iMeshbean 1380W Low Profile Magnetic Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for imeshbean 1380w low profile magnetic alternatives because this specific model serves a very narrow use case. The iMeshbean 1380W Low Profile Magnetic Drill Press excels in tight spaces with its compact 3.9-inch width and 8.3-inch height. It provides strong holding power of 2585 lbf and drills holes up to 1.4 inches at 680 RPM. However, you might need a different machine if you require larger hole capacities, variable speed control, or a different motor wattage for heavier steel fabrication tasks.
The 6 picks in this list were chosen because their specifications overlap with the original product. Each alternative shares key attributes like magnetic configuration, metal target material, or low profile design. Some options offer higher magnetic force or larger cutting diameters, while others prioritize portability or variable speed settings. You can compare these models based on their published specs to find the tool that matches your specific drilling requirements and workspace constraints.
How each alternative compares
ZELCAN 1550W 2-Inch Magnetic Drill Press
The ZELCAN 1550W Magnetic Drill Press offers a larger 2-inch hole capacity compared to the iMeshbean’s 1.4-inch limit. It uses a 1550W motor, which is more powerful than the iMeshbean’s 1380W unit, and weighs 45.9 pounds. This makes it significantly heavier and less portable than the 28-pound iMeshbean model. The ZELCAN is taller at 15.7 inches, so it does not fit as easily into very low-clearance spaces. You should choose this if you need to drill larger holes in heavy steel and do not mind the extra weight and height for better cutting capacity.
VEVOR Low Profile Magnetic Drill Press
The VEVOR Low Profile Magnetic Drill Press is similar in dimensions to the iMeshbean, sharing the same 3.9-inch width and 8.3-inch height. However, it weighs only 23.2 pounds, making it lighter and easier to carry than the 28-pound iMeshbean. It features a 1300W motor, which is slightly less powerful than the iMeshbean’s 1380W motor. The VEVOR focuses on portability and compactness without sacrificing the low-profile design needed for tight spaces. Pick this model if you prioritize the lightest possible weight for frequent site moves while maintaining a similar footprint and low height.
Zinnore 1150W Magnetic Drill Press
The Zinnore 1150W Magnetic Drill Press is designed for portability but differs significantly in size. It is taller at 17.3 inches and wider at 8.54 inches, making it less suitable for tight, low-clearance areas compared to the iMeshbean’s compact 3.9-inch width. It weighs 32.3 pounds, which is heavier than the iMeshbean. The Zinnore has a lower 1150W motor power, reducing its overall drilling force. You should select this if you need a dedicated portable unit for tapping and drilling on vertical surfaces where the iMeshbean’s specific low-profile shape is not required.
Vimke 1380W Low Profile Magnetic Drill Press
The Vimke 1380W Low Profile Magnetic Drill Press shares the exact same dimensions as the iMeshbean, measuring 3.9 inches wide and 8.3 inches high. It is designed for the same low-height applications and portable tasks. The data does not list a weight for the Vimke, but its identical footprint suggests similar handling characteristics. It offers the same 1380W motor power rating. Choose the Vimke if you prefer its specific build quality or availability while needing the exact same compact dimensions and low-profile design for confined workspace drilling.
iMeshbean 1400W 2-Inch Magnetic Drill Press
The iMeshbean 1400W 2-Inch Magnetic Drill Press provides a much larger 2-inch cutting capacity than the original’s 1.4-inch limit. It features a 1400W motor, offering more power than the 1380W unit. However, it is not low-profile; it is 14.2 inches wide and 10.6 inches high, making it bulkier and less suitable for tight spaces. It weighs the same 28 pounds. This model is ideal for users who need to drill larger holes in heavy steel structures and do not require the compact, low-height design of the original iMeshbean.
iMeshbean 1400W 2-Inch Magnetic Drill Press
The iMeshbean 1400W 2-Inch Magnetic Drill Press with variable speed offers a 2-inch hole capacity, surpassing the original’s 1.4-inch limit. It has a 1400W motor, which is more powerful than the 1380W unit. This model includes variable speed control, a feature not specified for the original fixed-speed unit. It is larger, measuring 14.2 inches wide and 10.6 inches high, so it lacks the compact low-profile design. Select this if you need variable speed precision and larger drilling capacity, and you do not need the tight-space compatibility of the original.
