GARVEETECH 13-Inch Floor Drill Press or GARVEETECH 1.57" 1450W Mag Drill? Which GARVEETECH Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing between the garveetech 13 inch floor drill press vs 1 57 1450w mag drill depends on your workspace and materials. Both tools handle metal and wood with precision. The key difference lies in their design and mobility. One is a heavy, stationary floor unit with variable speed. The other is a portable magnetic drill for vertical steel surfaces. Your choice hinges on whether you need fixed stability or on-site flexibility.
Key differences
| Aspect | GarveeTech 13-Inch Floor Drill Press | GarveeTech 1.57" 1450W Mag Drill Press |
|---|---|---|
| Configuration | Floor Drill Press | Magnetic Drill |
| Motor Power | 7.5 Amp | 1450W |
| Hole Capacity | 5/8 inch | 1.57 inch |
| Spindle Speed | 288-3084 RPM | Up to 820 RPM |
| Weight | 117 pounds | 28.7 pounds |
Which one should you choose?
Choose GarveeTech 13-Inch Floor Drill Press if
- You need a stationary setup for repeated wood or metal drilling in a workshop.
- You require variable speeds up to 3084 RPM for diverse materials.
- You prefer a cast iron base for maximum stability during heavy use.
Choose GarveeTech 1.57" 1450W Mag Drill Press if
- You need to drill large holes up to 1.57 inches in steel plates.
- You require a portable tool for on-site construction or fabrication work.
- You need high magnetic force (2922 lbf) for vertical or overhead drilling.
Verdict: The floor drill press suits workshop users needing versatility and high-speed control. The magnetic drill is better for field work requiring large-diameter holes in steel. Select based on whether your priority is stationary precision or portable power.
Comparing Two Garveetech Drill Presses
Swing and Capacity
The GarveeTech 13-Inch Floor Drill Press offers a 13-inch swing, allowing you to drill holes closer to the edge of large workpieces. It handles a 5/8-inch hole capacity. In contrast, the GarveeTech 1.57" 1450W Mag Drill Press focuses on precision for steel structures. It drills up to 1.57-inch diameter holes. This model is designed for magnetic attachment to metal surfaces. It does not have a traditional swing measurement because it clamps directly to the work. You need to choose based on whether you need wide clearance or large-diameter core holes.
Configuration and Portability
Configuration defines how you use these tools. The 13-Inch Floor Drill Press is a heavy, stationary unit weighing 117 pounds. Its dimensions are 12 inches wide by 62 inches tall. It stays fixed in your workshop. The 1.57" 1450W Mag Drill Press is a magnetic tool weighing only 28.7 pounds. It measures 6 inches wide by 16 inches tall. You can carry it to different job sites. It attaches to vertical or horizontal metal beams. If you work in construction or fabrication, the magnetic unit moves with you. The floor model requires a dedicated space.
Speed Settings
Speed control affects the quality of your holes in different materials. The 13-Inch Floor Drill Press provides a variable speed range from 288 to 3084 RPM. It offers 12 distinct speed settings, letting you adjust for wood, metal, or plastic. The 1.57" 1450W Mag Drill Press operates at up to 820 RPM. This lower speed is optimized for heavy-duty metal coring and tapping. It includes speed control for precision. You get higher maximum speeds with the floor press for general drilling. You get specialized low-speed torque with the mag drill for steel.
Motor Power
Motor power determines how much resistance each tool can handle. The 13-Inch Floor Drill Press uses a 7.5-amp pure copper motor. It runs on 120V power. This setup provides consistent torque for continuous shop use. The 1.57" 1450W Mag Drill Press features a 1450-watt motor. This is a high-power input for a portable tool. It generates 2922 lbf of magnetic force to stay stable while drilling. The mag drill has more raw power for dense metal. The floor press has sufficient power for general woodworking and light metalwork.
