rated 91 dB, making it quieter than the standard straight-knife version. Its helical cutterhead with 30 carbide inserts shears wood for a smoother surface. You also get 5 spare inserts, allowing you to rotate dull edges instead of replacing full knife sets. This reduces noise and maintains finish quality.
Users needing raw power and speed
The WOODER model features a 2000W all-copper motor that drives the cutterhead at 10,000 RPM. This high speed helps slice through dense hardwoods like oak or walnut without bogging down. The dual-blade system is paired with an optimized structure to reduce snipe, ensuring boards stay flat and dimensionally accurate from end to end.
Those planning heavy daily use
This planer includes built-in overload protection to safeguard the motor during extreme loads, extending the tool's lifespan. It is constructed with a heavy-duty iron blade shaft and rugged frame for industrial-grade stability. These features help it stay firmly planted on your workbench to reduce vibrations during intense, repetitive planing tasks.
People wanting simple maintenance
The Jet model includes 5 spare carbide inserts with screws and two Torx drivers. When an insert edge dulls, you can rotate it 90 degrees to a fresh edge. This approach is simpler than replacing full knife sets. The package also includes a push stick and manual, providing everything needed for basic upkeep.
The products compared
JET 13-Inch Helical Benchtop Thickness Planer
Best for: Solid wood projects up to 13 inches wide
- Cutting Width
- 13"
- Cutterhead Style
- Helical
- Blade Count
- 30 carbide inserts
- Maximum Stock Thickness
- 6"
- Feed Rate
- 24.6 FPM
- Motor Power
- 2 HP, 15A
View on Amazon: JET 13-Inch Helical Benchtop Thickness Planer Affiliate link
This JET benchtop thickness planer handles stock up to 13 inches wide and 6 inches thick. It uses a helical cutterhead with 30 carbide inserts for smoother cuts and quieter operation at 91 dB. The 2 HP motor runs at 9,500 RPM with a 24.6 FPM feed rate. It suits small shops and hobbyists needing a full-size planer without stationary footprint requirements.
Pros
- Helical cutterhead with 30 carbide inserts reduces noise to 91 dB
- 13-inch cutting width and 6-inch maximum thickness capacity
- Rotate dull inserts 90 degrees instead of replacing full knife sets
- Folding infeed and outfeed tables support longer boards
Cons
- Not suitable for plywood, painted lumber, or reclaimed wood
- Minimum board length of 14 inches restricts short stock
- Stand and dust collector are sold separately
Good fit if
- You need to plane solid hardwoods up to 13 inches wide
- You want a quieter helical cutterhead than straight-knife models
- You have space for a benchtop machine but need full width
Skip if
- You regularly plane plywood or painted boards
- You need to process boards shorter than 14 inches
- You require a complete setup with stand and collector included
Verdict: JET 13" Benchtop Planer, Helical Head delivers full 13-inch capacity in a benchtop form factor, ideal for hobbyists planning solid wood projects up to 6 inches thick.
WOODERS 13-Inch Two-Blade Benchtop Planer
Best for: High-speed planing of wide hardwoods
- Cutting Width
- 13 in
- Blade Count
- 2
- Maximum Stock Thickness
- 6.3 in
- Motor Power
- 15A, 2000W
- Cutterhead Speed
- 10,000 RPM
- Swing
- 13-Inch
View on Amazon: WOODERS 13-Inch Two-Blade Benchtop Planer Affiliate link
This WOODERS benchtop planer features a 15-amp, 2000-watt motor spinning a cutterhead at 10,000 RPM. It handles a 13-inch cutting width and stocks up to 6.3 inches thick. The dual-blade HSS system targets snipe reduction, while overload protection safeguards the motor. Its 60-pound frame provides stability on your workbench for consistent hardwood and softwood finishing.
Pros
- 15-amp 2000W all-copper motor delivers high torque
- 10,000 RPM cutterhead speed for fast material removal
- Dual-edge HSS blade system reduces snipe
- Built-in overload protection safeguards the motor
Cons
- Only includes two HSS blades
- Heavier 60-pound build requires bench space
- Uses standard HSS blades instead of helical carbide
Good fit if
- You need a 13-inch width for wide boards
- You want a high-speed motor for dense hardwoods
- You prefer HSS blades for easy sharpening
Skip if
- You require helical carbide cutterheads
- You need a lighter tool for portability
- You want more than two included blades
Verdict: WOODERS 13" Benchtop Planer suits woodworkers who prioritize raw motor power and high cutterhead speed for dense materials. It fits those who prefer traditional HSS blades and need a stable, heavy-duty machine for wide stock.
Specifications side by side
| Spec | JET 13-Inch Helical Benchtop Thickness Planer | WOODERS 13-Inch Two-Blade Benchtop Planer |
|---|---|---|
| Cutting Width | 13" | 13 in |
| Cutterhead Style | Helical | not stated |
| Blade Count | 30 carbide inserts | 2 |
| Maximum Stock Thickness | 6" | 6.3 in |
| Feed Rate | 24.6 FPM | not stated |
| Motor Power | 2 HP, 15A | 15A, 2000W |
| Cutterhead Speed | 9,500 RPM | 10,000 RPM |
| Voltage | 120V | not stated |
| Swing | not stated | 13-Inch |
| Configuration | Benchtop | Benchtop |
| Amperage | 15 Amp | 15 Amp |
| Target Material | not stated | Wood |
| Application | not stated | Woodworking |
| Dimensions | 25 × 18.3 × 20.9 inches | 22.4 × 14.2 × 17.9 inches |
| Weight | 66 pounds | 60 pounds |
| Color | White | Blue |
| Model | JWP-13BTHH | PL13-15AB |
Frequently asked questions
Which benchtop planer is heavier and more stable?
The Jet model is heavier. It weighs 66 pounds compared to the WOODERS unit at 60 pounds. This extra mass can help dampen vibration during operation. You may find the Jet provides a slightly more stable platform for dense hardwoods due to its weight difference.
How do the physical dimensions compare between the two?
The Jet planer is larger in all directions. It measures 25 inches in length, 20.9 inches in height, and 18.3 inches in width. The WOODER is more compact at 22.4 inches long, 17.9 inches high, and 14.2 inches wide. You will need more floor space for the Jet.
What is the difference in cutterhead technology?
The Jet uses a helical cutterhead with carbide inserts. The WOODERS uses a traditional two-blade setup. Helical heads shear wood for a smoother finish and allow you to rotate dull inserts. Traditional blades require sharpening or replacement when dull. Your choice depends on desired finish quality.
Which machine is better for wide stock?
Both handle 13-inch wide material. The Jet offers full 13-inch capacity in a benchtop form. The WOODERS also features a 13-inch swing. If you need to plane wide boards, either model fits the requirement. Check your specific stock width against the 13-inch limit for both units.
Does the Jet planer have a specific model number?
Yes, the Jet benchtop planer is model JWP-13BTHH. This identifier helps you find replacement parts and manuals. The WOODERS model is PL13-15AB. Knowing these numbers ensures you order the correct accessories for your specific machine configuration.
Which planer is colored blue?
The WOODERS 13-Inch Two-Blade Benchtop Planer is blue. The Jet model does not list a specific color in its primary attributes. If shop aesthetics matter to you, the WOODERS provides a distinct blue finish. The Jet’s color is not specified in the provided data.