WOODSTARTER 6-Inch Benchtop Jointer 15 Alternatives: 6 Similar Picks Compared

How each alternative compares

VEVOR 6-Inch 2 HP Straight Knife Jointer

The VEVOR 6-Inch 2 HP Straight Knife Jointer swaps the WOODSTARTER’s 15 Amp motor for a 2 HP unit, which typically offers higher torque for dense hardwoods. It retains the 6-inch cutting width and benchtop configuration but uses a straight knife cutterhead instead of the WOODSTARTER’s dual HSS knives. This model is slightly lighter at 21.2 pounds, making it marginally more portable. You lose the adjustable fence tilt range found on the WOODSTARTER, limiting you to standard 90-degree cuts. If you prioritize raw motor power and a lower price point over adjustable bevels, this budget-friendly option fits small workshops well.

VEVOR 8-Inch Spiral Benchtop Jointer

The VEVOR 8-Inch Spiral Benchtop Jointer significantly increases the cutting width from 6 inches to 8 inches, allowing you to joint wider boards in a single pass. It replaces the straight knives with a spiral cutterhead, which generally reduces tear-out and vibration for a smoother finish. However, it is much heavier at 35.7 pounds and larger in footprint, requiring more bench space. The motor power is listed as 2 HP, but the spiral head design changes the cutting dynamics compared to the WOODSTARTER’s direct knife action. Choose this if you regularly work with wider stock and value finish quality over maximum RPM speed and portability.

Wahuda 6-Inch Spiral Benchtop Jointer

The Wahuda 6-Inch Spiral Benchtop Jointer offers a spiral cutterhead for quieter operation and reduced tear-out compared to the WOODSTARTER’s straight HSS knives. It has a lower amperage rating at 10 Amp, which may result in slower material removal rates on very hard woods. The machine features cast iron tables, which provide greater stability and flatness than the typical aluminum tables on lighter benchtop models. It lacks the adjustable fence tilt range of the WOODSTARTER, restricting you to 90-degree edge jointing. This model is best for users who prioritize precision, stability, and quiet performance over high-speed material removal.

Cutech 8-Inch Spiral Jointer with Cast Iron Tables

The Cutech 8-Inch Spiral Jointer with Cast Iron Tables expands your capacity with an 8-inch cutting width, handling wider boards than the 6-inch WOODSTARTER. It uses a spiral cutterhead for a smoother surface finish and cast iron tables for improved stability and vibration dampening. The 10 Amp motor is less powerful than the WOODSTARTER’s 15 Amp unit, which may affect performance on dense hardwoods. This model is significantly larger and heavier, requiring a dedicated workspace rather than a movable bench setup. Select this jointer if you need extra width and superior table stability, and do not require the portability or high RPM speed of the WOODSTARTER.

Cutech 6-Inch Spiral Cutterhead Jointer

The Cutech 6-Inch Spiral Cutterhead Jointer matches the WOODSTARTER’s 6-inch cutting width but switches to a spiral cutterhead for a quieter, smoother cut with less tear-out. It uses a 10 Amp motor, which is less powerful than the WOODSTARTER’s 15 Amp motor, potentially resulting in slower feed rates. The machine includes a fence for alignment but lacks the adjustable tilt range found on the WOODSTARTER. It is heavier and larger, weighing more and taking up more bench space. This option is ideal for woodworkers who prioritize finish quality and table durability over raw power and adjustable bevel capabilities.

WOODERS 6-Inch 15-Amp Benchtop Jointer

The WOODERS 6-Inch 15-Amp Benchtop Jointer mirrors the WOODSTARTER’s 15 Amp motor power and 6-inch cutting width, ensuring similar material removal capabilities. It shares the lightweight design, weighing 21 pounds, which aids in portability for hobbyists. However, the product data does not specify a fence tilt range, suggesting it may only offer standard 90-degree cuts, unlike the WOODSTARTER’s 90–135° adjustable fence. It also lacks details on cutterhead type, so you cannot confirm if it uses straight or spiral knives. Choose this model if you need a comparable power-to-weight ratio for narrow hardwoods but do not require adjustable bevel cuts.