Quick picks
Our 7 picks
iMeshbean 1380W Low Profile Magnetic Drill Press
Best for: tight spaces and vertical steel drilling
- Motor Power
- 1380W
- Spindle Speed
- 680 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Spindle Travel
- 1.8 in (45 mm)
- Magnetic Force
- 2585 lbf (11500N)
- Chuck Capacity
- 3/4 in
View on Amazon: iMeshbean 1380W Low Profile Magnetic Drill Press
The iMeshbean 1380W magnetic drill press offers a low profile design for tight spaces. It features a 1380W motor reaching 680 RPM and a magnetic force of 2585 lbf. The unit handles up to 1.4-inch holes with a 3/4-inch chuck capacity. Its compact dimensions and detachable parts make it portable. This machine suits users needing reliable performance on metal surfaces in confined areas.
Pros
- 1380W pure copper motor delivers up to 680 RPM
- 2585 lbf magnetic attraction force ensures secure attachment
- Low profile design fits into tight, hard-to-reach areas
- Handles 1.4-inch maximum core drilling diameter
Cons
- 1.4-inch hole capacity is smaller than the 2-inch options on this list
- 680 RPM speed is lower than competitors reaching higher speeds
- Chuck capacity limited to 3/4-inch, restricting bit sizes
Good fit if
- You need a drill for tight spaces with low overhead
- You require strong magnetic hold on vertical steel surfaces
- You work with materials like steel or cast iron
Skip if
- You frequently drill holes larger than 1.4 inches
- You need a chuck capacity larger than 3/4 inch
- You prefer higher spindle speeds for faster material removal
Verdict: The iMeshbean 1380W Low Profile Mag Drill provides strong holding power and compact dimensions for confined workspaces. It fits buyers who prioritize portability and safety features over maximum hole size and speed.
ZELCAN 1550W 2-Inch Magnetic Drill Press
Best for: Heavy-duty metal fabrication and steel work
- Motor Power
- 1550W
- Spindle Speed
- 650 rpm
- Hole Capacity
- 2"
- Spindle Travel
- 2"
- Magnetic Force
- 3125 lbf / 13900N
- Configuration
- Magnetic
This Zelcan magnetic drill press features a 1550W motor and 3125 lbf holding force. It drills holes up to 2 inches in diameter and depth. The unit includes six drill bits for common sizes. You get stepless speed control and a reversible switch. The 16.9 fl oz coolant tank helps manage heat during extended use. It suits metal fabrication tasks where portability matters.
Pros
- 1550W copper motor for robust performance
- 3125 lbf magnetic force for secure anchoring
- Drills up to 2 inches in diameter and depth
- Includes six drill bits for immediate use
- 16.9 fl oz coolant tank for heat management
Cons
- Spindle speed is limited to 650 rpm
- Heavier build at 45.9 pounds
- Single speed range without variable gear options
Good fit if
- You need strong holding power for vertical drilling
- You work with ferrous metals in fabrication
- You want included bits for common hole sizes
Skip if
- You require high-speed drilling above 650 rpm
- You need a lighter unit under 40 pounds
- You drill materials other than ferrous metals
Verdict: Zelcan 1550W Magnetic Drill Press delivers high magnetic force and a powerful motor for serious metal work. It fits fabricators who prioritize holding strength and included bits over high-speed versatility.
VEVOR Low Profile Magnetic Drill Press
Best for: compact metal drilling in tight spaces
- Motor Power
- 1300 W
- Spindle Speed
- 650 RPM
- Hole Capacity
- 1.4 in (35 mm)
- Magnetic Force
- 2248 lbf / 10000 N
- Chuck Capacity
- Weldon Shank
- Configuration
- Magnetic
This VEVOR low profile magnetic drill press features a 1300W motor and 2248 lbf magnetic force. It bores holes up to 1.4 inches deep. The compact design fits tight spaces. It suits metalworkers needing portable power. The 650 RPM speed handles steel and iron. You get secure drilling on vertical or sloped surfaces.
