ExploreHorizon 13 in Floor Drill vs ExploreHorizon High-Power Magnetic Drill Press (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The explorehorizon 13 in floor drill vs high power magnetic drill press comparison highlights two distinct tools from the same brand. Both machines deliver substantial power for drilling tasks. The floor drill offers versatile speed settings and a tilting table for general workshop use. The magnetic drill provides extreme holding force for structural steel work. You need to choose based on your workspace and material types.
Key differences
| Aspect | ExploreHorizon 13-Inch 7.5A Drill Press | ExploreHorizon 1550W 2-Inch Magnetic Drill Press |
|---|---|---|
| Configuration | Benchtop/Floor | Magnetic |
| Motor Power | 7.5A | 1550W |
| Swing | 13 in | not listed |
| Speed Settings | Variable (288-3084 RPM) | 10-speed (up to 820 RPM) |
| Magnetic Force | not listed | 13,000N |
| Target Material | Metal, Wood | Metal |
Which one should you choose?
Choose ExploreHorizon 13-Inch 7.5A Drill Press if
- You need to drill into wood and metal with high-speed versatility.
- You require a stable base with a tilting table for angled holes.
- You want a larger swing capacity for wider workpieces.
Choose ExploreHorizon 1550W 2-Inch Magnetic Drill Press if
- You are drilling thick structural steel or iron plates.
- You need to secure the drill to vertical or overhead surfaces.
- You prioritize deep hole capacity up to 2 inches in diameter.
Verdict: Choose the floor drill if you need a versatile machine for mixed materials and variable speeds. Pick the magnetic drill for heavy-duty steel fabrication where secure mounting and large hole capacity are critical. Neither tool replaces the other for different job sites.
Compare Drill Press Specs
Motor Power
The ExploreHorizon 13-Inch Drill Press uses a 7.5A induction motor. This provides strong torque for general workshop tasks. The ExploreHorizon 1550W Magnetic Drill Press lists 1550W of power. Wattage and amperage measure power differently. You need to convert units to compare them directly. The magnetic drill targets heavy steel fabrication. The floor drill handles wood and metal. Both machines offer substantial power for their intended uses. The magnetic drill’s wattage suggests high output for thick steel.
Drilling Capacity
Hole capacity defines the largest bit each tool accepts. The floor drill has a 5/8 inch chuck and hole capacity. It is suitable for smaller diameter holes in wood or light metal. The magnetic drill bores holes from 1.57 to 2 inches. This massive difference makes the magnetic drill ideal for structural steel. You cannot use the floor drill for large conduit holes. The magnetic drill handles thick pipes and beams with ease.
Speed Settings
Speed range affects how well you match the bit to the material. The floor drill offers 12 speeds from 288 to 3084 RPM. This wide range allows fast drilling in wood and slower speeds for metal. The magnetic drill has 10 speeds up to 820 RPM. Magnetic drills typically run slower to handle large hole saws in steel. The floor drill provides higher maximum RPM for versatility. The magnetic drill focuses on lower, controlled speeds for heavy cutting.
Configuration
Configuration determines how you mount and use the machine. The floor drill is a benchtop unit with a 13-inch swing. It sits on a workbench or floor stand. It has a tilting table for angled holes. The magnetic drill uses a 13,000N magnetic base. It sticks to flat, vertical, or overhead surfaces. You do not need a bench. The magnetic base allows drilling in place on large structures. This makes the magnetic drill unique for field work.
Target Material
Each tool is designed for specific materials. The floor drill targets both metal and wood. It is a versatile workshop tool for general DIY and fabrication. The magnetic drill targets only metal, specifically steel, iron, and construction materials. It is not designed for wood. If you need to drill wood, the floor drill is the correct choice. The magnetic drill is strictly for industrial metalworking. Choose based on whether you work with wood or steel.
Choose the Right Drill for Your Needs
Woodworkers needing variable speed and tilt
You should choose the 13-Inch Drill Press if you work with wood or general metals. Its 288 to 3084 RPM variable speed lets you adjust for different materials. The tilting table allows for angled drilling up to 45 degrees. This flexibility makes it ideal for detailed benchtop projects and DIY tasks.
Steel fabricators drilling large structural holes
Select the Magnetic Drill Press for heavy-duty steel and iron work. It bores holes up to 2 inches deep with a 1550W motor. The 13,000N magnetic base secures the tool to vertical or overhead surfaces. This stability ensures precise, vibration-free drilling for conduit and structural steel applications.
Users requiring portability and compact design
The Magnetic Drill Press weighs only 28.7 pounds, making it much lighter than the floor model. Its compact dimensions allow for easy transport to job sites. You can mount it directly onto metal surfaces, eliminating the need for a heavy stand. This portability is essential for on-site construction and fabrication work.
The products compared
ExploreHorizon 13-Inch 7.5A Drill Press
Best for: Angled drilling and variable speed woodwork
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed (288-3084 RPM)
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
- Chuck Capacity
- 5/8 in
View on Amazon: ExploreHorizon 13-Inch 7.5A Drill Press Affiliate link
This ExploreHorizon 13 in floor drill press features a 7.5A motor and variable speed control from 288 to 3084 RPM. It offers a 13-inch swing and a 5/8-inch chuck capacity for drilling wood and metal. The tilting table allows for 0-45 degree adjustments. It suits users needing a sturdy benchtop or floor unit for general DIY and workshop tasks.
