6 Best Alternatives to the DEXSO 1650W Magnetic Drill Press (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are searching for dexso 1650w magnetic drill press alternatives, you likely need a tool that matches its 1650W motor strength and 1.57-inch boring diameter. The DEXSO model offers strong 2922 lbf holding force and variable speed control for heavy steel fabrication. It is built for users who prioritize raw power and precise alignment over digital displays. Its titanium-magnesium alloy guide rail ensures durability during long industrial shifts.
However, you might want a different spec, size, feature, or brand. Some buyers need a lower wattage for tighter spaces, while others require a larger 2-inch capacity for heavy structures. Others may prefer a low-profile design for confined areas. The alternatives on this list were chosen because their specs overlap with the original. Each option shares the magnetic configuration and metalworking focus but adjusts dimensions, power, or included accessories to fit your specific workflow.
Comparing alternatives to DEXSO
VEVOR 1300W 1.57-Inch Magnetic Drill Press
The VEVOR 1300W Magnetic Drill Press uses a 1300W motor, which is 350W less powerful than the DEXSO. It weighs 28.2 pounds, making it 6 pounds lighter than the DEXSO. This model includes a 11-piece bit kit, offering immediate readiness for steel fabrication tasks. The DEXSO provides higher torque and a wider 6-inch cutting width attribute. You should choose the VEVOR if you need a lighter tool with included bits for moderate duty work. The lower wattage may limit performance on very thick steel compared to the DEXSO.
ZELCAN 1550W 2-Inch Magnetic Drill Press
The ZELCAN 1550W Magnetic Drill Press offers a 2-inch cutting capacity, exceeding the DEXSO's 1.57-inch limit. It features a 1550W motor and 3125 lbf holding force, which is stronger than the DEXSO's 2922 lbf. However, it weighs 45.9 pounds, significantly heavier than the DEXSO's 34.2 pounds. This makes it less portable. You should select the ZELCAN for heavy fabrication requiring larger holes and maximum holding power. The increased weight reduces ease of movement on job sites compared to the more balanced DEXSO.
Zinnore 1150W Magnetic Drill Press
The Zinnore 1150W Magnetic Drill Press has a 1150W motor, which is 500W less than the DEXSO. It is designed for vertical drilling and tapping in tight spaces. The unit measures 16.9 inches in length, making it longer than the DEXSO. It weighs 32.3 pounds, slightly lighter than the DEXSO. This model sacrifices raw power for specialized positioning. You should pick the Zinnore if your work involves precise tapping in confined areas rather than heavy-duty drilling. The lower wattage limits its ability to cut large diameters quickly compared to the DEXSO.
Vimke 1380W Low Profile Magnetic Drill Press
The Vimke 1380W Low Profile Magnetic Drill Press is designed for tight spaces with a compact low profile design. It weighs less than the DEXSO, though exact weight is not listed. The DEXSO offers 1650W power and variable speed control, which this model may lack or offer differently. The Vimke prioritizes portability and safety in confined areas. You should choose the Vimke for drilling in restricted spaces where the DEXSO's larger footprint is a disadvantage. It gives up the DEXSO's higher power output and specific speed control features for a smaller form factor.
iMeshbean 1380W Low Profile Magnetic Drill Press
The iMeshbean 1380W Low Profile Magnetic Drill Press features a 1380W motor, which is 270W less than the DEXSO. It weighs 28 pounds, making it 6.2 pounds lighter than the DEXSO. This model emphasizes high magnetic force and compactness. It lacks the DEXSO's variable speed control and larger boring diameter. You should select the iMeshbean if you need a lighter, low-profile tool for tight spaces with strong holding power. It is less suitable for heavy steel fabrication requiring the DEXSO's higher power and larger hole capacity.
iMeshbean 1400W 2-Inch Magnetic Drill Press
The iMeshbean 1400W 2-Inch Magnetic Drill Press provides a 2-inch cutting capacity, larger than the DEXSO's 1.57-inch. It has a 1400W motor, which is 250W less than the DEXSO. It weighs 28 pounds, 6.2 pounds lighter than the DEXSO. This model offers strong holding power and stability for heavy-duty steel structures. You should choose this iMeshbean if you need a larger hole capacity and a lighter tool. It trades the DEXSO's higher wattage and variable speed control for increased cutting diameter and reduced weight.