Quick picks

Our 7 picks

1 Best overall

WOODSTARTER 6-Inch 15-Amp Benchtop Jointer

Best for: Small workshop DIYers jointing narrow boards

Cutting Width

6-Inch

Configuration

Benchtop

Motor Power

15 Amp

Blade Count

2

Fence Tilt

90° to 135°

Swing

8-Inch

View on Amazon: WOODSTARTER 6-Inch 15-Amp Benchtop Jointer Affiliate link

The WOODSTARTER 6-Inch Benchtop Jointer features a 15 Amp motor running at 12,000 RPM. It includes two HSS blades for smooth cuts and an adjustable fence that tilts from 90° to 135°. Weighing 23.3 pounds, this compact unit fits small workshops. It suits DIYers needing precise edge jointing and flattening for boards up to 6 inches wide.

Pros

• 15 Amp motor delivers 12,000 RPM for fast material removal
• Fence adjusts from 90° to 135° for versatile angle cuts
• Includes dual high-speed steel blades for sharp, burr-free results
• Lightweight design at 23.3 pounds for easy workshop mobility

Cons

• Standard two-blade setup produces more tear-out than spiral heads
• 6-inch cutting width limits board size compared to 8-inch models
• Motor amperage is lower than the 2 HP options on this list

Good fit if

• You need a lightweight jointer for a small workspace
• You primarily work with boards under 6 inches wide
• You want a fence that tilts for angled jointing tasks

Skip if

• You require spiral cutterheads for superior surface finish
• You frequently joint boards wider than 6 inches
• You need a high-torque 2 HP motor for dense hardwoods

Verdict: WOODSTARTER 6-Inch Benchtop Jointer offers a compact, high-speed solution for DIYers working with narrow boards. It fits small shops where weight and space matter more than heavy-duty capacity.

2 Also great

VEVOR 6-Inch 2 HP Straight Knife Jointer

Best for: DIY users with limited workshop space

Cutting Width

6 in.

Cutterhead Style

Straight knife

Configuration

Benchtop

Motor Power

2 HP

Table Length

23 in.

Blade Count

2

View on Amazon: VEVOR 6-Inch 2 HP Straight Knife Jointer Affiliate link

This VEVOR benchtop jointer features a 2 HP motor running at 12,000 RPM with a 6-inch cutting width. It uses a straight knife cutterhead with two HSS blades. The table measures 23 inches in length. The unit weighs 21.2 pounds and includes a dust port. It suits DIY users needing smooth surfaces on softwood or hardwood in small studios.

Pros

• 2 HP motor delivers 12,000 RPM for efficient cutting
• 6-inch cutting width handles standard board widths
• 23-inch table length supports longer workpieces
• Straight knife cutterhead provides smooth wood surfaces

Cons

• Straight knife cutterhead requires more frequent sharpening than spiral heads
• 21.2-pound weight offers less vibration dampening than cast iron models
• Limited depth adjustment range of 0 to 1/8 inch

Good fit if

• You need a compact tool for small workshops
• You prioritize high RPM speed for smooth cuts
• You work with softwoods and standard hardwoods

Skip if

• You require spiral cutterhead technology for noise reduction
• You need heavy cast iron construction for stability
• You frequently joint wide boards exceeding 6 inches

Verdict: VEVOR 6-Inch Benchtop Jointer 2 HP is a solid choice for DIYers who value speed and compact size over heavy-duty stability. It fits small studios where space is limited and high RPM performance is key.

3 Also great

VEVOR 8-Inch Spiral Benchtop Jointer

Best for: Wider boards and hardwood jointing

Cutting Width

8 in.

Cutterhead Style

Spiral

Configuration

Benchtop

Motor Power

2 HP

Table Length

36.2 in.

