ExploreHorizon 13 in Floor Drill vs ExploreHorizon 1550W Magnetic Drill Press: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the explorehorizon 13 in floor drill vs 1550w magnetic drill press, you face two distinct tools. Both units are built by ExploreHorizon and designed for drilling tasks. The primary difference lies in their operation and mounting. One is a stationary benchtop unit with a tilting table for wood and metal. The other is a portable magnetic drill that attaches directly to steel surfaces. You must choose based on your workspace and material type.
Key differences
| Aspect | ExploreHorizon 13-Inch 7.5A Drill Press | ExploreHorizon 1550W 2-Inch Magnetic Drill Press |
|---|---|---|
| Configuration | Benchtop | Magnetic |
| Motor Power | 7.5 A | 1550 W |
| Swing / Hole Capacity | 13 in swing | 2 in hole capacity |
| Spindle Speed | 288-3084 RPM | Up to 750 RPM |
| Target Material | Metal, Wood | Metal |
| Weight | 45.9 pounds | 28.8 pounds |
Which one should you choose?
Choose ExploreHorizon 13-Inch 7.5A Drill Press if
- You need a stationary machine for drilling wood and metal in a workshop.
- You require variable speeds up to 3084 RPM for smaller bits.
- You want a tilting table for angled holes.
Choose ExploreHorizon 1550W 2-Inch Magnetic Drill Press if
- You primarily drill thick steel plates or structural metal.
- You need to move the tool to different job sites.
- You require strong magnetic holding force for vertical or overhead work.
Verdict: The 13-inch floor drill press suits workshop users who drill various materials like wood and metal at high speeds. The 1550W magnetic drill is better for professionals who need to drill large holes in thick steel on-site. Choose based on whether you need portability or versatile benchtop performance.
ExploreHorizon Drill Press Specs
swing capacity
The ExploreHorizon 13-Inch 7.5A Drill Press offers a 13-inch swing. This measurement determines the maximum distance from the spindle center to the column. You can drill larger diameters or position workpieces further from the edge. The ExploreHorizon 1550W 2-Inch Magnetic Drill Press does not list a swing capacity. Magnetic drills attach directly to the workpiece, so the swing concept does not apply. For stationary work on large sheets, the 13-inch floor drill provides a clear structural limit that defines its workspace. The magnetic drill has no such fixed limit, but the floor drill wins for defined benchtop reach.
configuration type
Configuration defines how the machine operates and mounts. The ExploreHorizon 13-Inch 7.5A Drill Press is a benchtop floor drill press. It sits on a stable base with a fixed column. This setup requires dedicated floor or bench space. The ExploreHorizon 1550W 2-Inch Magnetic Drill Press is a portable magnetic unit. It clamps directly to ferrous metal surfaces. This design allows you to take the tool to the work, such as beams or pipes. The magnetic drill wins for versatility in field work and limited spaces. The floor drill wins for stationary precision and stability in a workshop.
speed settings
Speed control affects hole quality in different materials. The ExploreHorizon 13-Inch 7.5A Drill Press features variable speed control ranging from 288 to 3084 RPM. This wide range allows you to adjust for wood, plastic, or light metal drilling. The ExploreHorizon 1550W 2-Inch Magnetic Drill Press offers adjustable speeds up to 750 RPM. This lower maximum speed is optimized for high-torque coring and drilling in tough metals. The floor drill offers higher top speeds for general purpose tasks. The magnetic drill offers lower, controlled speeds for heavy metal work. Both serve their specific niches well.
motor power
Motor power dictates the machine's ability to handle resistance. The ExploreHorizon 13-Inch 7.5A Drill Press uses a 7.5 Amp motor. This amperage rating indicates substantial power for continuous drilling in wood and metal. The ExploreHorizon 1550W 2-Inch Magnetic Drill Press uses a 1550W motor. Wattage provides a direct measure of electrical power consumption and output. 1550W is roughly equivalent to 2.1 horsepower, indicating high torque for demanding metal applications. The magnetic drill has higher raw power output for tough jobs. The floor drill has sufficient power for general workshop tasks.
target material
Each tool is designed for specific material types. The ExploreHorizon 13-Inch 7.5A Drill Press targets both metal and wood. Its variable speed and chuck capacity make it versatile for DIY projects involving multiple materials. The ExploreHorizon 1550W 2-Inch Magnetic Drill Press targets metal exclusively. It is designed for ferrous surfaces like steel beams and plates. The magnetic base requires a conductive material to attach. The floor drill wins for versatility if you work with wood. The magnetic drill wins for specialized, heavy-duty metal fabrication.
