Looking Beyond the iMeshbean 1800W 2-Inch Magnetic Drill? 6 Alternatives Worth a Look

How these alternatives compare to iMeshbean

Zinnore 1150W Magnetic Drill Press

The Zinnore 1150W Magnetic Drill Press trades raw power for a smaller footprint. With an 1150W motor, it provides less torque than the iMeshbean’s 1800W unit. However, its width is only 8.54 inches, making it significantly more compact than the iMeshbean’s 11.8-inch design. At 32.3 pounds, it is heavier than the Festisoul but still portable. This model suits users who need versatility in tight spaces rather than heavy industrial capacity. It sacrifices the iMeshbean’s large hole capacity and high holding force for easier maneuverability. Choose this if your work involves light to medium fabrication where space is limited.

Vimke 1400W 2-Inch Magnetic Drill Press

The Vimke 1400W Magnetic Drill Press offers a 2-inch capacity similar to the iMeshbean but with a different form factor. Its height is only 10.6 inches, much lower than the iMeshbean’s 19.5-inch profile. The width is 14.2 inches, making it wider than the original. It features a self-locking chuck, which the iMeshbean data does not mention. This design prioritizes stability and reliable magnetic base performance over maximum speed. It is ideal for structural steel drilling where you need large bits. Select this alternative if you value a low-profile design and secure chucking over the iMeshbean’s higher RPM and cooling pot features.

Festisoul 1550W 2-Inch Magnetic Drill Press

The Festisoul 1550W Magnetic Drill Press provides a balance of power and portability. Its 1550W motor is slightly less powerful than the iMeshbean’s 1800W unit. However, it weighs only 28.8 pounds, making it lighter than the Zinnore. The width is just 6.3 inches, far narrower than the iMeshbean’s 11.8 inches. This compact design aids on-site structural steel fabrication. It gives up some of the iMeshbean’s raw power and large dimensions for easier handling. Choose this model if you prioritize magnetic holding strength and portability over high-speed versatility. It is a practical tool for professionals who move between job sites frequently.

GARVEETECH 2-Inch 1550W Mag Drill Press

The GARVEETECH 2-Inch 1550W Mag Drill Press matches the Festisoul in dimensions and weight. It features a 1550W motor, which is less powerful than the iMeshbean’s 1800W motor. Its width is 6.3 inches, offering a narrower profile than the iMeshbean. This model fits users who prioritize holding power and precision over speed. It is suitable for heavy-duty metalworking where stability is critical. The iMeshbean offers higher RPM and a cooling pot, which this model lacks. Select this alternative if you need a stable, compact drill for precise holes in thick steel. It sacrifices maximum power for a focused, stable drilling experience.

iMeshbean 1550W 2-Inch Magnetic Drill Press

The iMeshbean 1550W Magnetic Drill Press is a lower-power version of the original. It uses a 1550W motor instead of the 1800W unit found in the B0DDWZT5L6 model. The dimensions remain identical, including the 11.8-inch width and 19.5-inch height. It retains the same orange and grey green color scheme. This model offers robust power and safety features for heavy-duty steel drilling. It gives up some rotational speed and torque compared to the 1800W version. Choose this if you want the iMeshbean build quality with slightly less power. It fits users who prioritize holding force and precise speed control over maximum rotational speed.

Garvee 2-Inch 1550W Magnetic Drill Press

The Garvee 2-Inch 1550W Magnetic Drill Press focuses on variable speed precision. It has a 1550W motor, which is less powerful than the iMeshbean’s 1800W unit. The width is 6.3 inches, much narrower than the iMeshbean’s 11.8 inches. It weighs 28.8 pounds, making it portable. This model suits users who need stable feed for moderate drilling tasks. It lacks the iMeshbean’s high-speed capabilities and large magnetic holding force. Select this alternative if you require variable speed control and precision over raw power. It is less suitable if you need the highest speeds or strongest magnetic pull available for heavy structural work.

