GARVEETECH 13-Inch Floor Drill Press or GARVEETECH 1100W 1.6-Inch Magnetic Drill? Which GARVEETECH Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the garveetech 13 inch floor drill press vs 1100w 1 6 inch magnetic drill, you see two distinct tools from the same brand. Both are built for drilling metal and wood, but they serve different workflows. The floor model offers a large swing and variable speed for workshop precision. The magnetic unit provides high portability and a fixed speed for on-site work. You must choose based on whether you need stationary accuracy or mobile power.
Key differences
| Aspect | GarveeTech 13-Inch Floor Drill Press | GARVEETECH 1100W 1.6-Inch Magnetic Drill Press |
|---|---|---|
| Configuration | Floor | Magnetic |
| Swing | 13 in | not listed |
| Motor Power | 7.5 A | 1100 W |
| Spindle Speed | 288-3084 RPM | 550 RPM |
| Hole Capacity | 5/8 in | 1.6 in |
| Weight | 117 pounds | 27.7 pounds |
Which one should you choose?
Choose GarveeTech 13-Inch Floor Drill Press if
- You need a stationary tool with a 13-inch swing for large workpieces
- You require variable speeds from 288 to 3084 RPM for different materials
- You prefer a heavy, stable base for precise vertical drilling
Choose GARVEETECH 1100W 1.6-Inch Magnetic Drill Press if
- You need to drill holes up to 1.6 inches in diameter
- You require a lightweight unit under 28 pounds for job site transport
- You want to attach the drill directly to magnetic metal surfaces
Verdict: The floor drill press suits workshop users who need precision and variable speed control. The magnetic drill is better for field work where portability and larger hole capacity are key. Your choice depends on whether you drill in a shop or on-site.
Floor Press vs Magnetic Drill
Swing capacity
The GarveeTech 13-Inch Floor Drill Press offers a 13-inch swing, allowing you to drill holes further from the edge of your workpiece. This wide reach is essential for large metal plates or wide wooden boards. In contrast, the magnetic drill has no listed swing measurement. Its design relies on attaching directly to the workpiece, so the swing concept does not apply in the same way. If you need to drill centers in large panels, the floor press provides the necessary clearance. The magnetic unit is better for on-site work where portability matters more than lateral reach.
Motor power
You get different power metrics with these two tools. The floor drill press uses a 7.5-amp motor operating at 120 volts. This setup provides consistent torque for continuous benchtop operations. The magnetic drill specifies an 1100-watt motor running at 110 volts. While the wattage number is higher, the magnetic drill is designed for short, high-torque bursts on steel rather than long-duration drilling. The floor press motor is suited for varied materials like wood and metal over longer periods. Choose the floor press for general workshop use, or the magnetic drill for heavy-duty steel penetration.
Speed settings
Speed control varies significantly between the two models. The floor drill press features variable speed settings ranging from 288 to 3084 RPM. This wide range allows you to adjust for different materials, using lower speeds for metal and higher speeds for wood. The magnetic drill operates at a fixed 550 RPM. This single speed is optimized for drilling large holes in steel using annular cutters. You cannot adjust the speed on the magnetic unit. If you need versatility across wood, plastic, and metal, the floor press is the clear choice. The magnetic drill is specialized for one specific task.
Configuration
The configuration determines how you use each tool. The floor drill press is a stationary unit with a cast iron base, weighing 117 pounds. It requires a stable bench or floor stand for operation. The magnetic drill is a portable tool weighing only 27.7 pounds. It attaches directly to ferrous surfaces using a powerful magnet. This makes it ideal for job sites, construction zones, or working on large beams that cannot be moved. If you work in a fixed workshop, the floor press is better. If you move between locations, the magnetic drill offers superior mobility.
Hole capacity
Maximum hole size differs between the models. The floor drill press has a chuck capacity and hole capacity of 5/8 inch. This is suitable for standard drill bits and smaller hole saws. The magnetic drill boasts a 1.6-inch boring diameter. This allows it to cut large holes in steel plates using annular cutters, which is impossible with the floor press. If you need to create large openings for pipes or cables in structural steel, the magnetic drill is necessary. For general-purpose drilling under 5/8 inch, the floor press is sufficient and more versatile.
Choose the right Garveetech drill for you
Shop owners needing wide reach
You need to drill holes far from a workpiece edge. This model offers a 13-inch swing capacity. Its 288 to 3084 RPM variable speed lets you adjust for wood or metal. The 5/8-inch chuck handles common bits. The cast iron base provides stability for precise, offset-free drilling in a fixed workshop setting.
Job site workers needing portability
You work on large metal structures that cannot move. This magnetic drill weighs only 27.7 pounds and attaches directly to steel. It bores 1.6-inch holes at 550 RPM. The 11-piece bit set is included. Its compact size allows easy transport between sites, making it ideal for on-the-go industrial or construction tasks.
DIyers tackling varied materials
You switch between drilling wood and metal frequently. The floor press features a 7.5A pure copper motor and variable speed control. You can lower the speed for metal or raise it for wood. The tilting table adds versatility for angled holes. Its 12 speed settings ensure you have the right power for any home project.