Which Drill Press Suits Your Needs
Home woodworkers needing versatile speed
You need adjustable speeds for different materials. This benchtop unit offers 288 to 3084 RPM. The variable speed control lets you switch easily between wood and metal. The 13-inch swing allows you to drill larger diameters. The tilting table adds flexibility for angled holes. This stationary tool fits well in a fixed workshop space.
Metalworkers drilling thick steel plates
You require high holding force for vertical or overhead work. This magnetic drill provides 3,147 lbf of magnetic force. It stays firmly in place for vibration-free drilling. The 2-inch coring capacity handles large holes in steel. The portable design allows you to take it to the job site. It is built for tough metalworking environments.
DIyers with limited floor space
You want a tool that does not take up permanent floor space. This magnetic drill weighs only 28.8 pounds. You can carry it to where you need it. The compact size makes storage easy. It attaches directly to metal surfaces. This portability is ideal for small workshops or on-site repairs.
The products compared
ExploreHorizon 13-Inch 7.5A Drill Press
Best for: Versatile drilling with variable speeds
- Motor Power
- 7.5A
- Spindle Speed
- 12-speed (288-3084 RPM)
- Hole Capacity
- 5/8 in
- Swing
- 13 in
- Spindle Travel
- 3.2 in
- Chuck Capacity
- 5/8 in
View on Amazon: ExploreHorizon 13-Inch 7.5A Drill Press Affiliate link
This ExploreHorizon floor drill press features a 7.5A motor and variable speed settings ranging from 288 to 3084 RPM. It offers a 13-inch swing and a 5/8-inch chuck capacity for drilling wood and metal. The tilting table allows for angled work. You get a 3.2-inch spindle travel and a sturdy cast iron base. It suits DIYers needing adjustable speeds for various materials.
Pros
- Variable speed from 288 to 3084 RPM
- 13-inch swing capacity
- Tilting table for angled drilling
- 7.5A motor for wood and metal
Cons
- Smaller 5/8-inch hole capacity
- No magnetic base for stability
- Larger footprint than benchtop models
Good fit if
- You need variable speeds for different materials
- You require a 13-inch swing capacity
- You want to drill at angles
Skip if
- You need to drill large diameter holes
- You require magnetic base stability
- You need high-speed precision for metal
Verdict: ExploreHorizon 13 in Floor Drill Press offers variable speeds and a tilting table for versatile woodworking and light metalwork. It fits users needing a 13-inch swing and angled drilling capabilities.
ExploreHorizon 1550W 2-Inch Magnetic Drill Press
Best for: portable metal coring on construction sites
- Motor Power
- 1550W
- Spindle Speed
- up to 750 RPM
- Hole Capacity
- 2 in
- Spindle Travel
- 2 in
- Magnetic Force
- up to 14,000N (3,147 lbf)
- Configuration
- Magnetic
View on Amazon: ExploreHorizon 1550W 2-Inch Magnetic Drill Press Affiliate link
This ExploreHorizon magnetic drill press is designed for portable metalworking. It features a 1550W motor and a strong 3,147 lbf magnetic base for stability. The adjustable speed reaches 750 RPM, and it handles 2-inch coring diameter and depth. Its compact, portable design suits construction and installation tasks where a stationary benchtop unit is impractical.
Pros
- 1550W motor delivers high torque for tough metal
- 3,147 lbf magnetic force ensures vibration-free holding
- Adjustable speed up to 750 RPM
- Supports 2-inch coring diameter and depth
- Built-in overload protection and cooling system
Cons
- Lower max speed of 750 RPM compared to 3,000+ RPM floor drills
- Smaller 2-inch hole capacity versus 13-inch floor drill range
- No variable speed control beyond the fixed adjustable range
Good fit if
- You need to drill large holes in thick metal plates
- You require a portable tool for on-site construction work
- You are installing equipment where a bench drill cannot reach
Skip if
- You need high-speed drilling for small diameter holes
- You primarily drill wood or plastic materials
- You require a stationary benchtop unit with a table
Verdict: ExploreHorizon 1550W Magnetic Drill is a specialized tool for heavy-duty metal coring on-site. It fits contractors who need portable power and stability for large holes in steel.