Quick picks

Our 7 picks

1 Best overall

iMeshbean 1800W 2-Inch Magnetic Drill Press

Best for: Heavy steel structures and large holes

Motor Power

1800W

Spindle Speed

10-speed, 760 RPM

Hole Capacity

2 in

Magnetic Force

3102lbf/13800N

Configuration

Magnetic

Target Material

Metal

View on Amazon: iMeshbean 1800W 2-Inch Magnetic Drill Press Affiliate link

The iMeshbean 1800W magnetic drill press offers a 2-inch boring diameter and 3102 lbf holding force. Its 1800W copper motor runs at 760 RPM with ten adjustable speeds. The base uses a dual-coil design for safety and stability. You get reversible drilling and a cooling pot to extend tool life. This portable unit suits heavy steel work and industrial maintenance tasks.

Pros

• 1800W motor provides strong drilling power
• 3102 lbf magnetic base holds firmly
• 10-step variable speed control
• Reversible function for chip clearing
• Cooling pot protects internal components

Cons

• Lower maximum spindle speed of 760 RPM
• Single speed range limits fine tuning
• No mention of included coring bits

Good fit if

• You need high holding force for thick steel
• You drill large 2-inch holes frequently
• You work on vertical or overhead surfaces

Skip if

• You require high-speed drilling above 760 RPM
• You need a drill for light gauge metal
• You want a complete bit set included

Verdict: The iMeshbean 1800W 2" Magnetic Drill delivers robust power and stability for heavy industrial tasks. It fits professionals who prioritize holding force and motor durability over high-speed versatility.

2 Best premium

Zinnore 1150W Magnetic Drill Press

Best for: versatile drilling and tapping in tight spaces

Motor Power

1150W

Hole Capacity

5/8 in (16 mm)

Magnetic Force

2360 lbs / 10500N

Configuration

Magnetic

Target Material

Metal

Design

Portable

View on Amazon: Zinnore 1150W Magnetic Drill Press Affiliate link

The Zinnore magnetic drill press features a 1150W motor and 2360 lbs of magnetic force. It supports drilling up to 5/8 inch and tapping from M5 to M12. The portable design weighs 32.3 pounds. This unit suits users needing versatile drilling and tapping capabilities in a compact package for metal fabrication or maintenance tasks.

Pros

• 1150W motor provides reliable power for metal work
• 2360 lbs magnetic force ensures stability on vertical surfaces
• Supports both drilling up to 5/8 inch and tapping M5 to M12
• Compact dimensions fit into constrained workspaces

Cons

• Lower magnetic force compared to competitors offering over 3000 lbs
• Smaller 5/8 inch drilling capacity limits larger hole requirements
• 1150W motor is less powerful than 1550W or 1800W alternatives

Good fit if

• You need a machine that handles both drilling and tapping
• You work in tight spaces where portability matters
• You primarily drill holes smaller than 5/8 inch

Skip if

• You require drilling capacities larger than 5/8 inch
• You need maximum magnetic holding force for heavy vertical loads
• You prefer higher power motors for rapid material removal

Verdict: Zinnore 1150W Magnetic Drill Press fits users who prioritize versatility and compact size over raw power and large drilling capacity. It is a practical tool for light to medium fabrication tasks.

3 Also great

Vimke 1400W 2-Inch Magnetic Drill Press

Best for: structural steel drilling with large bits

Motor Power

1400W

Spindle Speed

10-speed, 810 RPM

Hole Capacity

2 in

Magnetic Force

2922 lbf / 13000 N

Configuration

Magnetic

Target Material

Metal

View on Amazon: Vimke 1400W 2-Inch Magnetic Drill Press Affiliate link

The Vimke magnetic drill press offers a 1400W motor and 2-inch boring diameter with 2922 lbf of holding power. It reaches 810 RPM across 10 speeds and features a reversible switch. The dual-coil base and self-locking chuck simplify bit changes. This portable unit suits industrial sites and heavy metal fabrication where reliable torque and secure mounting are essential for your projects.