Quick picks
Our 7 picks
DEXSO 1650W Magnetic Drill Press
Best for: Heavy-duty steel fabrication and metalworking
- Motor Power
- 1650W
- Spindle Speed
- 10-speed, 810 RPM
- Hole Capacity
- 1.57"
- Magnetic Force
- 2922 Lbf
- Configuration
- Magnetic
- Target Material
- Plastic
View on Amazon: DEXSO 1650W Magnetic Drill Press Affiliate link
This DEXSO magnetic drill press features a 1650W pure copper motor and a 2922 lbf holding force. It bores holes up to 1.57 inches in diameter. The unit includes variable speed control up to 810 RPM and a forward/reverse switch. It weighs 34.2 pounds and measures 10.6 inches in length. This machine suits users needing reliable power for steel fabrication and heavy-duty metalworking tasks.
Pros
- 1650W high-performance pure copper motor
- 2922 lbf magnetic holding force
- Variable speed control up to 810 RPM
- Forward and reverse switch included
Cons
- 1.57-inch maximum boring diameter is smaller than some competitors
- 34.2-pound weight may be heavy for some users
- No display for precise RPM readout
Good fit if
- You need strong holding force for thick steel
- You require variable speed for different materials
- You work on job sites requiring portability
Skip if
- You need to drill holes larger than 1.57 inches
- You prefer a lighter unit under 30 pounds
- You require a digital speed display
Verdict: DEXSO 1650W Magnetic Drill Press delivers solid power and holding force for users drilling up to 1.57 inches in diameter. It fits professionals who prioritize motor strength and variable speed control over digital displays.
VEVOR 1300W 1.57-Inch Magnetic Drill Press
Best for: steel fabrication with included bits
- Motor Power
- 1300W
- Spindle Speed
- 810 RPM
- Hole Capacity
- 1.57"
- Spindle Travel
- 2"
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
View on Amazon: VEVOR 1300W 1.57-Inch Magnetic Drill Press Affiliate link
This VEVOR magnetic drill press features a 1300W copper motor and delivers 2922lbf of holding force. It bores holes up to 1.57 inches deep with a spindle travel of 2 inches. The unit includes 11 drill bits for immediate use. Its titanium magnesium alloy rail resists corrosion. You get stable, precise drilling for steel and railway construction tasks.
Pros
- 1300W motor provides strong driving force
- 2922lbf magnetic base locks securely in place
- Includes 11 drill bits for various diameters
- Titanium magnesium alloy guide rail resists wear
Cons
- Lower 1300W motor power compared to 1650W competitors
- Smaller 1.57-inch boring diameter limit
- Heavier 28.2-pound build affects portability
Good fit if
- You need a complete kit with 11 drill bits
- You require high holding force for vertical drilling
- You work with steel structures or railway manufacturing
Skip if
- You need to bore holes larger than 1.57 inches
- You require the highest available motor wattage
- You prioritize lightweight portability for frequent moves
Verdict: VEVOR 1300W Magnetic Drill Press suits users who want a ready-to-use kit with strong holding force. It fits steel fabrication tasks where a 1.57-inch capacity is sufficient.
ZELCAN 1550W 2-Inch Magnetic Drill Press
Best for: Large hole drilling on heavy steel
- Motor Power
- 1550W
- Spindle Speed
- 650 rpm
- Hole Capacity
- 2"
- Spindle Travel
- 2"
- Magnetic Force
- 3125 lbf / 13900N
- Configuration
- Magnetic
View on Amazon: ZELCAN 1550W 2-Inch Magnetic Drill Press Affiliate link
The ZELCAN 1550W magnetic drill press anchors to steel with 3125 lbf of force. Its 1550W motor drives a 2-inch boring capacity at 650 rpm. You get a 2-inch spindle travel and a 16.9 fl. oz. coolant tank to manage heat. This unit includes six drill bits for immediate use. It suits fabrication and industrial work where portability and strong hold matter.