Pros
- 1300W motor provides efficient drilling power
- 2248 lbf magnetic force for stability
- Low profile design fits tight spaces
- Overload protection prevents motor damage
Cons
- 1.4 inch boring diameter is smaller than competitors
- 650 RPM speed is fixed and lower than variable options
- Weldon shank chuck limits bit compatibility
Good fit if
- You need a compact drill for tight spaces
- You drill holes up to 1.4 inches in metal
- You work on vertical or sloped surfaces
Skip if
- You require variable speed control
- You need to bore holes larger than 1.4 inches
- You prefer standard keyless chucks
Verdict: VEVOR 1300W Low Profile Mag Drill offers strong magnetic holding power in a compact frame. It fits metalworkers who prioritize portability and stability over maximum boring diameter and speed versatility.
Zinnore 1150W Magnetic Drill Press
Best for: portable drilling and tapping on metal
- Motor Power
- 1150W
- Hole Capacity
- 5/8 in (16 mm)
- Magnetic Force
- 2360 lbs / 10500N
- Configuration
- Magnetic
- Target Material
- Metal
- Design
- Portable
The Zinnore mag drill press offers 1150W of power for drilling up to 5/8 inch holes in metal. It generates 2360 lbs of magnetic force for secure attachment to vertical or sloped surfaces. The portable design fits constrained spaces, though the listed dimensions suggest a compact footprint. It supports drilling and tapping tasks, making it suitable for fabrication and installation work where portability matters.
Pros
- 1150W motor provides efficient drilling performance
- 2360 lbs magnetic force ensures stability on metal
- Supports drilling and tapping functions
- Portable design fits elevated or tight spaces
Cons
- 5/8 inch hole capacity is smaller than 1-inch alternatives
- 1150W motor is less powerful than 1300W+ competitors
- No mention of included drill bits or accessories
Good fit if
- You need a portable drill for vertical surfaces
- You require tapping capabilities alongside drilling
- You work in constrained or elevated spaces
Skip if
- You need to drill holes larger than 5/8 inch
- You prefer a unit with included drill bits
- You require more than 1150W of motor power
Verdict: Zinnore 1150W Portable Mag Drill fits users needing portable drilling and tapping on vertical surfaces, though its smaller hole capacity limits heavy-duty use.
Vimke 1380W Low Profile Magnetic Drill Press
Best for: portable low-height drilling tasks
- Motor Power
- 1380W
- Spindle Speed
- up to 680 RPM
- Hole Capacity
- 1.4 in
- Spindle Travel
- 1.8 in
- Magnetic Force
- 11500 N (2585 lbf)
- Chuck Capacity
- 3/4 in
View on Amazon: Vimke 1380W Low Profile Magnetic Drill Press
The Vimke 1380W magnetic drill press offers a low profile design for tight spaces. It features a 1380W motor with speeds up to 680 RPM. The unit provides 2585 lbf of magnetic force to secure the base. It drills holes up to 1.4 inches in diameter with a 1.8-inch depth. This compact tool suits users needing portable power for steel or cast iron.
Pros
- 1380W pure copper motor delivers reliable power
- 2585 lbf magnetic force ensures strong hold
- Low profile design fits tight work areas
- Drills up to 1.4 inches in diameter
Cons
- Lower spindle speed of 680 RPM limits versatility
- Smaller 1.4-inch hole capacity compared to competitors
- No included drill bits or cutters listed
Good fit if
- You need a portable drill for field work
- You require strong magnetic stability on vertical surfaces
- You work in confined spaces with limited height
Skip if
- You need to drill holes larger than 1.4 inches
- You prefer higher spindle speeds for faster cutting
- You want a complete kit with included bits
Verdict: The Vimke 1380W Low Profile Mag Drill provides solid magnetic stability and compact dimensions for on-site tasks. It fits users who prioritize portability and secure mounting over maximum drilling capacity or speed.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: large holes in heavy steel structures
- Motor Power
- 1400W
- Spindle Speed
- 810 RPM (10 speeds)
- Hole Capacity
- 2 in
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Target Material
- Metal
This iMeshbean magnetic drill press features a 1400W motor and a 2-inch hole capacity. It generates 2922 lbf of magnetic force for secure attachment to metal surfaces. The unit offers ten spindle speeds up to 810 RPM and reversible operation. Its low-profile design weighs 28 pounds. You get a practical tool for drilling steel structures, pipes, and heavy plates in industrial or maintenance settings.