Pros
- Variable speed range of 288 to 3084 RPM
- 13-inch swing for larger workpieces
- Tilting table with 0-45 degree adjustment
- Cast iron construction for durability
Cons
- Smaller 5/8-inch hole capacity compared to magnetic drills
- Lower speed range limits high-RPM metal work
- Heavier 45.9-pound build requires stable support
Good fit if
- You need to drill angled holes in wood or metal
- You prefer a variable speed floor model
- You work with materials up to 5/8-inch thick
Skip if
- You require drilling larger than 5/8-inch holes
- You need high-speed magnetic drilling for steel
- You want a lightweight portable unit
Verdict: ExploreHorizon 13 in Floor Drill Press offers a versatile speed range and tilting table for angled drilling tasks. It fits users who need a sturdy, variable-speed floor model for wood and metal projects.
ExploreHorizon 1550W 2-Inch Magnetic Drill Press
Best for: on-site structural steel drilling
- Motor Power
- 1550W
- Spindle Speed
- 10-speed, up to 820 RPM
- Hole Capacity
- 1.57"–2"
- Spindle Travel
- 2"
- Magnetic Force
- 13,000N
- Configuration
- Magnetic
View on Amazon: ExploreHorizon 1550W 2-Inch Magnetic Drill Press Affiliate link
This ExploreHorizon magnetic drill press uses a 1550W motor to bore holes up to 2 inches deep in steel. Its 13,000N base adheres firmly to vertical or overhead surfaces. You get 10 speeds up to 820 RPM and a double dovetail guide for steady feeds. It suits fabrication and construction work where portability and power matter.
Pros
- 1550W motor handles heavy-duty steel and iron
- 13,000N magnetic force secures to vertical surfaces
- Double dovetail guide minimizes wobble during drilling
- 10-speed control optimizes bit life
Cons
- Lower max speed of 820 RPM compared to floor models
- Heavier at 28.7 pounds for portability
- Limited to flat, vertical, or overhead surfaces
Good fit if
- You need to drill structural steel on site
- You work on vertical or overhead surfaces
- You require high holding force for large bits
Skip if
- You need high-speed drilling for small bits
- You prefer a stationary benchtop setup
- You work on non-magnetic materials like wood
Verdict: ExploreHorizon Magnetic Drill 1550W delivers strong holding power for on-site steelwork. It fits professionals who need to drill large holes in vertical or overhead positions.
Specifications side by side
| Spec | ExploreHorizon 13-Inch 7.5A Drill Press | ExploreHorizon 1550W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 7.5A | 1550W |
| Spindle Speed | 12-speed (288-3084 RPM) | 10-speed, up to 820 RPM |
| Hole Capacity | 5/8 in | 1.57"–2" |
| Swing | 13 in | not stated |
| Spindle Travel | 3.2 in | 2" |
| Magnetic Force | not stated | 13,000N |
| Chuck Capacity | 5/8 in | not stated |
| Voltage | 120V | not stated |
| Configuration | Benchtop | Magnetic |
| Speed Settings | Variable Speed | not stated |
| Amperage | 7.5 A | not stated |
| Features | Tilting Table | not stated |
| Motor Wattage | not stated | 1550W |
| Target Material | Metal, Wood | Metal |
| Dimensions | 55 × 20 × 10 inches | 13.2 × 6.3 × 16.1 inches |
| Weight | 45.9 pounds | 28.7 pounds |
| Model | 1c1Q7_2FN2AxrMxs1W8boQuQ17 | 38152FETkJeSEjWAxopXggI1I |
| Color | not stated | Red |
Frequently asked questions
Can the ExploreHorizon 13-Inch Drill Press tilt for angled holes?
Yes, it features a tilting table. This allows you to drill precise angled holes without repositioning the workpiece. It is ideal for woodworking or metal projects requiring specific joint angles. The table adjusts to accommodate various tilt requirements for your specific task.
Is the magnetic drill press suitable for vertical or overhead drilling?
Yes, it is designed for on-site structural steel work. The magnetic base allows secure attachment to vertical or overhead surfaces. This makes it ideal for professionals who need to drill large holes in steel structures where traditional drill presses cannot reach or stabilize.
Which drill press is better for woodworking tasks?
The 13-Inch Drill Press is better for woodworking. It offers variable speed settings and a tilting table, which are essential for wood projects. It targets both wood and metal, providing versatility for general workshop use. The magnetic drill is strictly for metal applications.
How heavy is the ExploreHorizon magnetic drill press?
It weighs 28.7 pounds. This weight makes it portable for on-site structural steel drilling. You can easily transport it to different job sites. The lighter weight compared to the floor model aids in maneuverability when setting up in various locations.
What is the swing capacity of the 13-inch floor drill?
The swing capacity is 13 inches. This determines the maximum distance from the center of the spindle to the column. It allows you to drill holes in larger workpieces up to this diameter. This capacity is standard for general workshop drilling tasks.
Does the magnetic drill press work on wood?
No, it targets metal only. The magnetic base requires a ferrous surface to attach securely. Wood is non-magnetic, so the drill cannot adhere to it. Use the 13-Inch Drill Press for wood projects, as it is designed for versatile material handling.
What voltage do these machines require?
The 13-Inch Drill Press requires 120V. This is standard for most workshop outlets. The magnetic drill lists its power in watts rather than voltage in the provided data. Ensure your workspace has the correct power supply for the floor drill model.
Which machine is more compact for storage?
The magnetic drill press is more compact. It measures 6.3 inches in width and 13.2 inches in length. The floor drill is significantly larger, measuring 20 inches wide and 55 inches long. The magnetic unit is easier to store or transport.