Hougen HMD900 Magnetic Drill or Hougen Magnetic Drill Coolant Bottle? Which Hougen Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the hougen hmd900 magnetic drill vs magnetic drill coolant bottle, you are looking at two distinct 115V tools from Hougen. Both share a magnetic configuration and operate on standard voltage. The primary difference lies in their design intent. The HMD900 is a compact unit focused on portability and quick accessory changes. The alternative model integrates a 16oz gravity-fed coolant bottle, making it better suited for vertical, repetitive drilling tasks. You need to weigh weight against built-in cooling.
Key differences
| Aspect | Hougen HMD900 Magnetic Drill | Hougen Magnetic Drill with Coolant Bottle |
|---|---|---|
| Model | HMD900 (0900101) | HMD904 (0904102) |
| Weight | 27 pounds | 42.9 pounds |
| Dimensions | 6.75 x 11 x 15 inches | 17 x 20 x 9 inches |
| Coolant System | Not listed | Integrated 16oz gravity-fed bottle |
| Chuck Type | Slot Drive arbor | Spring ejected arbor |
Which one should you choose?
Choose Hougen HMD900 Magnetic Drill if
- You need a lighter tool that is easier to carry to different job sites.
- You prioritize a smaller footprint for tight workspace constraints.
- You want quick accessory changes using a slot drive arbor.
Choose Hougen Magnetic Drill with Coolant Bottle if
- You perform vertical, repetitive holemaking that requires consistent lubrication.
- You want an integrated coolant system without adding external bottles.
- You do not mind the extra weight for the benefit of built-in cooling.
Verdict: Choose the HMD900 if portability and compact size are your top priorities. Select the model with the coolant bottle if you are doing repetitive vertical drilling and want integrated lubrication. Both tools offer 115V power, so your choice depends on weight and cooling needs.
HMD900 vs Coolant Bottle Comparison
Size and weight
The HMD900 Magnetic Drill is significantly more compact and lighter than the unit with the integrated coolant bottle. The HMD900 measures 11 inches in length, 6.75 inches in width, and 15 inches in height, weighing just 27 pounds. In contrast, the HMD904C with the coolant bottle is much larger, measuring 20 inches in length, 17 inches in width, and 9 inches in height. It also weighs 42.9 pounds. The extra size and weight come from the integrated 16oz gravity-fed coolant bottle. If you need a tool that is easier to carry and position in tight spaces, the smaller HMD900 is the clear choice. The larger unit requires more effort to move and store.
Coolant integration
The Hougen Magnetic Drill with Coolant Bottle includes a 16oz gravity-fed coolant bottle as part of its design. This feature is built directly into the unit, allowing for vertical repetitive holemaking with lubrication. The HMD900 Magnetic Drill does not list an integrated coolant bottle in its specifications. You would need to source a separate coolant solution if you choose the HMD900. For tasks requiring frequent drilling with lubrication to reduce heat and wear, the integrated system on the HMD904C offers convenience. The HMD900 remains a bare drill without this specific integrated feature.
Drilling capacity
The HMD900 Magnetic Drill lists a hole capacity of 1.5 inches. The data for the HMD904C with the Coolant Bottle does not explicitly state its hole capacity, though it notes it can use HMD904 accessories. Both tools share the same 115V voltage and magnetic configuration. The HMD900 features a slot drive arbor for accuracy and quicker accessory changes. Without specific capacity data for the coolant model, you cannot directly compare their maximum hole diameters from the provided specs. The HMD900 clearly supports 1.5-inch holes.
Configuration and voltage
Both tools share identical core electrical and mounting specifications. Each operates on 115V power and uses a magnetic configuration to attach to steel surfaces. The HMD900 and the HMD904C are both designed for benchtop or portable magnetic drilling applications. Since the voltage and mounting method are the same, your power source requirements will not differ between the two. The choice here depends on whether you prioritize the integrated coolant system or the compact form factor, as the fundamental operation and power needs are identical for both models.
Ergonomics and safety features
The HMD900 Magnetic Drill highlights specific ergonomic and safety features in its description. It includes an ergonomic housing and a spring slug ejection system to improve safety and reduce maintenance. The HMD904C also mentions a spring-ejected arbor, which aids in accessory changes. The HMD900 notes a hidden motor cord for increased safety. The larger coolant model does not list hidden cord features or specific ergonomic housing details in the provided data. The HMD900 offers more explicit information regarding user comfort and safety mechanisms in its design.
Choose the Right Hougen Drill for You
Users needing compact, lightweight equipment
The HMD900 Magnetic Drill weighs only 27 pounds and measures 11 inches long. Its compact size makes it easier to handle in tight spaces. You benefit from its hidden motor cord and ergonomic housing. This model prioritizes portability and reduced fatigue during extended use, making it ideal for jobs where moving the drill frequently is necessary.
Professionals doing repetitive vertical drilling
The HMD904C includes an integrated 16oz gravity-fed coolant bottle. This feature is designed specifically for vertical repetitive holemaking. You get consistent cooling without manual intervention. The larger frame supports this integrated system. If your work involves long durations of drilling in the same orientation, this integrated solution streamlines your workflow and maintains bit performance.
Operators requiring quick accessory changes
The HMD900 features a slot drive arbor for quicker change out of accessories. You can swap bits and adapters faster than with standard chucks. This design also offers increased accuracy. Combined with the spring slug ejection system, you reduce downtime between tasks. If fast setup and tool adjustment are critical to your daily operations, this mechanism provides a clear operational advantage.
