FinerFurnis 1.57 Inch Mag Drill Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for finerfurnis 1 57 inch mag drill alternatives to compare against the original FinerFurnis 1550W model. This magnetic drill press offers 1550W of power and a 13000N magnetic base for secure mounting. It drills holes up to 1.57 inches with ten adjustable speeds reaching 820 RPM. The double dovetail guide ensures precise vertical feed for accurate results.
You might want a different option if you need a larger 2-inch capacity or a lighter weight for easier portability. Some users may prefer variable speed controls or different motor wattages for specific metal fabrication tasks. We selected these seven alternatives because their published specifications overlap with the original. This list includes models from VEVOR, ZELCAN, Acekool, and Festisoul. Each pick shares key features like magnetic configuration and metal drilling targets. You can compare the specs to find the best fit for your needs.
Our top pick: FinerFurnis 1550W 10-Speed Magnetic Drill Press.
How these mag drills differ
VEVOR 1550W 2-Inch Magnetic Drill Press
The VEVOR 1550W model increases your hole capacity to 2 inches, compared to the 1.57-inch limit on the FinerFurnis. It weighs 39 pounds, making it significantly heavier than the 28.7-pound FinerFurnis. This extra mass supports its 2-inch diameter capability. You get variable speed control instead of the FinerFurnis fixed ten-speed settings. The larger footprint requires more storage space. Choose this if you need to drill larger holes in mild steel regularly. The trade-off is reduced portability and a bulkier design for site work.
ZELCAN 1550W 2-Inch Magnetic Drill Press
The ZELCAN unit also handles 2-inch holes, offering greater capacity than the FinerFurnis. It weighs only 23.8 pounds, which is lighter than the 28.7-pound FinerFurnis. This makes it easier to carry to job sites. It shares the 1550W motor power but likely has a lower maximum RPM than the FinerFurnis. You gain larger drilling range and portability. You lose the precise ten-speed control and potentially the higher top speed. Pick this for heavy fabrication where you need large holes but want to carry the tool easily.
VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
The VEVOR 1.6-Inch model has a slightly larger 1.6-inch capacity versus the 1.57-inch FinerFurnis. It uses a 1450W motor, which is less powerful than the 1550W FinerFurnis. It weighs 26.5 pounds, lighter than the FinerFurnis. You get variable speed control and a more compact body. The reduced motor power may affect performance in very thick steel. Choose this if you prioritize a lighter weight and variable speed adjustments over maximum raw power and the specific ten-speed settings of the FinerFurnis.
VEVOR 1400W 1.6-Inch Magnetic Drill Press
This VEVOR 1400W model offers a 1.6-inch capacity, slightly larger than the FinerFurnis. It has a 1400W motor, providing less power than the 1550W FinerFurnis. At 27.3 pounds, it is lighter than the 28.7-pound FinerFurnis. You gain a compact design and a twist drill adapter. You give up some drilling power and the specific ten-speed control of the FinerFurnis. This model fits users who need a portable solution for thick steel plates but do not require the full 1550W output of the original.
Acekool 1650W Magnetic Drill, 1.57 in
The Acekool 1650W model provides more power than the 1550W FinerFurnis. It matches the 1.57-inch hole capacity. It weighs 34.2 pounds, making it heavier than the 28.7-pound FinerFurnis. You get higher motor wattage for demanding tasks. The increased weight reduces portability. The design is less compact than the FinerFurnis. Select this if you need extra power for steel fabrication and do not mind the additional weight. It is a robust option for industrial maintenance where stability and power matter more than ease of transport.
Festisoul 1450W 1.57-Inch Magnetic Drill Press
The Festisoul 1450W model has a 1.57-inch capacity, matching the FinerFurnis. It uses a 1450W motor, which is slightly less powerful than the 1550W FinerFurnis. It weighs 27.2 pounds, lighter than the 28.7-pound FinerFurnis. You gain a more portable unit with a twist drill adapter. You lose some motor power and the ten-speed control of the FinerFurnis. This is a good choice for structural steel work where you need a twist bit adapter but want a lighter tool than the original.