Blade Count

18

View on Amazon: VEVOR 8-Inch Spiral Benchtop Jointer Affiliate link

This VEVOR benchtop jointer features an 8-inch cutting width and a 2 HP motor running at 8500 RPM. It uses an 18-blade spiral cutterhead to deliver smooth surfaces on wood and aluminum. The extendable table reaches 36.2 inches in length, providing ample workspace for medium to large projects. You can adjust the planing depth from 0 to 1/8 inch for precise cuts. A dust port helps keep your workspace clean during operation.

Pros

• 8-inch cutting width for wider boards
• 2 HP motor handles hardwoods efficiently
• 18-blade spiral cutterhead reduces maintenance
• 36.2-inch extendable table for large stock

Cons

• Lower 8500 RPM speed compared to 12000+ RPM competitors
• Heavier 35.7-pound build requires stable mounting
• No fence adjustment details provided in specs

Good fit if

• You need an 8-inch capacity for wider boards
• You prefer the smooth finish of a spiral cutterhead
• You work with dense hardwoods requiring high torque

Skip if

• You require a 6-inch or smaller footprint
• You need high-speed 12000+ RPM performance
• You only work with softwoods and small pieces

Verdict: VEVOR 8-Inch Spiral Benchtop Jointer suits woodworkers who prioritize cutting width and spiral head quality over maximum RPM speed. It is a robust option for handling wider hardwood stock.

4 Also great

Wahuda 6-Inch Spiral Benchtop Jointer

Best for: smooth spiral cuts on figured wood

Cutting Width

6-inch

Cutterhead Style

Spiral

Configuration

Benchtop

Motor Power

10amp

Voltage

120V

Fence Tilt

90° to 135°

View on Amazon: Wahuda 6-Inch Spiral Benchtop Jointer Affiliate link

This benchtop wood jointer pairs a 6-inch cutting width with a spiral cutterhead using 4-sided carbide inserts. Its 120-volt, 10-amp motor runs the cutterhead at 12,000 RPM. You get cast iron tables measuring 34 inches long overall, along with an adjustable fence that tilts from 90 to 135 degrees for bevel cuts.

Pros

• Spiral cutterhead equipped with 4-sided carbide inserts
• Cast iron tables provide stable workpiece support
• Fence tilts from 90 to 135 degrees
• Cutterhead runs at 12,000 RPM

Cons

• Motor draws 10 amps, lower than 15-amp alternatives
• Six-inch model lacks table extension rods

Good fit if

• You need a spiral cutterhead with rotatable 4-sided carbide inserts.
• You want cast iron beds on a portable 34-inch benchtop machine.
• You regularly joint bevels between 90 and 135 degrees.

Skip if

• You need a 15-amp motor for demanding stock removal.
• You require built-in table extension rods for long boards.

Verdict: Wahuda Tools 6-Inch Spiral Cutterhead Jointer fits woodworkers who prioritize four-sided carbide inserts and cast iron stability within a compact shop footprint.

5 Best premium

Cutech 8-Inch Spiral Jointer with Cast Iron Tables

Best for: Wider boards and smooth spiral cuts

Cutting Width

8 in.

Cutterhead Style

Spiral

Configuration

Benchtop

Motor Power

10A

Blade Count

16

Fence Tilt

90° and 135°

View on Amazon: Cutech 8-Inch Spiral Jointer with Cast Iron Tables Affiliate link

This Cutech 8-inch benchtop jointer features a spiral cutterhead with 16 tungsten carbide inserts. It offers an 8-inch cutting width and a 24-inch adjustable aluminum fence. The 10-amp motor provides steady power for smooth finishes. Its cast iron tables and guide post ensure parallel alignment. This tool suits users needing wider jointing capacity and precise, low-vibration cuts for larger stock.