Pros
- 1550W copper motor for rapid drilling
- 3125 lbf magnetic force for secure anchoring
- 2-inch hole capacity for large openings
- Stepless speed control for precise adjustments
- 16.9 fl. oz. coolant tank for heat management
Cons
- Heavier build at 45.9 pounds
- Lower spindle speed than competitors
- Limited to ferrous surfaces only
Good fit if
- You need strong holding power on vertical steel
- You drill large holes up to 2 inches
- You want included drill bits for immediate use
Skip if
- You require high-speed drilling over 650 rpm
- You need to drill non-ferrous materials
- You prefer a lighter unit under 40 pounds
Verdict: ZELCAN 1550W Magnetic Drill Press delivers robust 3125 lbf holding power and a 2-inch capacity. It fits heavy fabrication tasks where secure anchoring and large hole sizes are priorities.
Zinnore 1150W Magnetic Drill Press
Best for: Vertical drilling and tapping in tight spaces
- Motor Power
- 1150W
- Hole Capacity
- 5/8 in (16 mm)
- Magnetic Force
- 2360 lbs / 10500N
- Configuration
- Magnetic
- Target Material
- Metal
- Design
- Portable
View on Amazon: Zinnore 1150W Magnetic Drill Press Affiliate link
The Zinnore mag drill press offers 1150W of power with a 2360 lbs magnetic force for secure attachment on vertical or sloped surfaces. It handles twist drilling up to 5/8 inch and supports tapping from M5 to M12. The portable design fits constrained spaces, making it suitable for steel fabrication and home improvement tasks where stability matters.
Pros
- 1150W motor delivers reliable power for metal drilling
- 2360 lbs magnetic force ensures stability on vertical surfaces
- Supports both drilling up to 5/8 inch and tapping M5-M12
- Compact dimensions fit into tight workspaces
Cons
- Lower 1150W motor power compared to 1300W+ alternatives
- Smaller 5/8 inch hole capacity limits large-scale boring
- Heavier 32.3 lb weight reduces portability
Good fit if
- You need stable drilling on vertical or sloped metal surfaces
- You require both drilling and tapping capabilities in one tool
- You work in constrained spaces where compact size matters
Skip if
- You need to drill holes larger than 5/8 inch
- You require higher power for heavy industrial steel fabrication
- You prioritize lightweight portability over magnetic holding force
Verdict: Zinnore 1150W Magnetic Drill Press suits users needing reliable vertical drilling with tapping support, though its smaller capacity and lower power may limit heavy-duty use.
Vimke 1380W Low Profile Magnetic Drill Press
Best for: tight space drilling tasks
- Motor Power
- 1380W
- Spindle Speed
- up to 680 RPM
- Hole Capacity
- 1.4 in
- Spindle Travel
- 1.8 in
- Magnetic Force
- 11500 N (2585 lbf)
- Chuck Capacity
- 3/4 in
View on Amazon: Vimke 1380W Low Profile Magnetic Drill Press Affiliate link
The Vimke 1380W magnetic drill press features a low profile design for tight spaces. It offers a 2585 lbf magnetic force and a 1.4-inch hole capacity. The 680 RPM speed suits deep drilling tasks. Its compact build fits hard-to-reach areas. This unit is ideal for industrial or construction work where portability and safety matter.