Quick picks
Our 7 picks
FinerFurnis 1550W 10-Speed Magnetic Drill Press
Best for: Precision metal fabrication and construction
- Motor Power
- 1550W
- Spindle Speed
- 10-Speed Control, up to 820 RPM
- Hole Capacity
- 1.57 to 2 in (40-50mm)
- Spindle Travel
- up to 2 in
- Magnetic Force
- 2922 Lbf / 13000N
- Configuration
- Magnetic
View on Amazon: FinerFurnis 1550W 10-Speed Magnetic Drill Press
This magnetic drill press features a 1550W motor and a 2922 lbf magnetic base for secure attachment to steel. It offers 10 speed settings up to 820 RPM and a 1.57-inch hole capacity. The double dovetail guide ensures accurate vertical feed. It weighs 28.7 pounds. You will find this tool suitable for fabrication and construction work on metal surfaces.
Pros
- 1550W motor provides reliable power for heavy-duty drilling
- 2922 lbf magnetic base ensures secure adhesion
- 10-speed control allows adjustment up to 820 RPM
- Double dovetail guide minimizes wobble for precision
Cons
- 1.57-inch capacity is smaller than 2-inch alternatives
- 28.7-pound weight adds bulk for portability
- Spindle travel limited to 2 inches
Good fit if
- You need precise vertical feed for fabrication
- You work on flat or vertical steel surfaces
- You require 10-speed adjustments for different materials
Skip if
- You need to drill holes larger than 1.57 inches
- You require a 2-inch drilling capacity
- You prefer a lighter tool for overhead work
Verdict: FinerFurnis 1.57" Mag Drill Press fits users who prioritize precision and secure mounting for metal fabrication tasks.
VEVOR 1550W 2-Inch Magnetic Drill Press
Best for: Heavy-duty mild steel drilling
- Motor Power
- 1550W
- Spindle Speed
- 0-550 RPM
- Hole Capacity
- 2" / 50 mm
- Spindle Travel
- 2" / 50 mm
- Magnetic Force
- 2922 lbf / 13,000 N
- Configuration
- Magnetic
The VEVOR 1550W magnetic drill press offers a 2-inch hole capacity and 2922 lbf holding force. It features variable speed control from 0 to 550 RPM and a 2-inch spindle travel. This portable unit weighs 39 pounds and includes a built-in scale for precise measurements. It is designed for drilling through steel plates at least 0.39 inches thick.
Pros
- 1550W motor provides strong drilling power
- 2922 lbf magnetic force ensures stability
- 2-inch max hole capacity for larger holes
- Built-in scale aids precise positioning
- Variable speed from 0 to 550 RPM
Cons
- Lower maximum speed of 550 RPM compared to 820 RPM rivals
- Heavier 39-pound build reduces portability
- Not suitable for stainless steel or cast iron
Good fit if
- You need a 2-inch drilling capacity
- You work primarily with mild steel plates
- You value high holding force for stability
Skip if
- You require speeds above 550 RPM
- You need to drill stainless steel
- You prefer a lighter unit under 30 pounds
Verdict: VEVOR 1550W 2" Mag Drill fits users who prioritize maximum hole size and holding power over higher rotational speeds. It is a solid choice for heavy-duty mild steel fabrication where stability is key.
ZELCAN 1550W 2-Inch Magnetic Drill Press
Best for: heavy-duty metal fabrication and construction
- Motor Power
- 1550W
- Spindle Speed
- 0-580 rpm
- Hole Capacity
- 2"
- Magnetic Force
- 13000N (2,922 lbf)
- Configuration
- Magnetic
- Target Material
- Metal
The ZELCAN 1550W Mag Drill Press offers a 2-inch boring diameter and 13000N magnetic force. It features stepless speed control from 0 to 580 rpm and a reversible motor. The unit includes a coolant tank and depth scale for precision. This portable design suits heavy-duty metal fabrication and construction tasks where secure anchoring and adjustable speeds are necessary.
Pros
- 1550W copper motor delivers strong drilling power
- 2-inch boring diameter handles large holes
- 13000N magnetic force anchors securely in any orientation
- Stepless speed control ranges from 0 to 580 rpm
Cons
- Maximum spindle speed of 580 rpm is lower than competitors reaching 820 rpm
- Fixed stepless control lacks distinct preset speed options
- Includes only a basic coolant tank without a pump system
Good fit if
- You need a portable drill for vertical or overhead metal work
- You require stepless speed adjustment for precise hole sizing
- You prioritize high magnetic holding force for safety
Skip if
- You need speeds above 580 rpm for small bits
- You prefer preset speed settings over stepless control
- You require a built-in pump for continuous coolant flow
Verdict: ZELCAN 1550W Mag Drill Press fits users who need reliable 2-inch capacity and strong magnetic anchoring for heavy metal tasks, though its lower max speed suits slower, precise work over high-speed drilling.
VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
Best for: portable steel drilling with depth accuracy
- Motor Power
- 1450W
- Spindle Speed
- 0-800 RPM (10-speed)
- Hole Capacity
- 1.6 in (40 mm)
- Spindle Travel
- 2 in / 50 mm
- Magnetic Force
- 2810 lbf / 12500 N
- Configuration
- Magnetic
View on Amazon: VEVOR 1.6-Inch Variable Speed Magnetic Drill Press
This VEVOR magnetic drill press features a 1450W motor and 2810 lbf holding force. It drills up to 1.6 inches with 10-speed settings from 0-800 RPM. The 2-inch spindle travel and 26.5-pound weight make it portable. You get a scale for depth control and overload protection. It suits steel fabrication and industrial work on plates 0.39 inches thick or more.
Pros
- 1450W motor provides 2810 lbf magnetic force
- 10-speed variable control from 0-800 RPM
- Built-in scale for accurate depth measurement
- Titanium magnesium alloy guide rail resists wear
Cons
- 1450W motor is lower than the 1550W competitors
- 2810 lbf holding force is less than 2922 lbf rivals
- Not suitable for stainless steel or cast iron
Good fit if
- You need a portable drill for steel plates over 0.39 inches
- You want variable speed control for precise drilling
- You require overload protection for safety
Skip if
- You drill stainless steel or cast iron
- You need holding force above 2810 lbf
- You require a motor above 1450W
Verdict: VEVOR 1.6 in Mag Drill Press offers solid 1450W power and 10-speed control for steel fabrication. You should choose this if you prioritize portability and depth accuracy over maximum magnetic force.
VEVOR 1400W 1.6-Inch Magnetic Drill Press
Best for: portable steel fabrication and thick plate drilling
- Motor Power
- 1400W
- Spindle Speed
- 800 RPM
- Hole Capacity
- 1.6 in / 40 mm
- Spindle Travel
- 2 in / 50 mm
- Magnetic Force
- 2810 lbf / 12500N
- Configuration
- Magnetic
This VEVOR magnetic drill press offers a 1.6-inch boring diameter and 2810 lbf magnetic force. Its 1400W motor runs at 800 RPM, providing solid power for steel fabrication. The unit includes 11 coring bits and a scale for precise depth control. It is designed for portable use on metal surfaces. This tool suits users needing reliable performance for industrial or home improvement tasks on thick steel plates.
Pros
- 1400W copper motor delivers strong driving force
- 2810 lbf magnetic base anchors securely at any angle
- Includes 11 coring bits for varied drilling needs
- Built-in scale helps pinpoint drilling depth accurately
Cons
- 1.6-inch capacity is smaller than 2-inch alternatives
- Not suitable for stainless steel or cast iron
- Requires steel plate thickness of at least 0.39 inches
Good fit if
- You need a portable drill for steel fabrication
- You require a strong magnetic hold on vertical surfaces
- You want a unit with included coring bits
Skip if
- You need to drill stainless steel or cast iron
- You require a boring diameter larger than 1.6 inches
- You are working on steel plates thinner than 0.39 inches
Verdict: VEVOR 1.6 in Mag Drill 1400W provides a compact, powerful solution for drilling thick steel. It fits users who prioritize magnetic stability and portability over maximum hole size.
Acekool 1650W Magnetic Drill, 1.57 in
Best for: precision drilling in steel fabrication
- Motor Power
- 1650W
- Spindle Speed
- 10-speed, 810 RPM
- Hole Capacity
- 1.57 in (40 mm)
- Spindle Travel
- 50 mm
- Magnetic Force
- 2922 lbf
- Configuration
- Magnetic
This portable magnetic drill features a 1650W motor and 2922 lbf magnetic force. It handles 1.57-inch hole capacity with a 10-speed variable control up to 810 RPM. The titanium-magnesium alloy guide rail offers durability. It suits users needing precise, heavy-duty drilling in metal or plastic. The design includes an integrated millimeter scale for accuracy.