The products compared
GarveeTech 13-Inch Floor Drill Press
Best for: stable metal and wood drilling
- Motor Power
- 7.5A
- Spindle Speed
- 288-3084 RPM (12 speed)
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
View on Amazon: GarveeTech 13-Inch Floor Drill Press Affiliate link
This 13-inch floor drill press features a 7.5A pure copper motor and variable speeds from 288 to 3084 RPM. It offers a 5/8-inch chuck capacity and a 3.2-inch spindle travel. The cast iron construction provides stability for drilling metal and wood. It suits users needing a dedicated floor-standing unit for precise, heavy-duty work.
Pros
- 13-inch swing provides ample workspace for larger materials
- Variable speed range of 288 to 3084 RPM handles various materials
- 7.5A pure copper motor delivers consistent power
- 3.2-inch spindle travel allows for deeper drilling operations
Cons
- Heavier build at 117 pounds reduces portability
- Limited to 5/8-inch chuck and hole capacity
- Floor-standing design requires dedicated space
Good fit if
- You need a stable base for drilling thick metal or wood
- You require variable speeds for different material types
- You have space for a floor-standing machine
Skip if
- You need to drill holes larger than 5/8 inches
- You require a compact, portable unit for job sites
- You only drill small holes in soft materials
Verdict: GarveeTech 13-Inch Floor Drill Press fits users who prioritize stability and variable speed control for metal and wood projects. It is a solid choice for workshops with space for a floor-standing unit.
GARVEETECH 1100W 1.6-Inch Magnetic Drill Press
Best for: on-site metal drilling tasks
- Motor Power
- 1100W
- Spindle Speed
- 550RPM
- Hole Capacity
- 1.6 in
- Voltage
- 110V
- Configuration
- Magnetic
- Target Material
- Metal
View on Amazon: GARVEETECH 1100W 1.6-Inch Magnetic Drill Press Affiliate link
This is a portable magnetic drill press designed for metalworking. It features a 1100W motor and a 1.6-inch boring diameter. The unit runs at 550 RPM and includes an 11-piece bit set. Weighing 27.7 pounds, it is built for job sites rather than stationary benchtop use. It suits professionals needing on-site drilling capabilities.
Pros
- 1100W motor provides strong drilling power
- 1.6-inch hole capacity handles thick metal
- Includes 11-piece magnetic drill bit set
- Portable design fits on job sites
Cons
- Low 550 RPM speed limits high-speed drilling
- 1.6-inch capacity is small for large holes
- Single track guide reduces stability slightly
Good fit if
- You need to drill steel on-site
- You require a portable magnetic solution
- You work with moderate hole sizes
Skip if
- You need high-speed drilling over 550 RPM
- You require holes larger than 1.6 inches
- You need a stationary benchtop press
Verdict: GarveeTech 1100W Magnetic Drill Press is a compact, on-site tool for drilling metal. It fits contractors who need portability and moderate capacity, but it does not replace a high-speed benchtop press.
Specifications side by side
| Spec | GarveeTech 13-Inch Floor Drill Press | GARVEETECH 1100W 1.6-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 7.5A | 1100W |
| Spindle Speed | 288-3084 RPM (12 speed) | 550RPM |
| Hole Capacity | 5/8" | 1.6 in |
| Swing | 13 in | not stated |
| Spindle Travel | 3.2" | not stated |
| Chuck Capacity | 5/8" | not stated |
| Voltage | 120V | 110V |
| Configuration | Benchtop | Magnetic |
| Speed Settings | Variable Speed | not stated |
| Amperage | 7.5 A | not stated |
| Features | Tilting Table | not stated |
| Motor Wattage | not stated | 1100W |
| Target Material | Metal, Wood | Metal |
| Cutting Width | not stated | 6-Inch |
| Dimensions | 24 × 12 × 62 inches | 13.4 × 6.1 × 16.3 inches |
| Weight | 117 pounds | 27.7 pounds |
| Model | RKLJO0kfauSc-EOxFePnaQSewNQ3A | _AXZjhVcG0smaDs4Lym47AI4m |
| Size | not stated | 1.1kw -550rpm -11pcs |
| Color | not stated | Red |
Frequently asked questions
Can the GarveeTech 13-Inch Floor Drill Press handle both metal and wood?
Yes, this model is designed for drilling both metal and wood. It features variable speed settings, allowing you to adjust the RPM for different materials. The 7.5-amp motor provides the power needed for stable drilling across various workshop projects.
Is the magnetic drill press portable for on-site work?
Yes, the magnetic drill press is highly portable. It weighs only 27.7 pounds and measures 16.3 inches in height. Its compact size and magnetic base make it ideal for contractors who need to drill metal at job sites rather than in a fixed workshop.
What is the maximum hole capacity of the magnetic drill?
The magnetic drill press has a cutting width of 6 inches. It is rated for a 1.6-inch drilling capacity. This makes it suitable for moderate metal drilling tasks, though it does not replace high-speed benchtop presses for heavy-duty work.
How much space does the floor drill press require?
The floor drill press is a large unit. It stands 62 inches tall, with a width of 12 inches and a length of 24 inches. Weighing 117 pounds, it requires a stable floor space and is best suited for workshops with ample room.
Does the floor drill press include a tilting table?
Yes, the GarveeTech 13-Inch Floor Drill Press includes a tilting table. This feature allows you to angle your workpiece for precise drilling. It is a useful attribute for projects that require non-perpendicular holes in metal or wood components.
What voltage do these tools require?
The floor drill press operates on 120V, while the magnetic drill press uses 110V. Both are standard household voltages, making them compatible with typical workshop power outlets. You do not need specialized industrial power sources for either machine.