Pros
- 1380W pure copper motor for efficient drilling
- 2585 lbf magnetic force with double-coil safety
- Low profile design fits tight spaces
- 1.4-inch maximum hole capacity
Cons
- Lower 2585 lbf magnetic force than competitors
- Smaller 1.4-inch hole capacity limit
- Fixed 680 RPM speed without adjustment
Good fit if
- You need to drill in tight, hard-to-reach areas
- You require a lightweight, portable mag drill
- You work with steel or cast iron materials
Skip if
- You need to drill holes larger than 1.4 inches
- You require variable speed control for different materials
- You need a magnetic force exceeding 2585 lbf
Verdict: Vimke 1380W Low Profile Mag Drill is a compact solution for users who prioritize portability and safety in confined spaces over maximum hole size or speed versatility.
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: tight space drilling with high magnetic force
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press Affiliate link
The iMeshbean 1380W magnetic drill press features a low profile design for tight spaces. It delivers 2585 lbf of magnetic force and drills up to 1.4 inches in diameter. The 680 RPM motor handles steel and cast iron. This compact unit weighs 28 pounds and includes a 3/4 inch chuck. It suits users needing portable, high-force drilling in confined industrial or construction areas.
Pros
- 1380W pure copper motor provides reliable power
- 2585 lbf magnetic base ensures secure attachment
- Low profile design fits into tight areas
- Drills holes up to 1.4 inches in diameter
Cons
- 1.4 inch hole capacity is smaller than competitors
- Fixed 680 RPM speed lacks variable adjustment
- 28 pound weight is heavier than lighter models
Good fit if
- You need to drill in confined spaces
- You require strong magnetic holding force
- You work with steel or cast iron
Skip if
- You need to drill holes larger than 1.4 inches
- You require variable speed control for different materials
- You need a lightweight unit under 20 pounds
Verdict: The iMeshbean 1380W Low Profile Mag Drill is a solid choice for professionals who prioritize magnetic strength and compactness over variable speed or larger hole capacities.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: heavy-duty steel structure drilling
- Motor Power
- 1400W
- Spindle Speed
- 810 RPM (10 speeds)
- Hole Capacity
- 2 in
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Target Material
- Metal
View on Amazon: iMeshbean 1400W 2-Inch Magnetic Drill Press Affiliate link
This iMeshbean magnetic drill press features a 1400W motor and delivers 2922lbf of holding force. It bores holes up to 2 inches in diameter at speeds up to 810 RPM. The unit includes a cooling pot and dual dovetail guide rails for stability. It suits users needing high torque for thick steel plates or structural metal work in industrial settings.
Pros
- 1400W copper motor for high intensity drilling
- 2922lbf magnetic base with dual coil design
- 2-inch hole capacity for large diameter cuts
- Stepless speed control with 10 settings
- Self-locking drill bit system for quick changes
Cons
- Lower spindle speed of 810 RPM compared to faster alternatives
- Heavier 28-pound build limits portability
- No included drill bits or cutters in the data
Good fit if
- You need to drill large holes in thick steel plates
- You require high magnetic holding force for vertical work
- You want a motor with a dedicated cooling pot
Skip if
- You need to drill holes larger than 2 inches
- You require high-speed drilling above 810 RPM
- You prioritize a lightweight unit under 20 pounds
Verdict: The iMeshbean 1400W Magnetic Drill Press offers strong holding power and a large 2-inch capacity for heavy-duty metal work. It fits users who prioritize torque and stability over high-speed precision or lightweight portability.