Pros
- 1400W copper motor for high torque
- 2922 lbf magnetic holding force
- 2-inch maximum hole capacity
- Ten variable spindle speeds up to 810 RPM
- Self-locking drill bit system
Cons
- Lower top speed than some competitors
- Heavier build at 28 pounds
- Single-speed motor limits high-RPM efficiency
Good fit if
- You need strong holding force on thick steel
- You drill holes up to 2 inches wide
- You work on vertical or overhead metal surfaces
Skip if
- You require speeds above 810 RPM
- You prefer a lighter tool under 20 pounds
- You only drill small holes under 1 inch
Verdict: iMeshbean 1400W 2-Inch Mag Drill delivers high magnetic force and a large cutting capacity for heavy-duty steel work. It suits users who prioritize holding power and hole size over maximum rotational speed.
iMeshbean 1400W 2-Inch Magnetic Drill Press
Best for: Heavy-duty metal drilling with high holding force
- Motor Power
- 1400W
- Spindle Speed
- 0-810 RPM
- Hole Capacity
- 2"
- Magnetic Force
- 2922lbf / 13000N
- Configuration
- Magnetic
- Speed Settings
- Variable Speed
This iMeshbean magnetic drill press features a 1400W motor and variable speed settings for precise metalworking. It generates 2922lbf of holding force to stay secure on steel surfaces while drilling up to a 2-inch diameter. The unit weighs 28 pounds and includes a cooling system for sustained use. It suits professionals needing portable, high-torque drilling capabilities in construction or fabrication environments.
Pros
- 1400W motor delivers strong power for rigid materials
- Variable speed control ranges from 0-810 RPM
- 2922lbf magnetic base ensures stable anchoring
- Includes 6 drill bits for various diameters
Cons
- Lower maximum speed compared to competitors reaching 2585 RPM
- Slightly heavier at 28 pounds than lighter alternatives
- Smaller 2-inch boring diameter limit
Good fit if
- You need high magnetic holding force for vertical drilling
- You require variable speed control for different materials
- You work with steel structures or shipbuilding
Skip if
- You need to drill holes larger than 2 inches
- You prefer a lighter unit under 25 pounds
- You require speeds exceeding 1000 RPM
Verdict: iMeshbean 1400W Magnetic Drill Press offers robust power and secure anchoring for heavy-duty metal applications. It is ideal for users prioritizing magnetic stability and variable speed control over maximum drilling diameter.