The products compared
Hougen HMD900 Magnetic Drill
Best for: Users needing 1.5-inch capacity without integrated coolant
- Hole Capacity
- 1.5"
- Voltage
- 115V
- Configuration
- Magnetic
- Dimensions
- 11 × 6.75 × 15 inches
- Weight
- 27 pounds
View on Amazon: Hougen HMD900 Magnetic Drill Affiliate link
The Hougen HMD900 is a 115V magnetic drill designed for steel workpieces. It features a 1.5-inch hole capacity and a 2-inch diameter limit. The unit weighs 27 pounds and measures 11 by 6.75 by 15 inches. It includes a slot drive arbor for quick accessory changes. This model suits users needing a dedicated magnetic drilling solution without an integrated coolant system.
Pros
- 115V power supply
- 1.5-inch hole capacity
- Slot drive arbor for faster tool changes
- Hidden motor cord for reduced maintenance
Cons
- Does not include an integrated coolant bottle
- Heavier at 27 pounds compared to lighter alternatives
- Limited to 1.5-inch capacity for larger holes
Good fit if
- You need a 115V magnetic drill for standard steel thicknesses
- You prefer a slot drive arbor for quick accessory swaps
- You want to use a separate coolant bottle
Skip if
- You require an integrated coolant system for continuous operation
- You need to drill holes larger than 1.5 inches
- You are looking for a lighter unit under 20 pounds
Verdict: Hougen HMD900 115V Magnetic Drill offers solid 1.5-inch capacity and a slot drive arbor for users who prefer separate coolant management. It fits those prioritizing arbor speed and standard voltage over integrated fluid systems.
Hougen Magnetic Drill with Coolant Bottle
Best for: vertical repetitive holemaking with integrated coolant
- Voltage
- 115-Volt
- Configuration
- Magnetic
- Dimensions
- 20 × 17 × 9 inches
- Weight
- 42.9 pounds
View on Amazon: Hougen Magnetic Drill with Coolant Bottle Affiliate link
This Hougen HMD904 is a 115-volt magnetic drill designed for vertical, repetitive holemaking. It features an integrated 16oz gravity-fed coolant bottle and a spring-ejected arbor to keep your work clean and efficient. Weighing 42.9 pounds with dimensions of 17 by 9 by 20 inches, it offers a stable footprint. You should choose this model if you need built-in fluid management without adding external accessories.
Pros
- Integrated 16oz gravity-fed coolant bottle
- Spring-ejected arbor for easy bit changes
- 115-volt power configuration
- Compatible with standard HMD904 accessories
Cons
- Heavy at 42.9 pounds for portable use
- Large footprint with 20-inch length
- No variable speed control listed in specs
Good fit if
- You need built-in coolant for repetitive drilling
- You work on vertical surfaces requiring stability
- You want a complete unit without extra parts
Skip if
- You require a lightweight portable drill
- You need variable speed for delicate materials
- You have limited storage space for large tools
Verdict: Hougen HMD904 Magnetic Drill with Coolant suits users who prioritize integrated fluid delivery and stability for vertical, repetitive tasks. It is a solid choice for shop environments where the extra weight and size are manageable.
Specifications side by side
| Spec | Hougen HMD900 Magnetic Drill | Hougen Magnetic Drill with Coolant Bottle |
|---|---|---|
| Hole Capacity | 1.5" | not stated |
| Voltage | 115V | 115-Volt |
| Configuration | Magnetic | Magnetic |
| Dimensions | 11 × 6.75 × 15 inches | 20 × 17 × 9 inches |
| Weight | 27 pounds | 42.9 pounds |
| Color | Multicolor | Multicolor |
| Model | 0900101 | 0904102 |
Frequently asked questions
Does the Hougen HMD900 come with a built-in coolant system?
No, the HMD900 does not include an integrated coolant system. It is designed for users who prefer separate coolant management. You must use an external source or bottle. This model focuses on a 1.5-inch drilling capacity and a slot drive arbor. It suits those who prioritize standard voltage and arbor speed over fluid delivery.
Which Hougen drill is better for vertical repetitive holemaking?
The Hougen Magnetic Drill with Coolant Bottle is the better choice for vertical repetitive tasks. It features an integrated fluid delivery system that aids in stability. This unit weighs 42.9 pounds and measures 20 inches in length. The extra weight and size are manageable in shop environments where consistent cooling is essential for performance.
How much does the HMD900 weigh compared to the coolant model?
The HMD900 weighs 27 pounds, while the model with the coolant bottle weighs 42.9 pounds. This makes the HMD900 significantly lighter and easier to move. The lighter weight benefits users needing compact equipment. The coolant model is heavier due to its integrated fluid system and larger frame dimensions.
What is the drilling capacity of the Hougen HMD900?
The Hougen HMD900 offers a 1.5-inch drilling capacity. It features a slot drive arbor for tool attachment. This model operates on 115V power. It is ideal for users who need substantial capacity without the bulk of an integrated coolant system. The compact design supports focused drilling tasks.
Can I use the HMD900 for heavy-duty vertical drilling?
The HMD900 is less suited for heavy vertical drilling than the coolant model. It lacks integrated fluid delivery, which helps manage heat and stability in vertical tasks. The coolant bottle model is specifically designed for such environments. If you require integrated cooling for vertical work, the heavier unit is the appropriate selection.
What voltage do these Hougen magnetic drills use?
Both the HMD900 and the model with the coolant bottle use 115V power. They share the same magnetic configuration and standard voltage requirements. This consistency allows for flexibility in power source selection. You can operate either tool on standard shop circuits without needing specialized electrical setups.
Is the HMD900 suitable for tight spaces?
Yes, the HMD900 is suitable for tight spaces due to its compact size. It measures 11 inches in length and 6.75 inches in width. The hidden motor cord also aids in maneuverability. Its lightweight design at 27 pounds makes it easier to handle in confined areas compared to the larger coolant model.