Specifications side by side
| Spec | ExploreHorizon 13-Inch 7.5A Drill Press | ExploreHorizon 1550W 2-Inch Magnetic Drill Press |
|---|---|---|
| Motor Power | 7.5A | 1550W |
| Spindle Speed | 12-speed (288-3084 RPM) | up to 750 RPM |
| Hole Capacity | 5/8 in | 2 in |
| Swing | 13 in | not stated |
| Spindle Travel | 3.2 in | 2 in |
| Magnetic Force | not stated | up to 14,000N (3,147 lbf) |
| Chuck Capacity | 5/8 in | not stated |
| Voltage | 120V | not stated |
| Configuration | Benchtop | Magnetic |
| Speed Settings | Variable Speed | not stated |
| Amperage | 7.5 A | not stated |
| Features | Tilting Table | not stated |
| Motor Wattage | not stated | 1550W |
| Target Material | Metal, Wood | Metal |
| Design | not stated | Portable |
| Dimensions | 55 × 20 × 10 inches | 13.2 × 6.3 × 16.1 inches |
| Weight | 45.9 pounds | 28.8 pounds |
| Model | 1c1Q7_2FN2AxrMxs1W8boQuQ17 | nhNE3JEx6HooBXTc5xrrlw9IM43 |
| Size | not stated | 13.19 W × 6.30 D × 16.14 H inch |
Frequently asked questions
Can the ExploreHorizon 13-Inch Drill Press tilt for angled cuts?
Yes, this benchtop model includes a tilting table feature. This allows you to drill at various angles without repositioning the entire machine. It is useful for woodworking projects or light metalwork where angled holes are required. The magnetic press does not list this capability, making the benchtop unit more versatile for non-perpendicular drilling tasks.
Which drill press is lighter and easier to move?
The ExploreHorizon 1550W Magnetic Drill Press is significantly lighter at 28.8 pounds. The 13-Inch Benchtop Drill Press weighs 45.9 pounds. The magnetic unit is designed for portability on construction sites. Its compact dimensions also make it easier to transport. The benchtop model is heavier and intended for stationary use in a workshop.
What is the maximum swing capacity of the benchtop model?
The ExploreHorizon 13-Inch Drill Press offers a 13-inch swing. This measurement indicates the distance from the spindle center to the column. It determines the largest diameter hole you can drill or the width of material you can position next to the column. The magnetic press does not list a swing capacity, as it cores rather than drills standard holes.
Is the magnetic drill press suitable for wood drilling?
No, the ExploreHorizon 1550W Magnetic Drill Press is designed specifically for metal. Its target material is listed as metal only. It uses magnetic force to attach to steel surfaces for coring. The 13-Inch Benchtop Drill Press handles both wood and metal. You should choose the benchtop unit if you need to drill into wooden workpieces.
How much power does the magnetic drill press draw?
The ExploreHorizon 1550W Magnetic Drill Press features a 1550-watt motor. This high wattage supports heavy-duty metal coring on site. The benchtop model uses a 7.5-amp motor at 120V. While the benchtop unit offers variable speeds, the magnetic press relies on its high wattage for torque in thick steel. Check your site power supply for the magnetic unit.
Does the benchtop drill press have variable speed control?
Yes, the ExploreHorizon 13-Inch Drill Press provides variable speed settings. This allows you to adjust RPMs for different materials like wood or metal. The magnetic drill press does not list variable speed controls in its specifications. It is optimized for constant high-speed coring in metal. If you need speed flexibility, the benchtop model is the better choice.
What are the physical dimensions of the magnetic drill press?
The ExploreHorizon 1550W Magnetic Drill Press measures 6.3 inches in width, 13.2 inches in length, and 16.1 inches in height. These compact dimensions support its portable design for field use. The benchtop model is larger, measuring 20 inches wide and 55 inches long. The magnetic unit fits easily in a transport case, while the benchtop unit requires a dedicated workbench space.