Pros
- 1650W pure copper motor provides high torque
- 2922 lbf magnetic base ensures stability
- 10-speed variable control reaches 810 RPM
- Titanium-magnesium alloy guide rail resists wear
- Integrated millimeter scale aids precision placement
Cons
- Heavier at 34.2 pounds than lighter alternatives
- Lower max speed of 810 RPM limits some applications
- Shorter 50 mm spindle travel restricts deep hole work
Good fit if
- You need strong magnetic force for vertical drilling
- You require variable speed control for different materials
- You value precision scales for accurate hole placement
Skip if
- You prefer lighter tools under 30 pounds
- You need higher speeds above 810 RPM
- You require deeper drilling than 50 mm
Verdict: Acekool 1650W 1.57" Magnetic Drill delivers robust power and precision for industrial maintenance. It fits operators who prioritize stability and accuracy over portability and high speed.
Festisoul 1450W 1.57-Inch Magnetic Drill Press
Best for: structural steel drilling with twist bit versatility
- Motor Power
- 1450W
- Spindle Speed
- 10-speed, up to 820 RPM
- Hole Capacity
- 1.57 in
- Magnetic Force
- 13000N
- Configuration
- Magnetic
- Target Material
- Metal
View on Amazon: Festisoul 1450W 1.57-Inch Magnetic Drill Press
The Festisoul 1.57 inch magnetic drill press features a 1450W motor and 13000N magnetic base for secure vertical or overhead drilling. It offers 10 speed settings up to 820 RPM and includes a twist drill adapter for standard bits. The double dovetail column ensures stable feed. This unit weighs 27.2 pounds and measures 16.1 inches in height. It suits users needing reliable core drilling in structural steel.
Pros
- 1450W motor delivers reliable power for steel drilling
- 13000N magnetic base secures the drill on vertical surfaces
- Double dovetail column provides smooth, stable feed with minimal wobble
- Includes twist drill adapter for versatile bit usage
Cons
- 1.57 inch capacity is smaller than the 2 inch options on this list
- 820 RPM max speed is lower than the 1550W models reaching higher speeds
- 1450W motor is less powerful than the 1550W competitors
Good fit if
- You need a magnetic drill for structural steel work
- You require a twist drill adapter for standard bits
- You prioritize stable feed precision over maximum capacity
Skip if
- You need to drill holes larger than 1.57 inches
- You want the highest possible drilling speed available
- You prefer a motor with more than 1450W power
Verdict: Festisoul 1.57" Mag Drill Press fits users who need stable, precise core drilling in steel with the added flexibility of a twist drill adapter. It is a solid choice for structural work where capacity and raw speed are secondary to stability.
Specifications side by side
| Spec | FinerFurnis 1550W 10-Speed Magnetic Drill Press | VEVOR 1550W 2-Inch Magnetic Drill Press | ZELCAN 1550W 2-Inch Magnetic Drill Press | VEVOR 1.6-Inch Variable Speed Magnetic Drill Press | VEVOR 1400W 1.6-Inch Magnetic Drill Press | Acekool 1650W Magnetic Drill, 1.57 in | Festisoul 1450W 1.57-Inch Magnetic Drill Press |
|---|---|---|---|---|---|---|---|
| Motor Power | 1550W | 1550W | 1550W | 1450W | 1400W | 1650W | 1450W |
| Spindle Speed | 10-Speed Control, up to 820 RPM | 0-550 RPM | 0-580 rpm | 0-800 RPM (10-speed) | 800 RPM | 10-speed, 810 RPM | 10-speed, up to 820 RPM |
| Hole Capacity | 1.57 to 2 in (40-50mm) | 2" / 50 mm | 2" | 1.6 in (40 mm) | 1.6 in / 40 mm | 1.57 in (40 mm) | 1.57 in |
| Spindle Travel | up to 2 in | 2" / 50 mm | not specified | 2 in / 50 mm | 2 in / 50 mm | 50 mm | not specified |
| Magnetic Force | 2922 Lbf / 13000N | 2922 lbf / 13,000 N | 13000N (2,922 lbf) | 2810 lbf / 12500 N | 2810 lbf / 12500N | 2922 lbf | 13000N |
| Configuration | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic |
| Speed Settings | not specified | Variable Speed | not specified | Variable Speed | not specified | not specified | not specified |
| Motor Wattage | 1550W | 1550W | 1550W | not specified | not specified | not specified | not specified |