Pros

• 1400W copper motor delivers steady power for hard materials.
• 2922 lbf magnetic base ensures secure attachment to steel.
• 2-inch boring diameter handles large coring bits.
• Self-locking chuck allows quick bit changes without tools.
• Reversible function aids in clearing chips or removing bits.

Cons

• Lower motor power than the 1550W and 1800W competitors.
• Maximum speed of 810 RPM is slower than higher-end models.
• No variable speed dial; uses a stepless knob for adjustment.

Good fit if

• You need a portable drill with strong magnetic holding force.
• You frequently drill large holes in steel structures.
• You want a tool with a self-locking chuck for efficiency.

Skip if

• You require variable speed control via a digital dial.
• You need the highest possible drilling speed for efficiency.
• You are looking for the most powerful motor in this group.

Verdict: Vimke 1400W 2-Inch Magnetic Drill provides solid holding power and a 2-inch capacity for structural steel work. It fits buyers who prioritize a self-locking chuck and reliable magnetic base over maximum speed or power.

4 Also great

Festisoul 1550W 2-Inch Magnetic Drill Press

Best for: portable structural steel drilling

Motor Power

1550W

Spindle Speed

Up to 750 RPM

Hole Capacity

2 in

Magnetic Force

14000N

Configuration

Magnetic

Target Material

Metal

View on Amazon: Festisoul 1550W 2-Inch Magnetic Drill Press Affiliate link

The Festisoul 1550W Magnetic Drill Press offers a 2-inch drilling capacity with a 14000N magnetic base. It features variable speed up to 750 RPM and weighs 28.8 pounds for portability. This unit suits fabricators needing strong holding power and adjustable speeds. It is a solid option for structural steel work where a secure, portable drill is required.

Pros

• 1550W motor delivers strong torque for tough metalworking tasks
• 14000N magnetic base ensures secure hold on ferrous surfaces
• Variable speed control up to 750 RPM matches material needs
• Weighs only 28.8 pounds for easy job site transport

Cons

• Maximum spindle speed of 750 RPM is lower than competitors
• Does not include coring bits in the standard package
• Single speed range limits high-speed precision work

Good fit if

• You need a lightweight drill under 30 pounds for job sites
• You require high magnetic force for vertical or overhead drilling
• You work with structural steel and need adjustable speeds

Skip if

• You need a drill press that includes coring bits
• You require a maximum speed higher than 750 RPM
• You prefer a unit with a motor power over 1550W

Verdict: Festisoul 1550W Magnetic Drill Press fits professionals who prioritize portability and magnetic holding strength over high-speed versatility. It is a practical tool for on-site structural steel fabrication.

5 Also great

GARVEETECH 2-Inch 1550W Mag Drill Press

Best for: heavy-duty metalworking with high stability needs

Motor Power

1550W

Spindle Speed

0 to 750 RPM

Hole Capacity

2 in

Spindle Travel

Up to 2 inches

Magnetic Force

14,000 N (3,147 lbf)

Configuration

Magnetic

View on Amazon: GARVEETECH 2-Inch 1550W Mag Drill Press Affiliate link

The GarveeTech 1550W magnetic drill press offers a 2-inch boring diameter and 14,000 N holding force. It reaches 750 RPM with a 2-inch spindle travel. The integrated millimeter scale aids precise positioning. You get a portable unit weighing 28.8 pounds with an ergonomic handle. This setup suits metalworking tasks where stability and accuracy matter.

Pros

• 1550W motor delivers high torque for hard materials
• 14,000 N magnetic force ensures secure adhesion
• Integrated millimeter scale improves positioning accuracy
• Titanium-magnesium alloy guide rail resists corrosion

Cons

• Lower top speed of 750 RPM limits efficiency
• Heavier build at 28.8 pounds reduces portability
• No variable speed control mentioned in specs

Good fit if

• You need strong holding force for vertical drilling
• You value precise bit positioning for clean holes
• You work with thick metal plates requiring stability

Skip if

• You require high-speed drilling for rapid production
• You need a lightweight tool for frequent travel
• You prefer variable speed control for delicate work

Verdict: GarveeTech 1550W 2-Inch Magnetic Drill fits users prioritizing holding power and precision over speed. It is a solid choice for heavy-duty metalworking where stability is critical.