Specifications side by side
| Spec | iMeshbean 1380W Low Profile Magnetic Drill Press | ZELCAN 1550W 2-Inch Magnetic Drill Press | VEVOR Low Profile Magnetic Drill Press | Zinnore 1150W Magnetic Drill Press | Vimke 1380W Low Profile Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press | iMeshbean 1400W 2-Inch Magnetic Drill Press |
|---|---|---|---|---|---|---|---|
| Motor Power | 1380W | 1550W | 1300 W | 1150W | 1380W | 1400W | 1400W |
| Spindle Speed | 680 RPM | 650 rpm | 650 RPM | not specified | up to 680 RPM | 810 RPM (10 speeds) | 0-810 RPM |
| Hole Capacity | 1.4 in (35 mm) | 2" | 1.4 in (35 mm) | 5/8 in (16 mm) | 1.4 in | 2 in | 2" |
| Spindle Travel | 1.8 in (45 mm) | 2" | not specified | not specified | 1.8 in | not specified | not specified |
| Magnetic Force | 2585 lbf (11500N) | 3125 lbf / 13900N | 2248 lbf / 10000 N | 2360 lbs / 10500N | 11500 N (2585 lbf) | 2922lbf / 13000N | 2922lbf / 13000N |
| Chuck Capacity | 3/4 in | not specified | Weldon Shank | not specified | 3/4 in | not specified | not specified |
| Configuration | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic |
| Speed Settings | not specified | not specified | not specified | not specified | not specified | not specified | Variable Speed |
| Motor Wattage | not specified | 1550W | 1300W | not specified | not specified | not specified | not specified |
| Target Material | Metal | Metal | Metal | Metal | not specified | Metal | Metal |
| Design | Low Profile | not specified | Low Profile | Portable | Low Profile | not specified | not specified |
| Cutting Capacity | not specified | 2-Inch | not specified | not specified | not specified | 2-Inch | not specified |
| Dimensions | 11 × 3.9 × 8.3 inches | 13 × 5.51 × 15.7 inches | 11 × 3.9 × 8.3 inches | 16.9 × 8.54 × 17.3 inches | 11 × 3.9 × 8.3 inches | 4.7 × 14.2 × 10.6 inches | 4.7 × 14.2 × 10.6 inches |
| Weight | 28 pounds | 45.9 pounds | 23.2 pounds | 32.3 pounds | not specified | 28 pounds | 28 pounds |
| Color | multi | Blue | Machine Black + Gray + Motor Body in Orange | not specified | not specified | multi | multi |
| Model | WF23824 | 18031 | 8840E | ZE1612 | WF23824X | WF21456 | WF21456 |
| Size | not specified | Update 1550W | 1.38 in 6PCS | not specified | not specified | not specified | not specified |
If you need lower wattage ratings, consider silverstone technology low profile 95w alternatives for different benchtop clearance requirements.
Frequently asked questions
Which low profile magnetic drill is the lightest?
The VEVOR Low Profile Magnetic Drill Press is the lightest option on this list. It weighs 23.2 pounds, which is lighter than the iMeshbean 1380W at 28 pounds. The Zinnore 1150W weighs 32.3 pounds, and the ZELCAN 1550W is the heaviest at 45.9 pounds. If portability is your main priority, the VEVOR unit offers the easiest handling for on-site tasks.
What is the maximum hole capacity for these drills?
Most models in this group have a 1.4-inch cutting capacity, including the iMeshbean 1380W and the VEVOR 1300W. However, the ZELCAN 1550W and the iMeshbean 1400W 2-Inch models support a larger 2-inch hole capacity. If you need to drill larger holes in heavy steel structures, you should choose one of the 2-inch capacity options.
How does the ZELCAN 1550W compare in power?
The ZELCAN 1550W Magnetic Drill Press has a 1550W motor, which is more powerful than the iMeshbean 1380W’s 1380W motor. It also features a larger 2-inch cutting capacity. This makes it better for heavy-duty metal fabrication. The trade-off is that it is significantly heavier and taller than the low-profile alternatives.
Are there variable speed options available?
Yes, the iMeshbean 1400W 2-Inch Magnetic Drill Press (model WF21456) includes variable speed settings. This allows you to adjust the rotational speed for different materials and hole sizes. The other listed models, such as the iMeshbean 1380W Low Profile and the VEVOR, do not explicitly list variable speed in their published attributes.
Which model is best for tight vertical spaces?
The iMeshbean 1380W Low Profile Magnetic Drill Press is designed specifically for tight spaces. It measures only 3.9 inches in width and 8.3 inches in height. The VEVOR and Vimke models share these exact compact dimensions. These low-profile designs allow you to drill into vertical steel surfaces where clearance is limited.
How much does the Zinnore 1150W weigh?
The Zinnore 1150W Magnetic Drill Press weighs 32.3 pounds. It is heavier than the iMeshbean 1380W and the VEVOR, but lighter than the ZELCAN 1550W. Its dimensions are 8.54 inches wide and 17.3 inches tall, making it less compact than the low-profile options but still manageable for portable drilling tasks.