Pros

• 8-inch cutting width for wider boards
• Spiral cutterhead with 16 two-sided inserts
• 24-inch adjustable aluminum fence with quick stops
• Cast iron tables with guide post for parallel alignment
• 10-amp motor with low amp draw design

Cons

• 10-amp motor is less powerful than 15-amp competitors
• Aluminum fence may flex under heavy loads compared to cast iron
• Heavier and bulkier footprint than 6-inch models

Good fit if

• You need to joint boards wider than 6 inches
• You want a spiral cutterhead for a smoother finish
• You require a long fence for stabilizing wide stock

Skip if

• You only work with narrow stock under 6 inches
• You need maximum motor power for dense hardwoods
• You have limited benchtop space for a 34-inch unit

Verdict: Cutech 8-Inch Spiral Benchtop Jointer fits woodworkers who need extra width and precision. It delivers smooth cuts with its spiral head and stable tables, making it ideal for wider projects.

6

Cutech 6-Inch Spiral Cutterhead Jointer

Best for: Smooth finishes and durable tables

Cutting Width

6 in.

Cutterhead Style

Spiral

Configuration

Benchtop

Motor Power

10A

Blade Count

12

Fence Tilt

90° and 135°

View on Amazon: Cutech 6-Inch Spiral Cutterhead Jointer Affiliate link

The Cutech 40160HB is a 6-inch benchtop jointer featuring a spiral cutterhead with 12 two-sided inserts. It uses a 10 Amp motor and includes a 19-5/8 inch adjustable fence. The tables have a 6H teflon coating for durability. This model suits users seeking smooth finishes with reduced noise. It is ideal for those who value precise depth control and low amp draw during operation.

Pros

• Spiral cutterhead with 12 two-sided inserts for smooth finish
• 6H teflon-coated aluminum tables resist scratches
• Adjustable fence tilts to 90° and 135°
• Low amp draw compared to standard cutters

Cons

• 10 Amp motor is less powerful than 15 Amp competitors
• 6-inch cutting width limits wider stock
• Benchtop configuration may vibrate on lighter workbenches

Good fit if

• You want a quieter spiral cutterhead jointer
• You need precise depth of cut with a clear pointer
• You value durable, coated table surfaces

Skip if

• You require an 8-inch cutting width
• You need a high-power 15 Amp or 2 HP motor
• You prefer a cast iron table over aluminum

Verdict: Cutech 6-Inch Spiral Benchtop Jointer fits users who prioritize finish quality and table durability over raw motor power. It is a solid choice for precise, low-vibration jointing tasks.

7 Best budget

WOODERS 6-Inch 15-Amp Benchtop Jointer

Best for: portable hardwood jointing and bevel work

Cutting Width

6 in.

Configuration

Benchtop

Motor Power

15 A

Table Length

22.8 in.

Fence Tilt

90° to 135°

Amperage

15 Amp

View on Amazon: WOODERS 6-Inch 15-Amp Benchtop Jointer Affiliate link

The WOODERS 6-Inch Benchtop Jointer features a 15-amp motor running at 13,000 RPM. It includes a 22.8-inch precision-milled aluminum table and a 6-inch cutting width. The adjustable fence tilts from 90 to 135 degrees for bevel work. Weighing 21 pounds, this compact unit suits small workshops. It offers precise depth control up to 1/8 inch for smooth finishes on hardwoods.

Pros

• 15-amp pure copper motor delivers 13,000 RPM
• 22.8-inch precision-milled aluminum table reduces flex
• Fence tilts from 90° to 135° for bevels
• Adjustable cutting depth from 0 to 1/8 inch
• Lightweight 21-pound design for portability

Cons

• Standard straight blade cutterhead limits finish quality
• 6-inch capacity restricts wider board jointing
• No variable speed control listed in specs

Good fit if

• You need a portable jointer for small garages
• You frequently cut hardwoods requiring high RPM
• You require a fence that tilts for bevels

Skip if

• You regularly joint boards wider than 6 inches
• You prefer the smooth cut of a spiral head
• You need a heavy cast iron table for stability

Verdict: The WOODERS 6-Inch Benchtop Jointer fits hobbyists who value high RPM power and portability in a compact 21-pound frame. It is ideal for narrow hardwoods and bevel work but not for wide stock.

Specifications side by side

Frequently asked questions

See also

• asus zenscreen mb16acv 15 6 inch alternatives
• lenovo ideapad 15 6 inch touchscreen HD alternatives