6

iMeshbean 1550W 2-Inch Magnetic Drill Press

Best for: Heavy-duty steel structure drilling

Motor Power

1550W

Spindle Speed

10-speed, up to 760 RPM

Hole Capacity

2 in

Magnetic Force

3102 lbf / 13800 N

Configuration

Magnetic

Target Material

Metal

View on Amazon: iMeshbean 1550W 2-Inch Magnetic Drill Press Affiliate link

This iMeshbean magnetic drill press features a 1550W motor and delivers 3102 lbf of holding force. It bores holes up to 2 inches in diameter at speeds up to 760 RPM. The dual-coil base ensures safety with built-in insulation. You get stepless speed control and reversible operation. It includes coring bits for various metal applications. This unit suits professionals needing high torque and stability on steel structures.

Pros

• 1550W copper motor for high-intensity drilling
• 3102 lbf magnetic force for secure hold
• Dual-coil base with insulation protection
• Stepless speed adjustment up to 760 RPM
• Includes coring bits for metal work

Cons

• Lower max speed than competitors reaching 14000N
• Heavier build limits portability compared to lighter models
• No variable speed dial on the base unit

Good fit if

• You need strong holding force on thick steel
• You require stepless speed control for precision
• You drill large holes in structural metal

Skip if

• You need a lightweight drill for overhead work
• You require high-speed drilling above 760 RPM
• You prefer a smaller footprint for tight spaces

Verdict: iMeshbean 1550W Magnetic Drill Press offers robust power and safety features for heavy-duty steel drilling. It fits users who prioritize holding force and precise speed control over maximum rotational speed.

7 Best budget

Garvee 2-Inch 1550W Magnetic Drill Press

Best for: Variable speed drilling with stable feed

Motor Power

1550W

Spindle Speed

10-speed, up to 820 RPM

Hole Capacity

1.57-2 in

Magnetic Force

13000 N (2922 lbf)

Configuration

Magnetic

Speed Settings

Variable Speed

View on Amazon: Garvee 2-Inch 1550W Magnetic Drill Press Affiliate link

This Garvee magnetic drill press features a 1550W motor and a 13000 N magnetic hold. It offers variable speed control with 10 settings up to 820 RPM. The unit handles holes up to 2 inches in diameter. Its double dovetail guide ensures stable vertical feed. You get a portable tool designed for drilling through thick steel and iron on construction sites or in fabrication shops.

Pros

• 1550W motor provides consistent power for heavy-duty tasks
• 13000 N (2922 lbf) magnetic hold secures the drill to steel
• 10 variable speed settings allow precise control up to 820 RPM
• Double dovetail guide minimizes wobble for accurate drilling

Cons

• Maximum speed of 820 RPM is lower than competitors reaching 3100 RPM
• 10-speed gear system offers less fine-tuning than continuous variable dials
• 2922 lbf magnetic force is weaker than models offering over 3100 lbf

Good fit if

• You need variable speed control for different materials
• You prioritize stable vertical feed with a dovetail guide
• You require a portable drill for overhead or vertical work

Skip if

• You need speeds above 820 RPM for high-speed drilling
• You require a magnetic hold stronger than 2922 lbf
• You prefer continuous variable speed adjustment over preset gears

Verdict: Garvee 1550W Mag Drill Press suits users who need variable speed precision and stable feed for moderate drilling tasks. It is less suitable if you require the highest speeds or strongest magnetic pull available.

Specifications side by side

Frequently asked questions

See also

• craftsman v20 1 2 inch drill driver alternatives
• milwaukee m18 1 2 inch drill driver alternatives