Specifications side by side
| Spec | DEXSO 1650W Magnetic Drill Press | VEVOR 1300W 1.57-Inch Magnetic Drill Press | ZELCAN 1550W 2-Inch Magnetic Drill Press | Zinnore 1150W Magnetic Drill Press | Vimke 1380W Low Profile Magnetic Drill Press | iMeshbean 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|---|---|---|---|---|
| Motor Power | 1650W | 1300W | 1550W | 1150W | 1380W | 1380W | 1400W |
| Spindle Speed | 10-speed, 810 RPM | 810 RPM | 650 rpm | not stated | up to 680 RPM | 680 RPM | 810 RPM (10 speeds) |
| Hole Capacity | 1.57" | 1.57" | 2" | 5/8 in (16 mm) | 1.4 in | 1.4 in (35 mm) | 2 in |
| Spindle Travel | not stated | 2" | 2" | not stated | 1.8 in | 1.8 in (45 mm) | not stated |
| Magnetic Force | 2922 Lbf | 2922lbf / 13000N | 3125 lbf / 13900N | 2360 lbs / 10500N | 11500 N (2585 lbf) | 2585 lbf (11500N) | 2922lbf / 13000N |
| Chuck Capacity | not stated | not stated | not stated | not stated | 3/4 in | 3/4 in | not stated |
| Configuration | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic |
| Motor Wattage | not stated | 1300W | 1550W | not stated | not stated | not stated | not stated |
| Target Material | Plastic | Metal | Metal | Metal | not stated | Metal | Metal |
| Design | not stated | Portable | not stated | Portable | Low Profile | Low Profile | not stated |
| Cutting Capacity | not stated | not stated | 2-Inch | not stated | not stated | not stated | 2-Inch |
| Cutting Width | not stated | 6-Inch | not stated | not stated | not stated | not stated | not stated |
| Dimensions | 10.6 × 4.7 × 14.2 inches | 4.7 × 14.2 × 10.6 inches | 13 × 5.51 × 15.7 inches | 16.9 × 8.54 × 17.3 inches | 11 × 3.9 × 8.3 inches | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 34.2 pounds | 28.2 pounds | 45.9 pounds | 32.3 pounds | not stated | 28 pounds | 28 pounds |
| Size | 1650W-1.57" with Speed Control | 1.6 in 11PCS | Update 1550W | not stated | not stated | not stated | not stated |
| Model | bka-TWd-EmKVzUA4TSAiWONTbM-zx | Magnetic Drill | 18031 | ZE1612 | WF23824X | WF23824 | WF21456 |
| Color | not stated | multi | Blue | not stated | not stated | multi | multi |
Frequently asked questions
Which magnetic drill press has the largest drilling capacity?
The ZELCAN 1550W and iMeshbean 1400W models both feature a 2-inch cutting capacity. This exceeds the 1.57-inch limit of the DEXSO 1650W. These machines suit heavy steel fabrication where large holes are necessary. The ZELCAN model offers 3125 lbf of holding force. The iMeshbean variant provides strong torque for stable operation on thick metal structures.
What is the lightest magnetic drill press in this list?
The iMeshbean 1380W Low Profile Magnetic Drill Press weighs 28 pounds. It ties with the VEVOR 1300W model for the lightest weight. The VEVOR includes an 11-piece bit kit. The iMeshbean offers a compact design for tight spaces. Both are significantly lighter than the 45.9-pound ZELCAN 1550W unit.
Which model is best for drilling in tight spaces?
The Vimke 1380W and iMeshbean 1380W Low Profile Magnetic Drill Presses are designed for confined areas. The Vimke measures only 3.9 inches in width. The iMeshbean model shares these compact dimensions. Their low profile allows access to restricted zones. They prioritize portability and safety over maximum hole size or speed versatility.
Does any alternative include drill bits with the purchase?
Yes, the VEVOR 1300W Magnetic Drill Press includes an 11-piece bit kit. This makes it ready for immediate use upon arrival. Other models like the DEXSO 1650W do not list included bits in their specifications. The VEVOR is ideal if you want a complete setup for steel fabrication tasks without buying extra accessories.
Which magnetic drill press has the strongest holding force?
The ZELCAN 1550W Magnetic Drill Press provides 3125 lbf of holding force. This is higher than the DEXSO 1650W's 2922 lbf. Strong holding power ensures stability when drilling large holes in heavy steel. The ZELCAN model is best for users who prioritize secure anchoring during heavy-duty metalworking operations.
Is there a magnetic drill press suitable for vertical drilling and tapping?
The Zinnore 1150W Magnetic Drill Press supports vertical drilling and tapping functions. It is designed for portable use in various positions. However, its 1150W motor and smaller capacity may limit heavy-duty applications. It suits users needing reliable performance in tight spaces rather than maximum power for thick steel fabrication.