Features and Accessories
Features add versatility to your workflow. The 13-Inch Floor Drill Press includes a tilting table and a 3.2-inch spindle travel. It comes with hex wrenches and a key drift. The table size is 10 inches by 10 inches. The 1.57" 1450W Mag Drill Press includes an air-water hybrid cooling system and an external coolant tank. It comes with 11 core drill bits. It also features a double dovetail rail for stability. The mag drill is ready for immediate metal coring. The floor press is ready for general benchtop drilling.
Which Garveetech Drill Press Suits You
Shop owners needing heavy stationary drilling
This 117-pound floor model provides a stable base for precision work. Its 13-inch swing and 12-inch width allow you to drill near the edges of large wood or metal pieces. The variable speed from 288 to 3084 RPM lets you adjust for different materials. The cast iron construction ensures durability during long, continuous sessions in a fixed workshop.
Contractors drilling thick steel on site
Weighing only 28.7 pounds, this magnetic unit is highly portable. It generates 2922 lbf of magnetic force, securing it firmly to dense metal surfaces. The 1.57-inch hole capacity handles large core drilling tasks. The air-water hybrid cooling system prevents overheating during tough jobs. You can attach it to structural steel for precise tapping or coring anywhere.
Users needing versatile multi-material capability
The 7.5A pure copper motor delivers ample power for both wood and metal. You get 12 speed settings to optimize performance for various materials. The 3.2-inch spindle travel allows for deeper holes in thicker stock. The tilting table adds flexibility for angled drilling. This stationary press is ideal if you switch between woodworking projects and light metal fabrication regularly.
The products compared
GarveeTech 13-Inch Floor Drill Press
Best for: Versatile drilling in wood and metal
- Motor Power
- 7.5A
- Spindle Speed
- 288-3084 RPM (12 speed)
- Hole Capacity
- 5/8"
- Swing
- 13 in
- Spindle Travel
- 3.2"
- Chuck Capacity
- 5/8"
View on Amazon: GarveeTech 13-Inch Floor Drill Press Affiliate link
This GarveeTech floor drill press features a 7.5A pure copper motor and a 13-inch swing. It offers variable speeds from 288 to 3084 RPM across 12 settings. The unit includes a tilting table and a 3.2-inch spindle travel. It suits users needing precise drilling in metal and wood. The 117-pound cast iron base provides stability for benchtop or floor use.
Pros
- 7.5A pure copper motor for high torque
- Variable speed range of 288 to 3084 RPM
- 13-inch swing capacity for larger workpieces
- Tilting table for angled drilling operations
- 3.2-inch spindle travel reduces frequent bit changes
Cons
- Heavier 117-pound build requires solid support
- Limited to 5/8-inch chuck and hole capacity
- No digital speed display for precise RPM setting
Good fit if
- You need a versatile machine for wood and metal
- You require a 13-inch swing for larger projects
- You want variable speed control for different materials
Skip if
- You need to drill holes larger than 5/8 inch
- You prefer a lighter machine for easy relocation
- You require digital speed readouts for precision
Verdict: GarveeTech 13-Inch Floor Drill Press is a sturdy option for DIYers who need variable speeds and a wide swing. It fits users who prioritize motor power and table adjustability over digital controls.
GarveeTech 1.57" 1450W Mag Drill Press
Best for: drilling thick steel plates on site
- Motor Power
- 1450W
- Spindle Speed
- 10-speed, 820 RPM
- Hole Capacity
- 1.57"
- Magnetic Force
- 2922 Lbf/13000N
- Configuration
- Magnetic
- Design
- Portable
View on Amazon: GarveeTech 1.57" 1450W Mag Drill Press Affiliate link
This GarveeTech magnetic drill press mounts to steel surfaces for stable drilling. It features a 1450W motor and generates 2922 lbf of holding force. The unit drills holes up to 1.57 inches in diameter at speeds up to 820 RPM. It includes an external coolant tank and 11 core bits. This tool suits metalworkers needing portable, high-torque capacity for thick materials.