| Target Material | Metal | Metal | Metal | Metal | Metal | Metal, Plastic | Metal |
| Design | not specified | Portable | Portable | Portable | Portable | Portable | not specified |
| Intended Use | not specified | DIY | not specified | not specified | not specified | not specified | not specified |
| Cutting Width | not specified | not specified | not specified | 6-Inch | 6-Inch | not specified | not specified |
| Weight | 28.7 pounds | 39 pounds | 23.8 pounds | 26.5 pounds | 27.3 pounds | 34.2 pounds | 27.2 pounds |
| Dimensions | not specified | 14.2 × 5.1 × 17.3 inches | 9.8 × 4.9 × 13 inches | 11 × 7.3 × 14.2 inches | 8.27 × 15 × 11.4 inches | 20.9 × 5.91 × 17.1 inches | 13.2 × 6.3 × 16.1 inches |
| Size | 1.57" / Speed adjustable /Twist drill adapter | (W/ 2" - (NEW)) | not specified | 1.6 in 2PCS | 1.6 in (11 Bits) | 1650W-1.57" with Speed Control | 1.57" / Twist drill adapter |
| Model | MYN-f4JfQf7MXFTAt9gp4C | MD-50A | J1CD-35S | ZT-45H | ZT-40HA | 09WmFXKP8DtHgEkYncFpNwN4k | LtfwJ3orGHqhtyfkv1PYVQqzDV86K |
| Color | not specified | Orange | not specified | Orange | Black + Yellow +Gray | not specified | not specified |
For smaller fastening tasks, you can compare the best drill drivers with 1 4 inch by their specifications.
Frequently asked questions
Which magnetic drill offers the highest hole capacity in this list?
The VEVOR 1550W 2-Inch Magnetic Drill Press provides the largest drilling capacity at 2 inches. This model also weighs 39 pounds, which is the heaviest option listed. Its design prioritizes holding power and stability for heavy-duty mild steel fabrication over higher rotational speeds.
What is the lightest magnetic drill press available here?
The ZELCAN 1550W 2-Inch Magnetic Drill Press is the lightest option at 23.8 pounds. It measures 9.8 inches in length and 4.9 inches in width. This compact size makes it suitable for users who need reliable anchoring without the bulk of heavier industrial models.
Which model includes a twist drill adapter for versatility?
The FinerFurnis 1550W 10-Speed Magnetic Drill Press includes a twist drill adapter. The Festisoul 1450W 1.57-Inch Magnetic Drill Press also features this adapter for added flexibility. These tools allow you to switch between standard magnetic drilling and traditional twist bit operations for structural work.
Which drill is best suited for precision metal fabrication?
The FinerFurnis 1550W 10-Speed Magnetic Drill Press is rated for precision metal fabrication. It weighs 28.7 pounds and features ten adjustable speeds. This configuration helps users secure mounting and achieve precise holes in steel, making it a strong choice for detailed construction tasks.
How does the VEVOR 1400W model differ from the 1550W version?
The VEVOR 1400W 1.6-Inch Magnetic Drill Press uses a 1400W motor, while the 1550W version uses a 1550W motor. The 1400W model weighs 27.3 pounds and measures 15 inches wide. It focuses on portability and magnetic stability for thick plate drilling rather than maximum hole size.
Is there a magnetic drill that can handle plastic materials?
The Acekool 1650W Magnetic Drill lists metal and plastic as target materials. It weighs 34.2 pounds and measures 20.9 inches in length. This model delivers robust power and precision, fitting operators who prioritize stability and accuracy for industrial maintenance tasks involving various material types.
Which drill offers variable speed control for depth accuracy?
The VEVOR 1.6-Inch Variable Speed Magnetic Drill Press offers ten-speed control for depth accuracy. It weighs 26.5 pounds and features a 1450W motor. You should choose this if you prioritize portability and precise depth control over the maximum magnetic force found in heavier models.
What is the weight difference between the heaviest and lightest models?
The heaviest model is the VEVOR 1550W 2-Inch Magnetic Drill Press at 39 pounds. The lightest is the ZELCAN 1550W 2-Inch Magnetic Drill Press at 23.8 pounds. The difference is 15.2 pounds, reflecting the trade-off between maximum capacity and portability in these tools.