Pros
- 1450W motor provides 2922 lbf magnetic force
- Drills up to 1.57" diameter holes
- Includes external coolant tank for heat dissipation
- Comes with 11 core drill bits
- Double dovetail rail ensures smooth travel
Cons
- Lower spindle speed of 820 RPM compared to floor models
- Heavier at 28.7 pounds, reducing portability
- Requires flat steel surfaces for magnetic mounting
Good fit if
- You need to drill thick steel plates
- You require high magnetic holding force
- You work on vertical or overhead surfaces
Skip if
- You drill primarily wood or non-magnetic metals
- You need high-speed drilling above 820 RPM
- You require a stationary benchtop unit
Verdict: GarveeTech 1.57" Magnetic Mag Drill delivers high holding force for heavy metal fabrication. It fits contractors drilling thick steel where stability matters more than high speed.
Specifications side by side
| Spec | GarveeTech 13-Inch Floor Drill Press | GarveeTech 1.57" 1450W Mag Drill Press |
|---|---|---|
| Motor Power | 7.5A | 1450W |
| Spindle Speed | 288-3084 RPM (12 speed) | 10-speed, 820 RPM |
| Hole Capacity | 5/8" | 1.57" |
| Swing | 13 in | not stated |
| Spindle Travel | 3.2" | not stated |
| Magnetic Force | not stated | 2922 Lbf/13000N |
| Chuck Capacity | 5/8" | not stated |
| Voltage | 120V | not stated |
| Configuration | Benchtop | Magnetic |
| Speed Settings | Variable Speed | not stated |
| Amperage | 7.5 A | not stated |
| Features | Tilting Table | not stated |
| Target Material | Metal, Wood | not stated |
| Design | not stated | Portable |
| Dimensions | 24 × 12 × 62 inches | 13 × 6 × 16 inches |
| Weight | 117 pounds | 28.7 pounds |
| Model | RKLJO0kfauSc-EOxFePnaQSewNQ3A | 1.57" w/ Speed Control |
| Size | not stated | 1.57" w/ Speed Control |
Frequently asked questions
Can the GarveeTech 13-Inch Floor Drill Press drill into metal?
Yes, this model is designed for both metal and wood. It features a variable speed setting and a 7.5 A motor, allowing you to adjust the rotation rate for different materials. The 13-inch swing and tilting table provide flexibility for various drilling angles and workpiece sizes.
Is the magnetic drill press portable for job sites?
Yes, the GarveeTech 1.57" Mag Drill is highly portable. Weighing only 28.7 pounds, it is much lighter than the stationary floor model. Its magnetic configuration allows you to attach it directly to steel surfaces, making it ideal for on-site fabrication tasks where mobility is essential.
Which drill press has a larger swing capacity?
The GarveeTech 13-Inch Floor Drill Press has the larger swing. Its 13-inch swing allows you to drill holes closer to the edge of wide workpieces. The magnetic drill focuses on diameter capacity rather than swing, making it better for attaching to vertical steel plates than for wide wood projects.
Does the floor model include a tilting table?
Yes, the GarveeTech 13-Inch Floor Drill Press includes a tilting table. This feature allows you to adjust the angle of the workpiece for precise angled drilling. The magnetic drill does not list a tilting table, as it is designed to attach flat against vertical or horizontal steel surfaces.
How heavy is the stationary drill press compared to the magnetic one?
The floor drill press weighs 117 pounds, providing a stable base for precision work. In contrast, the magnetic drill press weighs just 28.7 pounds. This significant weight difference highlights the floor model's stationary nature versus the magnetic model's portability for field use.
What is the voltage requirement for both GarveeTech models?
The GarveeTech 13-Inch Floor Drill Press operates on 120V power. While the magnetic drill's voltage is not explicitly listed, it shares the same brand ecosystem. You should verify your workshop outlet compatibility, as the floor model requires a standard 120V circuit for its 7.5 A motor.
Can I use the magnetic drill for woodworking projects?
No, the magnetic drill is intended for steel fabrication. It attaches to magnetic surfaces, which wood cannot support. For wood projects, the GarveeTech 13-Inch Floor Drill Press is the correct choice, as it handles both metal and wood with its variable speed and adjustable table.